|
|
Low-profile clamps come in two basic models, one with a single-wedge and the other with a double-wedge construction. In addition, we offer a line of machinable jaw models for workpieces of irregular shape and a special model for casting and wire EDM applications
Standard models come with a hardness of 48-52 HRC and the jaws are serrated or smooth, depending on model. Both the wedge and the jaws are made of tool steel and are through hardened. Fastening operation involving one bolt (M5-16) ensures quick set up times.
|
|
|
Suited for the heavy chip removal. This system will substantially increase the productivity of any machining center. Put all your favorite fixtures on MTS Pallets and gain productive time. Because the pallets are positioned and ready to go in seconds.
|
|
Power-Grip
Userfriendly modular pallet system
Reduce set up time by changing the palletized work pieces in only seconds. Power grip guaranties an interference free machining under the most difficult environment with 750,000 clampings without loosing the reference and 0.002 mm system accuracy.
The simple and unproblematic clamping system can be arranged to meet your individual needs.
Customers Advantages:
- Rugged, productivity increasement
- Mount and adjust only once
- Production on all machine tables
- Minimized maintenance (low extra costs)
- Dirt immunity
- Fully automatic operation
|
|
FRESMAK TOMBSTONES AND CUBES
Fresmak produces cubes and tombstones for horizontal machining centres for the vices ARNOLD mat and ARNOLD twin in there different versions and sizes. The standard items are:
for the ARNOLD mat in sizes 090, 125, 160 and 200:
- Duo Base Plate
- Double Duo Base Plate
- Cube 4x90º
for the ARNOLD twin in sizes 090 and 125:
- Duo Base Plate
- Double Duo Base Plate
- Cube 4x90º
This items can also be made as per customers indication.
|
|
The high ressure vice ARNOLD IZ1 is a vice that can be automized and needs to be connected to a hydraulic group with a pressure of 300 bar. It is a vice of reduced size but large clampling range. This model has been developed for fast clamping systems.
Particular characteristics:
Jaw Width 125 mm.
Material: Steel
Highly accurate: Repeatability is within 0,01mm.
All critical components are hardened and ground.
Double acting hydraulic cylinder.
Cylinder completely encapsulated.
Easiest maintenance.
The clamping force is proportional to the applied hydraulic pressure.
A pressure of 250 bar does generate a clamping force of 2 tons.
Ideal for vertical and horizontal machining centers, tombstones, etc.
Longitudinal and transverse key slots 20H7.
Automatic clamping travel of 15mm.
Posibility to order several vices assembled in one base plate.
Posibility to adapt special jaws to the workpieces.
Vices individually numbered and registered.
|
|
ARNOLD IZ2 hydraulic clamping
The high ressure vice ARNOLD IZ1 is a vice that can be automized and needs to be connected to a hydraulic group with a pressure of 300 bar. It is a vice of reduced size but large clampling range. This model has been developed for fast clamping systems.
Particular characteristics:
Jaw Width 100 mm.
Material: Steel
Highly accurate: Repeatability is within 0,01mm.
All critical components are hardened and ground.
Double acting hydraulic cylinder.
Easiest maintenance.
The clamping force is proportional to the applied hydraulic pressure. A pressure of 250 bar does generate a clamping force of 1.9 tons.
Ideal for vertical and horizontal machining centers, tombstones, etc.
Longitudinal and transverse key slots 20H7.
Automatic clamping travel of 15mm.
Posibility to order several vices assembled in one base plate.
Posibility to adapt special jaws to the workpieces.
Vices individually numbered and registered.
|
|
Locking units are capable of retaining forces in both axial directions. They are used in a wide variety of machines. In most versions the clamping is spring actuated, and hydraulic or pneumatic pressure is required to release it. Shaft diameters range from 10 to 250 mm. The respective holding forces vary from 0.1 to 1000 kN, depending on style and customer requirements.
