|
|
A1 5C Collet index fixture.
Universal indexer with 24 space ring, 5C Collet taper in spindle nose.
Takes 4" chuck, 3 jaw, (not included) #1034 chuck.
Head can be angled from 0 deg. to 100+ deg.
Indexes quickly and easily, spindle locks in positive position.
Can be dismantled in seconds for easy cleaning. Changing index rings gives numerous combinations of divisions.
Spindle locks with index pin and/or horseshoe rings at rear of spindle.
For drill presses, milling machines, grinders and layout work.
22 lbs. Made in USA !!!
Model: A1
Options: AT tailstock. # AT
3 jaw chuck, # 1034
Blank index ring # AR-O
20 space index ring # AR20
36 space index ring # AR36
Other products available:
|
|
simple manual operation
1.00 and 2.00 inch capacity
Fixed collet position
horizontal or vertical mounting
2 to 32 index positions (1.00 Fixture)
2 to 32 index positions (2.00 Fixture)
coollant Flush
Accuracy to within .001 of true position
Easy part loading
Steel and Cast Iron construction
|
|
PClamp clamps and brakes rod loads safely amd quickly. It can be adapted to standard systems such as pneumatic cylinders from leading manufactures (e.g. SMC, Festo= or to individual solutions. Rotatory clamping can also be achieved with PClamp. Certified systems from Employer's Liability Insurance Association can be realised.
Area of application:
Linear rails and guide ways
Clamping of linear axis
Swivel tables
Rotary tables
Spindles, feeders
Rod, piston, spindle clamping
Elevating devices
Hydraulic presses
Hydraulic lifts and elevating tables
Safety catches
Blocking systems
High-lifting devices
|
|
|
Safety Locks similar to Safety Catchers and Safety Brakes are used against failure of lifting members. But in contrast to those they are not suitable to decelerate masses or to dissipate kinetic energy. On the other hand, the rod displacement to build up the holding force is very small, so that this units can be used for a approximitive positioning tasks as well. Furthermore this design principle allows compact solutions even for small rod sizes (smaller than for Safety Catchers). In the field of pneumatic clamping devices the Safety Locks are providing the absolutely highest holding forces in relation to housing dimensions.
|
|
Active without pressure – incredible holding force
The pneumatic Clamping and Braking Element for piston rods RB.
The RB series is based on our proven wedge slide gear principle and is used for clamping and braking without pressure.
This element was developed for deployment on round-shaft guides or piston rods with a surface hardness of min. HCR 54.
The compact design is suitable for shaft diameters of Ø10 to Ø60 and allows holding forces of up to 60,000 N at a pneumatic opening pressure of just 4 bar.
As a specific feature no reset is needed for restarting.
The RB series stands out for its short reaction times. Even in vertical deployment, short braking distance are achieved in less than 30 ms
|
|
Clamping systems for measure machines as building set
The component fixing is especially critical in the measure technique. You must guarantee that the component is fixed on a measure machine without any bracing. Otherwise the measure results would be adulterated and this may have serious consequences.
The flexibility of the clamping systems is also very important. A remodelling must be fast and uncomplicated. This is an ideal territory for the clamping system “Spannfix” from THOME PRÄZISION.
A wide modular system affords the fast prepare and accommodate of devices. All parts are produced with high-class and hard anodised aluminium. In addition to a saving of time can be reached a saving of costs because of measure results and flexibility of the system.
Flexible, tough and easy. Our clamping system also solves your clamp jobs fast and faithful.
|
|
SPEEDY classic - mechanically / hydraulically
- Our most complete and versatile system
- available in 4 sizes with draw in forces from 5.3 to 30 kN
- Draw in- positioning - clamping - releasing- retraction, all these functions are integrated in a single element
- best suited for full automatic solutions
- decades have proven the wide range of applicability of this zero point mounting system
|
|
Mounting a Bock MonoQuad unit to your rotary table gives you many of the
advantages of a horizontal machining center on your VMC.
- Machine three sides of a part in one clamping
- Utilize your rotary table as a multi-station fixture for vertical machining centers.
