|
|
Mink round brushes - Highly efficient tools with countless applications
Mink round brushes can be applied to solve problems in a wide range of areas, and our engineers have the ideas to exploit this potential. When it comes to flexibility, no industrial tool can match these brushes. We offer a huge selection of models: roller brushes (with stub shafts), round brushes (with hollow centre spindle, no shaft), the Mink HP-System (two half segments, without shaft) and the Mink Zick-Zack-System (modules, with or without shaft). Finally, there are Mink web spreader brush rolls for modern processing of plastic film, textiles and many other kinds of web.
Advantages:
• Suitable for goods of all kinds
• Versatile and economical
• Maximum cleaning power combined with optimum surface care
• Form and stiffness according to individual requirements
• Less need for cleaning agents thanks to the mechanical action of the bristles – economic and ecological benefits
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
The Chevron secondary belt cleaner uses the speed and force of the belt rolling over our patented rubber disks. The unique rotary fingers are forced against the base of the chevrons to dislodge material from the belt.
- Sweeping Action - of each disk cleans in front of and behind each and every chevron.
- Easy Maintenance - no motors, air nozzles, or other problematic equipment to maintain.
- Works Great - in the pulp and paper, fertilizer, potash, and other bulk material industries where chevron style belts are heavily used.
- Solid or Notched - 8” (200mm) diameter abrasion resistant rubber disks are available depending on the height of the chevrons and the conveyor belt speed.
|
|
|
Flexco Chevron Belt Cleaner takes a new approach to cleaning chevron, cleated, and raised rib belts. Hundreds of rubber fingers create a rotary cleaning action that easily flicks carryback off the belt. And without the typical clogging and rapid wear problems associated with brush-type cleaners. Now there is a better solution for wet sand belts, wood chip belts and other raised top or grooved belts.
|
|
|
The modular principle underlying our one-way system of trapezoidal toothed roller brushes provides for fast, low cost changes of brushes. They can be installed and similarly removed by a simple hand operation. The teeth lock securely (and in a non-twist manner); as a result, a gap-free bristle surface is assured. Precise true running is guaranteed at all times. The DT system consists of brush segments which are mounted to the brush core with two locking collars. Due to the special modular principle on which they are based, worn individual segments on a roller brush can be replaced
|
|
|
Our brushing machine type BM 1138 has been constructed previously for heavy-duty conveyor belt cleaning in coal mines and foundries. Today we supply it for almost all kinds of industry where conveyor belts have to be cleaned.
|
|
|
|
|
|
MARTIN® Brush Belt Cleaners are specially suited for the removal of fines and residue from ribbed, flighted, grooved, or chevron belts. Versions are available to suit your conditions and your budget.
Motor-Driven Cleaning Action
One or two-horsepower motor (depending on belt width) turns brush against belt motion.
Match Cleaner To Requirements
Specify the cleaning system to suit your conditions and your budget.
MARTIN® Standard Brush Cleaner
MARTIN® Standard (Spiral) Brush Cleaner is value-priced answer to belt cleaning problems.
MARTIN® Strip Brush Cleaner
Uses 12 brush strips to form cleaner that sheds even moist material that would plug other brushes.
Brushes To Fit Need
MARTIN® Standard (Spiral) Brush Cleaner uses 0.38 inch (0.96 mm) polypropylene bristles wrapped in spiral around the hub. MARTIN® Strip Brush Cleaner forms brush from strips with 0.40 inch (1 mm) polypropylene bristles. Other materials and bristle diameters are available.
Martin Engineering is the world’s leading developer and manufacturer of engineered conveyor belt cleaning systems. In this position, Martin Engineering has developed fundamental principles of cleaner design that have set standards for belt cleaner engineering and performance.
The multiple-cleaner system originally adopted by Martin Engineering is now the standard for applications on belt conveyors carrying all types of bulk materials around the world. End users (and other cleaner manufacturers) have accepted it almost universally.
|
|
| ... products without technical information |
| |
Flow Monitoring
Blue-White manufactures electronic BW DIGI-METER digital flow meters, flow sensors, and flow monitoring equipment; as well as MICRO-FLO Flow Verification Systems.
