|
|
HMC Chucks feature the "Perma Fix" Roll Lock System, with its long fine slots of the internal bore, is an integral part of the entire body. This design assures ultra accuracy and rigidity. When tightening the nut, the needle roller bearings rise on the exterior taper of the chuck body and clamp evenly around the entire 360° tool perimeter. As a result, the greater the clamping pressure, the higher the concentricity.
Superior steel alloy allows tough hardening treatment for greater durability. The New Hi-Power Milling Chuck can be operated thousands of times before even the slightest wear will become apparent. The patented pin mechanism assures positive non-slip locking for large diameter 2" shank cutters under the heaviest cutting conditions.
|
|
- Provides 4-5 times the gripping force of a collet chuck
- Each taper is precision ground to a tolerance of AT3 or better!
- T.I.R. of only 0.0002" rivals shrink-fit
- Factory balanced to 10,000 RPM for high speed operation
- Constructed of special steel for maximum rigidity & finish
- All products are backed by our 100% satisfaction guarantee
Advantages:
- Provides excellent tool life and saves money by reducing tooling expenses
- Extreme holding power and rigidity for precise milling operations
- Excellent repeatability and low T.I.R. of 0.0002"
- Insert sleeves are available to fit different size tool shanks
- Fast and easy tool changes using conical screw mechanism
|
|
Chucking
Universal and milling chucks
- Expansion chucks
- End mill holders
- Face end mill arbors
- Combi-shell end mill arbors-NC
- Auto-lock chucks
|
|
| ... products without technical information |
| |
Types of lamella
We use three basic forms to fasten the lamellas. The different product types and their designations result from these three basic forms of fastening. The product types FASTAF/FASTAC have fixed mounted lamellas. Flexibly mounted lamellas are used in the FASTAM/FASTLAP product types. These flexibly mounted lamellas are offered in two different versions, according to the conditions of use with hinge 2) or clip 3). It is also possible to choose between versions of the hinge type with or without initial tension.
|
|
|
|
|
|
Steel Telescopic Covers
Beakbane Steel Telescopic Covers are designed to protect machine tool slideways and are precision-built for optimum efficiency. Over the last three decades, Beakbane has developed and refined its design know-how and understanding of the requirements of machine tool builders to the point where it is an acknowledged international leader in its field.
The protection of machine tool slideways is essential if machine tool accuracy is to be maintained, down time reduced, and associated maintenance costs avoided.
By working closely with machine tool builders and adjusting quickly to the demands of the latest technology, Beakbane Steel Telescopic Covers have become an integral part of many machine tool designs. We cannot stress too strongly the importance of the cover requirements being considered at the design stage if maximum efficiency and cost benefits are to be achieved.
Our computerised design programme provides data for the precision manufacture of Beakbane Covers. This ensures instant recall of all information needed for repeat orders: also, as an indication of the precision in our manufacturing procedures, it enables us to replace a damaged 'box' in a cover when required.
The individual boxes that make up each cover are interlinking, and depending on the box structure, can be sufficiently rigid to support the weight of an operator when the cover is stationary.
Wiper seals are fitted, as required, to the leading edge of all boxes with the exception of the smallest. The wiper is pressure loaded so preventing the ingress of swarf and other unwanted foreign bodies. The wiper itself is made from hardwearing polyurethane or nitrile rubber, protected in its own steel case from hot chips and swarf.
|
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired.
|
|
ARNO ARNOLD conceived, designs and manufactures Fix& of finish complete cover systems. Independently of size and excerpt our patented system of the rear sheet metals ensures Outside into for gap-free pressure. We can consider mechanical measured variables (statics and dynamics), as well as environmental influences (e.g. liquids, temperature and chemical reactions).
The products and systems developed by us have themselves already under extreme conditions proven in horizontal/vertical processing centers, sharpening and milling machines... etc.
|
|
|
Protective cover complete systems are supplied as overall construction assembly-fairly as unit and installed ready for use to the machine tool. ARNO ARNOLD conceived, designs and manufactures Fix& of finish systems for processing centers, cutting machine tools, deburring centers, erosion machines etc.
|
|
The base is standard bellows of slide, which offers an additional protection by telescopic aluminum or the steel sheet addition on request. We recommend his use in the event of intensive projections of chips hot and/or cutting.
The plates resist the acids and can be realized according to your possibilities of obstruction.
|
|
| ... products without technical information |
| |
All advantages given by the permanent-electro magnetic chucks combined with the flexibility of a system designed for horizontal spindle machine tools.
With Cubotec it’s easy to fix pieces with different shape and dimension, as well with surfaces bigger than clamping area, using the full strokes of the machine.
Unique characteristics of stability, rigidity and robustness are achieved by the solid block construction made from a solid block of steel.
