|
|
Mink round brushes - Highly efficient tools with countless applications
Mink round brushes can be applied to solve problems in a wide range of areas, and our engineers have the ideas to exploit this potential. When it comes to flexibility, no industrial tool can match these brushes. We offer a huge selection of models: roller brushes (with stub shafts), round brushes (with hollow centre spindle, no shaft), the Mink HP-System (two half segments, without shaft) and the Mink Zick-Zack-System (modules, with or without shaft). Finally, there are Mink web spreader brush rolls for modern processing of plastic film, textiles and many other kinds of web.
Advantages:
• Suitable for goods of all kinds
• Versatile and economical
• Maximum cleaning power combined with optimum surface care
• Form and stiffness according to individual requirements
• Less need for cleaning agents thanks to the mechanical action of the bristles – economic and ecological benefits
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
Mink Vee-belt brushes (BKR) – Moderate prices and prompt delivery
Mink Vee-belt brushes are resistant to dust, dirt, moisture, oil, grease and common chemicals. Moreover, they’re ideal for use in small spaces. They can be supplied in both open-ended and endless versions. And because we know that you never like to wait, we keep the most important types in stock. They’re inexpensive and can be delivered promptly.
Advantages:
• Practical solutions for immediate use
• Extremely rugged
• Working temperatures: -15°C to +80°C
• Belt speeds up to: 20 m/sec.
|
|
Circular Discs
These brushes are especially used for cleaning, polishing or deburring. Their applications are best suited to the treatment of metal, for the cleaning of large surfaces, as used in the construction industry. The body is made of either plastic, wood or metal. The filling material may be chosen according to the task requirements. The density of the filling material can be varied by the diameter and the distance of and from the hole.
|
|
Abrasive grit impregnated into the extruded nylon filament allows an abrasive nylon brush to perform deburring, edge blending, and surface finishing. These brushes are available in a variety of styles including wheel, cup, end, mandrel mounted, and cylinder.
Use the Abrasive Nylon when you have threaded bores, uneven O.D.'s or simply need a lighter finish.
|
|
Mink round brushes from stock (RUB) - Stock products for fast results
Whether you need small or large quantities, Mink can deliver round brushes to you from stock – quickly, inexpensively and in consistently high quality. In this way, you can get instant solutions to many problems that come up in day-to-day work. When special demands arise, we’ll be happy to make our full range of services available. Our engineers will provide individual advice, and we can make modifications to standard brushes or manufacture special products to fit your needs.
Advantages:
• Instant solutions to your problems
• Protection of surfaces against damage, reduced need for cleaning additives
• Gentle transfer of freshly painted products
• Hygienic application of icings, plus many other applications
|
|
|
They work in machines and are used for clearing, cleaning, insulating and discharging electric charges etc. Various body materials are possible: including wood, metal and plastic. The materials for the bristles can be from the finest horsehair to the firmest steel wire. The density of the filling material can be varied by the diameter and the distance of and from the hole.
|
|
|
Available in sizes as small as .024" diameters, these brushes are available in stainless steel, carbon steel, brass, nylon and abrasive nylon. These brushes are ideal for micro burr removal, internal cleaning, removal of small imperfections and surface preparation.
|
|
These brushes are varied for many different uses: not only for cleaning of tubes, gratings, sleeves and cylinders. Industrial batch fabrication requires individual adapted tools, what we offer with our Interior Brushes. The diameter of these brushes can be matched on 1/10 millimetre exact. Interior Brushes are available with a variety of different filling materials.
The micro-abrasive brushes on the left side are used for deburring cross drillings and cleaning heatings. Through our know-how and equipment we are able to offer attractive proposition for manufacturers of boilers.
|
|
The Chevron secondary belt cleaner uses the speed and force of the belt rolling over our patented rubber disks. The unique rotary fingers are forced against the base of the chevrons to dislodge material from the belt.
- Sweeping Action - of each disk cleans in front of and behind each and every chevron.
- Easy Maintenance - no motors, air nozzles, or other problematic equipment to maintain.
- Works Great - in the pulp and paper, fertilizer, potash, and other bulk material industries where chevron style belts are heavily used.
- Solid or Notched - 8” (200mm) diameter abrasion resistant rubber disks are available depending on the height of the chevrons and the conveyor belt speed.
|
|
|
Tube brushes are made in carbon steel, stainless steel, nylon, brass or natural filaments. Usually cut for power, they are ideal for cleaning applications to remove chips, oil, dirt, rust and corrosion from inside holes. The brushes are designed for both thru hole or closed hole applications and can have a ring handle or plastic handle added for hand applications.
|
|
|
These brushes are varied for many different uses: not only for cleaning of tubes, gratings, sleeves and cylinders. Interior brushes regulate current velocity in tubing systems. They are similar to the double spiral tube brushes for deburring cross drillings etc.
|
|
Short description:
These tools are designed for manual and automated finishing machinery used in extrusion, automotive, powdered metal, fineblanking and other industrial deburring applications. The smaller diameter brushes can be used on hand tools for the surface preparation of a variety of materials. Our stock brushes include diameters from 3" to 27". We also have the capability of providing customized products for a wide variety of applications.
|
|
Short description:
Our technical staff can design a brush that is matched to both your equipment mounting configuration(s) and your specific deburring applications. If you have a profile that s giving you headaches, we can design a built-to-profile brush using your wheel and a cross-section CAD drawing. A fitted brush requires less dressing-in and makes better contact for more efficient burr removal.
|
|
|
Flexco Chevron Belt Cleaner takes a new approach to cleaning chevron, cleated, and raised rib belts. Hundreds of rubber fingers create a rotary cleaning action that easily flicks carryback off the belt. And without the typical clogging and rapid wear problems associated with brush-type cleaners. Now there is a better solution for wet sand belts, wood chip belts and other raised top or grooved belts.
|
|
Key Features:
- Sturdy, self-centering system
- Flexible filaments are engineered to provide the correct pressure to create an ideal hone - bore after bore
- Rigid abrasive media is firmly attached to the end of the flexible filaments making the tool excellent for tough cross-hole deburring and edge radiusing applications
- Available for hole diameters ranging from 6.4mm to 203mm
- Grit choices are available in Silicon Carbide & Aluminum Oxide from 60 through 320
|
|
|
|
|
|
Model TBF abrasive brush
Abrasive brushes mounted on resin supports.