BW DIGI-METER variations include Rate and Totalizer meters; 4-20mA / 0-10 VDC analog output flow rate and totalizers; Batch Process Controllers; and Hall Output Signal. Both battery and AC powered versions are offered. Many material, calibration and mounting styles are available.
MICRO-FLO variations include: Sensor Only and Panel Mount Display. Units can be mounted to Blue-White metering pumps to verify chemical injection has occurred. Flow units include: Gallons; Liters; Ounces, Milliliters. Time units include: Minutes; Hours; Days.
|
|
Rototron RRI
The sensor consists of a rotor vane that is rotated by the spped of the flowing medium. The speed of rotation is proportional to the volume flow per unit time. The rotation of the rotor is detektiert by a inductive sensor.
no magnet parts
large wear liberty by high-quality ceramic axle and ceramic bearings
output circuit PNP, NPN or Namur
no straight line in-out necessary
easy measurement of flow rates
inherently safe properties
modular construction with the most versatile connection systems
connections can be plugged and rotated
|
|
|
The rotating movement of the impeller is transferred by a modulator disc to the sensor system of the FLYPPER electronic counter module.
|
|
● Connecting size: 3/8", 1/2", 3/4", 1" NPT female standard
● Power Supply: 3.8V to 30VDC
● Output: Sink (NPN)
● Material: Body-Polypropylene; Cover-Acrylic,PP,PTFE available; Rotor-PVDF; Shaft-Ceramic; Bearings-Ceramic
● O-ring: Viton
● Max. Temperature: 70ºC
● Max. Pressure: 10kg/cm²
● Accuracy: ±2% F.S
|
|
|
|
|
|
M2517 / F0110 Insertion Paddlewheel Flow Sensor & Rate Indicator & Totalizer
The Model 2517 Insertion Paddlewheel Flow Sensor provides a reliable and economical means of monitoring flow. One size sensor is field adjustable for use in 1.5" to 24" diameter pipes.
The Model F0110 Battery Powered Indicator simultaneously displays both Rate and Total on a large alphanumeric LCD display. Easy set-up is accomplished via the front panel three-position keypad.
TYPICAL APPLICATIONS
• Potable Water
• Cooling Water
• Irrigation Systems
• HVAC
• Condensate
• Pump Protection
• Boiler Feed Water
• Groundwater
FLOW SENSOR SPECIFICATIONS
* Power: None (self generated)
* Output: Coil
* Pipe Size Range: 1.5" to 24"
* Velocity Range: 1 to 30 fps
* Flow Range: (see chart below)
* Accuracy: +- 2% of full scale
* Repeatability: +- 0.5% of full scale
* Temperature Range: 200° F maximum
* Pressure: 250 PSI maximum @ 70° F
* Process Connection: 1.5" MNPT
* Conduit Connection: 0.5” FNPT
* Weight: 2.5 Lbs.
* Cable: 2-conductor shielded twisted pair, 22 AWG, 25’ standard, 200’ max.
|
|
Paddlewheel flow meters for pipe sizes 1/2-8 inches
-High-quality ruby bearings for excellent low-flow performance and long life
-One easily-replaced moving part
-Pickup exerts no magnetic drag on the rotor
-Square-wave frequency output can connect directly to PLC’s or counter controls
-Indicator or transmitter can be mounted on the flowmeter or remote
|
|
MW-100
Mini-Wheel Flowmeter with In-line flow
Water Calibration Range: 0.5 – 20 L/min
Body Material: 316SS
Port Sizes: 1/4", 3/8" FNPT
M-10001
Low Flow Paddlewheel Flowmeter
Water Calibration Range: 0.022 – 0.30 L/min
Body Materials: Aluminum, PTFE
Port Size: 1/4" FNPT
M-10000
M-10000 series Paddle Wheel Flow Meters belong to high accuracy Tangential type turbine meters with wide range ability and high accuracy. These could be with visual indication or remote monitoring. These are more accurate than ever before and are available in different types of materials and sizes for specific applications.