- Reduces part handling and setups
- Reduces machining costs
- Indexer system can be built for any rotary table or indexer
- Holds 4 or 8 parts utilizing standard soft jaws.
|
|
The safety clamping unit "System RINGSPANN" clamps piston rods of hydraulic or pneumatic cylinders independent of the direction of movement. It clamps with disc spring force and is released by hydraulic or pneumatic pressure.
The units are fitted to cylinders ond other machine parts with a connecting flange.
Applications:
Securing presses during tool changing
Positioning of winch installations and rollers
Securing of hydraulic/pneumatic adjustments
Securing of elevating platforms
Securing of working cylinders, even under water
|
|
|
The duogrip is a dual clamp with a third-hand function. Without the need for time-consuming change-overs it can be changed into a simple- or a multiple clamping unit while with a conversion kit it can be changed into a centralising vice. It is very suitable for the manufacture of families of parts because the short conversion operations enormously reduce the non-productive machine time.
|
|
|
|
|
|
Horizontal Zeropoint Quickclamping cylinder with piston-catching
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Size: K20, K40
Explanation:
With our new Zeropoint Quickclamping cylinder with piston-catching, we make the palletizing asier and quicker.
• No search of drilling
• No damage of zero point drilling and nipples
• No risk of injury
Releasing and taking out of the pallet, take place still faster and simpler, because of the linking with the crane which is not more necessary during the release phase
Thanks to the speed of pelletizing, you reduce considerably your pelletizing period and consequently your costs.
Advantages:
• With and without blow out
• Completely in stainless steel
• Applicable in all positions without fit-up aids
• When the mechanism is out of service, the piston-catching stay out, it can be locked, thus the discs spring are not forced.
Can be integrated in:
• Clamping towers
• Clamping angles
• Automatized handling devices
• General mechanical
Note:
As standard, there is a manual or hydraulic advance motion of the piston-catching.
On request:
- Installation diagrams on request
|
|
Extreme light clamping tower for horizontal manufacturing center
Realizable with all Zeropoint Quickclamping cylinders
Hydraulic release or pneumatic release
Note:
• Lightweight construction structure
• Vibration resisting concept
• Up to 60% weight saving
• No stability losing compared to a traditional construction structure.
• Realizable with all Zeropoint Quickclamping cylinders
• Possibility to integrate Zeropoint Quickclamping cylinders for automatised solutions
Remark:
Zeropoint Quickclamping cylinder angle or cube realisable
|
|
|
|
|
|
Bluid-in Zeropoint Quickclamping cylinder K5, round
Screw-in version
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter Ø 39 mm
Pull in force 5 kN (hydraulic)
Pull in force 1,5 kN (pneumatic)
Holding force 13 kN
Use:
With a small footprint for installation in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. Also suitable for use as „cylinder locks“ with high repeatability.
Note:
Installation Zeropoint Quickclamping cylinder with a low installation height of 19.8 mm and an installation diameter of 45 mm (M45 x 1). Hydraulic pressure is only needed for unclamping (min. 40 bar / max. 50 bar). The installation Zeropoint Quickclamping cylinder is mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The contact surface is the upper surface of the housing.
On request:
- Installation diagrams on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
|
|
Bluid-up Zeropoint Quickclamping cylinder K5, round
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Global diameter Ø 62 mm
Pull in force 5 kN (hydraulic)
Pull in force 1,5 kN (pneumatic)
Holding force 13 kN
Use:
For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations.
Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The contact surface is the upper surface of the housing.
On request:
- Individual housing can be supplied on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
|
|
|
|
|
|
The Multiflex series vises are a total new concept of modular clamping system able to maximize the machine table capacity and increase its productivity (reduced dead times).
This system is designated for clamping several workpieces at the same time on the machine tool table, thus reducing tool changeover times.
This modular system makes a wide variety of clamping arrangements possible, wheter for several workpieces (equal or different) or for custom application. The base could in fact be clamped to the machine table while the jaws positioning, number or type could vary according to workholding needs (from 1 to 9 pcs. clamping possibility on the same vise base, see page 6-26).