If the device is used as a restraint device and emergency brake in machine tools, a special version KFHW is available. For this reason, all the external parts and sealing surfaces are made of stainless steel.
|
|
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
The slightly concave front surface and the rear finger grips guarantee an ergonomic position of the hand, allowing the operator to apply the maximum torque with the minimum force.
|
|
|
|
|
|
This product group covers mechanical clamping elements like T-Nuts, Fixture Nuts, Down-Thrust Clamps, Floating Clamps, Down-Hold Clamps, Spherical Washers / Conical Seats, Supporting Elements, Centering Clamping Elements, Clamps, Locating Clamps, T-Slot Clamps, Taper Clamping Units, Clamping Clamps
The new part "Compact Clamp with moveable clamping lever" can be used for universal application - in either horizontal or vertical position - in machined and raw work pieces.
- exact and position precise clamping
- ease of operation
- high clamping force at low torques, abrasion- resistant due to clamping
lever with bearings
- continuous, large clamping area
- clamping lever entirely retractable for hindrance-free exchange of work
pieces
- clamping lever with locating thread for diverse clamping elements, e.g.
ball-ended thrust screws (EH 2270. - EH 2272.), self-aligning pads (EH
2273./ EH 2274.),
- large adjusting range at constant clamping force
- easy and flexible fixing possibilities
- corrosion-resistant
- insensitive to dirt and chips.
|
|
MISUMI provides more than 1 Million mechanical components for the assembly automation. We delivery components europewide in averagely 6-8 days GUARANTEED delivery from the day of purchase, stock items available from 2 days delivery.
MISUMI 24/7 Web Ordering System (WOS) represents a full-fledged e-Commerce solution, which you can use, for the first time, independently from the catalogue in paper form, to configurate MISUMI products, submit quotations and place orders.
For more information about MISUMI, WOS or for ordering a catalogue please visit: www.misumi-europe.com
MISUMI - Precisely Meeting Your Demands
|
|
air/hydraulic fixtures - stationary
3c, 5c, 16c, 22c, 35c or 44c models
Fast acting - positive location
Fixed or draw type colet designed
operating pressure up to 1500 PSI
coolant flush as standard
Qualified boss for mocation
|
|
|
Our engineering department has more than 40 years of experience in the development and manufacturing of Customer specific Clamping Systems. From mechanical up to fully automatic clamping technologies, we offer economic solutions with best price - performance ratios.
|
|
pneumatic control
Standard features
full automatic cycle
fast positive clamping
fixed collet position
1 vertical or 3 horizontal mounting surfaces
self contained
positve index position
minimum heught
fully pneumatic
easily intalled and maintained oil mist lubrication
backed by spare parts inventory
|
|
|
The cube type C.E.8. 93 is the appropriate tool to use contemporaneously vices from the series Europe 99 in vertical. It is the ideal solution to reduce the production time on C.N. having the possibility to increase the quantity of workpieces. Buildt in cast iron mechanics G 30 stabilized, offer max. guaranty, rectifieded on supportface, assure centesimal tolerance.
|
|
eccentric self locking clamping devices
CAM-SYSTEM “t”
Set CAM SYSTEM “t” complete with:
N. 4 CAM SYSTEM “t”
N. 4 fixed block CAM SYSTEM ‘t’
N. 8 pair of T-nuts with screw
N. 1 key for CAM SYSTEM ‘t’
wooden packing case
|
|
|
|
|
|
Horizontal Zeropoint Quickclamping cylinder with piston-catching
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Size: K20, K40
Explanation:
With our new Zeropoint Quickclamping cylinder with piston-catching, we make the palletizing asier and quicker.
• No search of drilling
• No damage of zero point drilling and nipples
• No risk of injury
Releasing and taking out of the pallet, take place still faster and simpler, because of the linking with the crane which is not more necessary during the release phase
Thanks to the speed of pelletizing, you reduce considerably your pelletizing period and consequently your costs.
Advantages:
• With and without blow out
• Completely in stainless steel
• Applicable in all positions without fit-up aids
• When the mechanism is out of service, the piston-catching stay out, it can be locked, thus the discs spring are not forced.