The subsequent integration of the magnetic circuit Super-Quad into the bee-hiving structure makes it possible to leave neutral zones for an easy positioning of reference pins and stops.
Cubotec is available in 2 different configurations:
C1: 1 face with magnetic surface, the other with T-slots for conventional clamping of a-magnetic material.
C2: with both faces with magnetic surface.
|
|
WALKER BRAILLON MAGNETICS chuck's range offers efficient and reliable solutions for every milling applications.
Due to its extremely strong construction and reliable watertighness, WALKER BRAILLON MAGNETICS chucks provide efficient and stable clamping solutions.
WALKER BRAILLON MAGNETICS clamping systems differ from other systems through thier unique design which allows a maximal flux concentration, thus an extremely strong clamping force.
|
|
Magnetic chucks for Rail Milling
Thanks to 15 years as world leader in rail clamping applications, WALKER BRAILLON MAGNETICS offers efficient and state-of-the-art Magnetic Clamping Sytems for rail milling machines.
|
|
The TRT series.
The TRT (Turning Rotary Table) series is designed for vertical lathes and gantry type machines for milling and boring. Within the range, the design can be adapted according to each application and can be delivered either as an integrated axis, stand alone variation or as a sliding unit. For positioning and milling, an excellent quality of control is reached through the master-slave configuration. Also available are linear axes specially constructed and perfectly adapted to individual applications.
|
|
| ... products without technical information |
| |
|
|
|
|
The FRITSCH Soil Deagglomerator almost completely automates the deagglomeration of soil samples and simultaneous removal of stones and a high sample throughput.
Field of application
Preparation of soil samples for chemical and physical analysis, e.g. to determine the active ingredients relative to crop yield or identification of pollutants. Agglomerates are reduced to 2 mm grain size, e.g. as per the sewage
sludge code or DIN 19683.
Method of operation
Agglomerated soil samples are crushed by the combined forces of impact and friction. Rotating spiral nylon brushes in a cylindrical grinding chamber gently deagglomerates the sample, simultaneously conveying the sample along a 2 mm perforated plate within the chamber. The processed sample is collected in a container at the base of the mill, whilst larger components (stones, glass, wood, etc.) are retained and finally separated out at the end of the grinding chamber.
Advantages
- Gentle deagglomeration
- No crushing of stones
- Automatic removal of components > 2 mm
- Self-cleaning is effected by the rotating brushes which convey all material through the system
- Dust free operation through specially designed sealing
system
- Connection for dust extraction
- Accurate short-time timer for reproducible grinding conditions
- Continuous operation also possible
- Safety tested (CE mark)
- Speedy size reduction
- Easy to clean
- Overload protection
- 2 year guarantee
|
|
The Sturtevant Hammermills provide unexcelled general size reduction for virtually any dry friable material.
Benefits
* Material reduced by impact from swinging bar hammers
* Product size controlled by grates and screen sizes
* Materials reduced to granular powder at a high rate
* Heavy-duty cast iron construction
* Easy access for maintenance and screen change
|
|
| ... products without technical information |
| |
... see all the products in the category
Mills
|
Renishaw probe systems provide an innovative solution to improve the efficiency of your machine tools.
Tool setting can measure the size of tools before cutting starts, and to check for tool damage or breakage during the machining operation.
|
|
| ... products without technical information |
| |
PG Marking, punching and drilling machine for plates and gussets
PG range: PG 83 PG 83 P PG 116 PG 116 S PG 116 P PG 2000
Simple, inexpensive and fast machines
The machines from the PG range are powerful and fast, while combining at the same time operations such as marking, punching, drilling, pop marking, deburring and tapping for working on large-size plates and gussets (up to 2000 x 1000 x 40 mm).
The layout of the clamps inside the machine gooseneck frees the working space and makes handling of parts to machine easy.
Easy programming and use thanks to the computer-assisted manufacturing softwares and the numeric control system.
The machines in the PG range are inexpensive and fast, and satisfy most requirements in a structural steel workshop. The layout of the clamps gives the operator space and safety, important factors ensuring high productivity.
|
|
|
This is the most modern, rapid and flexible CNC line to punch plates. Its main features are: low-cost; easy installation; reduced dimensions; easy programming; flexibility for small/medium size pieces. Besides the multi-tool punching station, a marking tool and a drilling head are also available. The plate positioning is granted by a two-pincher coordinate table assuring high precision while processing.
|
|
The L-743 Triple Scan Laser Alignment System is one of only 2 lasers (the other is the L-733) in the world to offer 3 automatically rotating laser planes that are accurate enough for today's ever-increasing tolerances. This creates a powerful tool to not only MEASURE but also FIX problems in a fraction of the time needed with conventional methods. From machine tools to aircraft assembly, the L-743 is the best alignment system on the market today.
|
|
|
|
see the results for the following category : 