1. Made of high alloyed quality steel, hardness 60±2 HRC - No wear
2. Highest precision accuracy: ground rack teeth on both the base and the jaws (ground teeth even between the fixed and movable jaws)
3. Minimum of set up times: quick and flexible jaws positioning
4. Possibility of vises matching and jaws alignement on whatever position on the vise base
5. Unlimited clamping range and combination (step jaws, prismatic, soft)
6. Guided Pull Down jaw Action thanks to the ground comb-teeth jaws
7. Possibility of vertical set up through Tombstones or Solid Vise Cube
|
|
multigrip – Multiple clamping with the multigrip system
Innovative Clamping System simply different.
• Vertical index-dovetailing with protection against damage
• Smooth work-piece support
• Simple maintenance
• Highest processing safety
Applications
• Multiple clamping
• Single piece clamping of large parts
• Clamping of large plates
• Package clamping
• Mirrored clamping
Minimise the setting-up time
Optimal use of the machine capacity due to multi-clamping with a new type of jaw positioning.
Security during high feed rates
Safe work-piece clamping with the stable block vice and its ideal force transfer and efficient press-down effect.
|
|
|
|
|
|
Bluid-in Zeropoint Quickclamping cylinder K10, K20, K40, round
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter: K10: Ø50mm, K20: Ø78mm K40: Ø102mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force 30 kN (pneumatic)
Max. holding force 105 kN
Use:
With a small foot-print for installation in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets.
Note:
The installation Zeropoint Quickclamping cylinders have high holding and pull-in forces with very small installation dimensions. Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage.
On request:
- Installation diagrams on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
- Also available as an individual flange version
|
|
Bluid-up Zeropoint Quickclamping cylinder K10, K20, K40, round
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Global diameter: K10: Ø78mm, K20: Ø112mm K40: Ø148mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force30 kN (pneumatic)
Max. holding force 105 kN
Use:
For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations in connection with clamping flange no. 6370ZB.
Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The modules are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The hydraulic version has 1 connection for clamping / unclamping (G1/4 or G1/8).
On request:
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
- Can also be supplied with centering pins for quicker and more precise installation
|
|
|
|
|
|
Bluid-in Zeropoint Quickclamping cylinder K10, K20, K40, square
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter: K10: Ø50mm, K20: Ø78mm K40: Ø102mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force 30 kN (pneumatic)
Max. holding force 105 kN
Use:
Can be used as a single clamping point or combined with round installation Zeropoint Quickclamping cylinders in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. A square Zeropoint Quickclamping cylinder prevents the pallet from twisting. The indexing function enables positioning every 90°. Specially suitable for use in turning.
Note:
The installation Zeropoint Quickclamping cylinders have high holding and pull-in forces with very small installation dimensions. Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. Square pallet for screwing onto the pallet see item no. 6370ZA.
On request:
- Installation diagrams on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
|
|
|
|
|
|
Bluid-up Zeropoint Quickclamping cylinder K10, K20, K40, square
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Size: 85x85mm, 120x120mm, 150x150 mm
Pull in force 40 kN (hydraulic)
Pull in force 30 kN (pneumatic)
Holding force 105 kN
Use:
Can be used as a single clamping point or combined with round surface-mounted Zeropoint Quickclamping cylinders in machine tables, clamping profiles, columns and towers, measuring machines, assembly stations in connection with clamping flanges no. 6370ZB). Clamping flange size 20 for K10, size 40 for K20, for K40 integrated onto the housing.
Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The ad-vantages of this are that there are no cumbersome lines and no danger of leakage. The hydraulic version has 1 connection for clamping / unclamping (G1/4 or G1/8). Square pallet for screwing onto the pallet see item no. 6370ZS.
On request:
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
- Can also be supplied with centering pins for quicker and more precise installation
|
|
Zeropoint Quickclamping compact cylinder
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Size: K10, K20
Use:
For retrofitting to modular profiles, columns, tombstones and cubes. Can be used with thin wall sections..
Note:
There are 5 standard connection options. 4 connections are installed laterally on the outside surface at a 90° angle. Connection is also possible in the base of the Zeropoint Quickclamping compact cylinder.