Can be integrated in:
• Clamping towers
• Clamping angles
• Automatized handling devices
• General mechanical
Note:
As standard, there is a manual or hydraulic advance motion of the piston-catching.
On request:
- Installation diagrams on request
|
|
In modern industry the precision of machining, the quality of the product, staff and plant safety, as well as quick clamping and release of the pieces being machined, are essential factors in the company’s productivity and competitiveness
Thanks to their compactness and efficiency, OLMEC high pressure clamping systems significantly reduce times. Constructed using heat-treated titred steel, with low-friction bronze guides, they are assembled with seals of various types such as filled Teflon, Polyurethane and O-rings. The maximum temperature of the pressurized fluid must not exceed 60°C; if higher temperatures are envisaged, specify this on order so that the cylinders can be fitted with suitable seals.
The combination of clamping cylinders with pneumohydraulic pumps or boosters forms a complete work unit, ensuring increased productivity and rise quality.
|
|
|
|
|
|
At the very latest when, because of a power failure (intentional or not) or a malfunction something has to be done to safeguard man and machine, hydraulic clamp Ratio-Clamp® - the clamping device from Hänchen - is just what you need.
Boasting a retention force of up to 450 kN, the hydraulic clamp holds the piston rod in whatever position it is in at that particular moment. Without having to rustle up some extra power (no extra energy) and for an unlimited period of time. The clamping device Ratio-Clamp® is approved by the German Technical Inspection Agency (TÜV). Nor does the development of specific solutions (larger rod diameters, intermediate sizes, greater clamping forces…) pose a problem to the Hänchen specialists.
The possibilities for your application:
Rod-Ø from 10 - 140 mm,
clamping forces from
1 - 450 kN. Other
dimensions on request.
Other products of the range of services:
- Hydraulic cylinders
- Test cylinders
- Complete system solutions (Ratio-Drive®)
- Pressure intensifiers
- Industrial shock absorbers
- Special cylinders of all kinds
- Mounting parts/assembly utilities/accessories
|
|
Small and efficient!
Miniature Manual Clamping miniHK.
The miniHK series is a manually operated clamping element.
By tightening the clamping screw, the contact sections are pressed synchronously against the free surfaces of the section rail guide.
The floating contact sections guarantee symmetric power transmission.
|
|
A1 5C Collet index fixture.
Universal indexer with 24 space ring, 5C Collet taper in spindle nose.
Takes 4" chuck, 3 jaw, (not included) #1034 chuck.
Head can be angled from 0 deg. to 100+ deg.
Indexes quickly and easily, spindle locks in positive position.
Can be dismantled in seconds for easy cleaning. Changing index rings gives numerous combinations of divisions.
Spindle locks with index pin and/or horseshoe rings at rear of spindle.
For drill presses, milling machines, grinders and layout work.
22 lbs. Made in USA !!!
Model: A1
Options: AT tailstock. # AT
3 jaw chuck, # 1034
Blank index ring # AR-O
20 space index ring # AR20
36 space index ring # AR36
Other products available:
|
|
simple manual operation
1.00 and 2.00 inch capacity
Fixed collet position
horizontal or vertical mounting
2 to 32 index positions (1.00 Fixture)
2 to 32 index positions (2.00 Fixture)
coollant Flush
Accuracy to within .001 of true position
Easy part loading
Steel and Cast Iron construction
|
|
|
|
|
|
Bluid-in Zeropoint Quickclamping cylinder K5, round
Screw-in version
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter Ø 39 mm
Pull in force 5 kN (hydraulic)
Pull in force 1,5 kN (pneumatic)
Holding force 13 kN
Use:
With a small footprint for installation in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. Also suitable for use as „cylinder locks“ with high repeatability.
Note:
Installation Zeropoint Quickclamping cylinder with a low installation height of 19.8 mm and an installation diameter of 45 mm (M45 x 1). Hydraulic pressure is only needed for unclamping (min. 40 bar / max. 50 bar). The installation Zeropoint Quickclamping cylinder is mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The contact surface is the upper surface of the housing.