Port Sizes: 1/8" to 1"
Flow Ranges: 0.1 LPM to 250 LPM
Materials: PTFE, 316SS, Celcon, Brass
|
|
measuring tube inside diameter:
9.7 mm; 18.2 mm; 25 mm; 32 mm; 40 mm; 50 mm ...
alternative forms of connection depending on inside diameter of measuring tube:
tube fittings; cutting ring fittings; flange connection;
flat tube ends; internal screw thread for connecting nipples
alternatively with / without input / output section
alternatively with / without integrated transducer
initial smallest measurable flow rate dependent on type of vane wheel:
in gases from 0.08 m³/h,
in liquids 0.007 m³/h
terminal flow rate dependent on type of vane wheel:
in gases 20 m/s; 40 m/s; 80 m/s;120 m/s;
in liquids: 3 m/s; 7.5 m/s; 10 m/s
working temperature range:
-20° C... 100 °C; -20 °C... 240 °C (higher on demand)
maximum working pressure:
up to 10 bar above atmospheric (higher on demand)
materials:
stainless steel; aluminium ...
explosion-proof type of protection:
Category 1G, 1D (Zone 0, Zone 20); Category 2G, 2D (Zone 1, Zone 21)
special designs on request
|
|
|
|
|
|
initial smallest measurable flow rate dependent on type of vane wheel:
in gases 0.2...1.6 m/s; in liquids 0.01...0.1 m/s
terminal flow rate dependent on type of vane wheel:
in gases 3 m/s; 20 m/s; 40 m/s; 80 m/s;120 m/s;
in liquids: 3 m/s; 7.5 m/s; 10 m/s; condition: no cavitation
probe diameter:
16 mm; 25 mm; 25/27 mm and 30 mm
working temperature range:
up to 100° C; 260 °C; 370 °C; 450 °C and 500 °C
maximum working pressure:
up to 10 bar overpressure (higher on demand)
explosion-proof type of protection:
Category 1G, 1D (Zone 0, Zone 20); Category 2G, 2D (Zone 1, Zone 21)
probe tube material:
aluminium, stainless steel, titanium
optional incl. direction indication
optional incl. integr. temperature measurement
special designs on request
====================================================
Compact units for use in Ex-applications:
for gas: Ex II 1/2 G Ex d e [ia] IIC T6 and
for dust: Ex II 1/2 D Ex iaD20/tDA21 IP6x TX
sensor for use in category 1 (Ex-zone 0 rsp. 20)
transducer housing for use in category 2 (Ex-zone 1 rsp. 21)
probe with diameter 25 mm in different lengths between 250 mm and 650 mm
initial smallest measurable flow rate:
in gases 0.3 m/s; in liquids 0.03 m/s
terminal flow rate:
in gases 20 m/s; 40 m/s; 80 m/s; 120 m/s
in liquids: 7,5 m/s; 10 m/s;
condition: no cavitation
working temperature range:
up to 100 °C; 260 °C; 370 °C und 500 °C
|
|
|
|
|
|
Litre Meter developed the Pelton wheel principle as the best to achieve accurate measurements of low flows.
A single turbine ring size is common to all Litre Meter flowmeters. The turbine rotor is based on a highly efficient 'Pelton Wheel' design. It is available in various chemically resistant materials such as PFA (Teflon)and PVDF. The rotor ferrites are sealed to make them non-wetted parts. Sapphire bearings are offered for maximum chemical resistance as standard. These provide a very low friction mechanically-robust bearing with long life characteristics.
The rotation of the rotor is sensed by an electronic system using the interaction of ferrites in the rotor tips with a pickup coil. No drag is imposed on the rotor which assists in the measurement of extremely low flows. This, coupled with the efficient Pelton Wheel design and low friction bearings gives the meter major advantages. The complete turbine ring assembly can be easily removed with the meter remaining in line if cleaning is required.
|
|
Titan manufacture flowmeters based on the Pelton wheel technique. This well proven method is the ideal way of measuring low rates of flow of low viscosity liquids. Advantages are wide flow range, good linearity and repeatability, with a compact, low-cost design. The unit can be built totally from engineering plastics, with no metallic parts in contact with the fluid monitored.
The 800, 900 and 1000 series flowmeters can measure flows from 0.05L/min to 30 L/min, or are available as simple flow switches, to alarm on flow failure, low or high flow. End connections are typically BSPF threads or hose barbs, other connections can be supplied.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