On request:
- Installation diagrams on request
- Automation solutions such as blowing out, blowing off, isolated applications, sealing air and media ducts
- Individual solutions, such as nipple and installation compatible or installation compatible for existing systems
|
|
Zeropoint Quickclamping cylinders with pusher and central locking against pollution for automatised solutions
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter Ø 78 mm
Pull in force 20 kN
Holding force 55 kN
Use:
For installation in base plates, machine tables, clamping profiles, columns and towers, machine pallets and clamping pallets.
Note:
Through the central locking the pollution particles can not go into the nipple bore. The central locking element advances with an individually defined spring force
Blowing out and sputter functions
On request:
- Installation diagrams on request
- Hydraulic move-out of central locking
|
|
|
|
|
|
Zeropoint Quickclamping cylinder with release and contact controls for automatised solutions
3 possibilities of monitoring:
- Pneumatic monitoring:
Function of blowing out by compressed air for the cleanliness of support surfaces. After the installation of the pallet of workpieces, it occurs in the pressure line a dynamic pressure, of which this one could be detected by the mean of a pressure sensor.
- Electric monitoring:
Direct position monitoring of the clamping piston in the Zeropoint Quickclamping cylinder by the mean of an inductive sensor. Electric signal when the Zeropoint Quickclamping cylinder is clamped. Small height necessary for the assembling like for the Zeropoint Quickclamping cylinders K5 (19,8 mm) and K40 (42 mm).
- Hydraulic monitoring:
Monitoring of the clamping piston by a hydraulic closure valve. Dynamic pressure when the Zeropoint Quickclamping cylinder is opened, which can be detected by mean of a pressure sensor. Free hydr. flow when the Zeropoint Quickclamping cylinder is closed. Despite a hydraulic sensor, only small height for assembling is necessary.
|
|
Size: K20 ITH6
Zeropoint Quickclamping cylinders with turbine for automatised solutions with:
• Turbine function for complete cleaning of support surfaces without „shady side“
• Central locking against pollution particles
• Hydraulic or pneumatic locking sensors
• Control of contact by air blocked
• Hydraulic pre-expulsion for palletizing solutions with also possibility to swing completely free during the catchment
• No damage of media-coupling
|
|
Zeropoint Quickclamping extrusion cylinder for applications by:
• Round tables and 5 axes milling machines, turning machines
• Better level holding
• Large support surface
• Free passage for flange piece, tubes, forks ...
|
|
The series EUROPA 99 is a composable high precision vice with varieted utilisations; can be used as you like with infinite blocking solutions:
- type E.D.M.A. 99 - autocentred self-locking doubled vice
- type E.M.A. 99 - autocentred locking vice
- type E.M.S. 99 - vice with draught or thrust blocking.
On the mobile and fixed parts there is a position guide for eventualy assembling of special jaws. This range can be used on level ground or on side. Entirely buildt in chromium nickel steel, hardened in 58 HRC and rectified with centesimal tolerance, to secure unlimited duration.
|
|
The combination of Bock Workholding's Twin Vises and Locator Plates is the most flexible and fastest workholding system available for your VMC.
Setup and repeat your setups in just minutes with Bock's super-fast quick change jaw system. Use hard jaws hold stock parts, use machinable jaws to hold castings, forgings, extrusions and other irregular shapes.
All Bock Twin Vise Systems offer:
- Quick-change hard jaws or machinable jaws
- Holds two smaller parts or one large one
- High-strength and light-weight
- Adjustable center jaw
- Hardened & ground steel guideways
- Chip flow-through cut-outs
- Interlocking or straight base design
- Fully sealed leadscrew assembly
- Bolts directly to Bock Locator Plates using DEXLOC Double Expanding Locator Pins.
|
|
|
Our modular Multiple Clamping System is used for multi task operations and for different work holding applications. It is used for high performance work holding on horizontal, vertical or 5 axis machine tools, in combination with machine tables, base plates, cubes, rotary tables or dividing heads.
|
|
From small to large
For every size of pallet there is a “recommended” maximum workpiece size.
However, this should only be regarded as a guide, since the size of the workpiece relative to the pallet depends above all on the material and the type of machining.
|
|
CIVI 2000 is a new interesting modular Multi-Clamping system that reduces
downtime and maximizes machine tool productivity
Complete base set with:
1 base (length optional), 1 fixed support, 1 pair of positioning keys, 1 t-wrench
|
|
|
|