On request:
- Installation diagrams on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
|
|
Bluid-up Zeropoint Quickclamping cylinder K5, round
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Global diameter Ø 62 mm
Pull in force 5 kN (hydraulic)
Pull in force 1,5 kN (pneumatic)
Holding force 13 kN
Use:
For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations.
Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The contact surface is the upper surface of the housing.
On request:
- Individual housing can be supplied on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
|
|
PClamp clamps and brakes rod loads safely amd quickly. It can be adapted to standard systems such as pneumatic cylinders from leading manufactures (e.g. SMC, Festo= or to individual solutions. Rotatory clamping can also be achieved with PClamp. Certified systems from Employer's Liability Insurance Association can be realised.
Area of application:
Linear rails and guide ways
Clamping of linear axis
Swivel tables
Rotary tables
Spindles, feeders
Rod, piston, spindle clamping
Elevating devices
Hydraulic presses
Hydraulic lifts and elevating tables
Safety catches
Blocking systems
High-lifting devices
|
|
|
Safety Locks similar to Safety Catchers and Safety Brakes are used against failure of lifting members. But in contrast to those they are not suitable to decelerate masses or to dissipate kinetic energy. On the other hand, the rod displacement to build up the holding force is very small, so that this units can be used for a approximitive positioning tasks as well. Furthermore this design principle allows compact solutions even for small rod sizes (smaller than for Safety Catchers). In the field of pneumatic clamping devices the Safety Locks are providing the absolutely highest holding forces in relation to housing dimensions.
|
|
Active without pressure – incredible holding force
The pneumatic Clamping and Braking Element for piston rods RB.
The RB series is based on our proven wedge slide gear principle and is used for clamping and braking without pressure.
This element was developed for deployment on round-shaft guides or piston rods with a surface hardness of min. HCR 54.
The compact design is suitable for shaft diameters of Ø10 to Ø60 and allows holding forces of up to 60,000 N at a pneumatic opening pressure of just 4 bar.
As a specific feature no reset is needed for restarting.
The RB series stands out for its short reaction times. Even in vertical deployment, short braking distance are achieved in less than 30 ms
|
|
|
|
|
|
Bluid-in Zeropoint Quickclamping cylinder K10, K20, K40, round
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter: K10: Ø50mm, K20: Ø78mm K40: Ø102mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force 30 kN (pneumatic)
Max. holding force 105 kN
Use:
With a small foot-print for installation in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets.
Note:
The installation Zeropoint Quickclamping cylinders have high holding and pull-in forces with very small installation dimensions. Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage.
On request:
- Installation diagrams on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
- Also available as an individual flange version
|
|
Bluid-up Zeropoint Quickclamping cylinder K10, K20, K40, round
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Global diameter: K10: Ø78mm, K20: Ø112mm K40: Ø148mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force30 kN (pneumatic)
Max. holding force 105 kN
Use:
For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations in connection with clamping flange no. 6370ZB.
Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The modules are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The hydraulic version has 1 connection for clamping / unclamping (G1/4 or G1/8).
On request:
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
- Can also be supplied with centering pins for quicker and more precise installation
|
|
|
|
|
|
Bluid-in Zeropoint Quickclamping cylinder K10, K20, K40, square
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter: K10: Ø50mm, K20: Ø78mm K40: Ø102mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force 30 kN (pneumatic)
Max. holding force 105 kN
Use:
Can be used as a single clamping point or combined with round installation Zeropoint Quickclamping cylinders in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. A square Zeropoint Quickclamping cylinder prevents the pallet from twisting. The indexing function enables positioning every 90°. Specially suitable for use in turning.
Note:
The installation Zeropoint Quickclamping cylinders have high holding and pull-in forces with very small installation dimensions. Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. Square pallet for screwing onto the pallet see item no. 6370ZA.
On request:
- Installation diagrams on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
|
|
|
|