Ideal for clients looking for more aggressive, durable brushes.
The TBF system is designed to provide the brush with perfect harmony between durability and flexibility.
The studied diameter of our bundles, combined with the right inclinations and degradations provide our brush with perfect adaptability to the contour of the wheel rim, brushing its entire surface perfectly, including the corners of the hard-to-access windows.
Our TBF system is especially recommended for companies that have large production lines.
The brushes are supplied in different types of anchoring, depending on the needs of each client.
In addition, given the high quality of the filaments used, the brush is very long-lasting, avoiding unnecessary changes and stops in the machine.
Think no further, Kumex TBF brushes are the best choice for high quality production...
Available for wheel rims with the following diameters: 13" - 14" - 15" - 16" - 17" - 18" - 19" - 20" - 22"
Also produced in maximum density for the external part of the wheel rim.
|
|
|
Disc brushes are among KULLEN's most interesting products. They are used in industry as a rotating tool. Their quality is as reliable as the dependability of our choice of the right disc brush for your requirements. We guarantee this by manufacturing them on semi-automatic and automatic CNC machines. In addition to quality, we assure you of individual treatment - quality is inplicit and as you need we produce individual brushes for you. Disc brushes come in a wide variety of plastic, metal and wooden cores and bristle materials.
|
|
SIC and Diamond Abrasive Brushes for aging and burnishing of marble, granite, agglomerate, ceramics and stone in general.
Our vast range of products includes all market formats, and we are prepared to develop any of our clients’ demands.
At Kumex®, we offer the right balance between quality and price, supplying practically 80% of the European market.
We not only offer our clients a wide range of products, but also the possibility of developing exclusive products for very specific needs. To do so, we put at our clients’ disposal our extensive experience in the finishing industry and the cutting edge technology of our machinery.
Enabling us to manufacture our products, we have the market’s most advanced materials and cutting edge technology.
We can produce brushes with Diamond, SIC, Stainless Steel, Ceramic and our innovative Coex-R® filaments.
To know more about our filaments, diameters, geometries, percentages, etc., please consult our filaments section, in the products section.
|
|
|
Cubitron™ abrasive provides high cut while the flexible plastic brings superior cleaning to a wide variety of surface areas, without damaging the work piece. Eliminates flying wires common with traditional wire brushes.
|
|
Abrasive Brushes for Fineblanking
Model TBK brushes are frontal brushes prepared especially for planetary type deburring systems.
We have different models (TBK1-TBK2-TBK3-TBK4-TBK5, etc...), depending on the type of anchoring of the brush.
In turn, all models are produced with different diameters and distributions.
For greater precision all our supports are injection-moulded at the Kumex-Plastic-Systems® division of the Kumex® industrial group.
|
|
Kumex strip brushes - immediate problem-solving with stock items.
Kumex - Strip Brushes have proved to be versatile, multi-purpose industrial tools. Most importantly, however, users have found that their surprisingly good cost-effectiveness ratio has provided a consistently convincing argument in their favour.
Whether a brush is required to act as a flexible seal, wiper, guide or supporting surface, the multiplicity of possible body shapes and materials and the wide range of bristle materials available offer an almost inexhaustible variety of combinations for resolving problems in the optimum way.
|
|
|
Lath brushes are intelligent systems which make production stages more efficient. The slim, elegant brushes stand out by virtue of their wide-ranging capabilities and, today, have become an irreplaceable tool in countless industries. Their variety is almost unlimited. Their basic bodies consist principally of plastic materials in various grades but, needless to say, classic wooden and metal bodies are also available. The variety of brushes of this type multiplies by the variety of available bristles.
|
|
|
The modular principle underlying our one-way system of trapezoidal toothed roller brushes provides for fast, low cost changes of brushes. They can be installed and similarly removed by a simple hand operation. The teeth lock securely (and in a non-twist manner); as a result, a gap-free bristle surface is assured. Precise true running is guaranteed at all times. The DT system consists of brush segments which are mounted to the brush core with two locking collars. Due to the special modular principle on which they are based, worn individual segments on a roller brush can be replaced
|
|
|
Our brushing machine type BM 1138 has been constructed previously for heavy-duty conveyor belt cleaning in coal mines and foundries. Today we supply it for almost all kinds of industry where conveyor belts have to be cleaned.
|
|
|
|
|
|
MARTIN® Brush Belt Cleaners are specially suited for the removal of fines and residue from ribbed, flighted, grooved, or chevron belts. Versions are available to suit your conditions and your budget.
Motor-Driven Cleaning Action
One or two-horsepower motor (depending on belt width) turns brush against belt motion.
Match Cleaner To Requirements
Specify the cleaning system to suit your conditions and your budget.
MARTIN® Standard Brush Cleaner
MARTIN® Standard (Spiral) Brush Cleaner is value-priced answer to belt cleaning problems.
MARTIN® Strip Brush Cleaner
Uses 12 brush strips to form cleaner that sheds even moist material that would plug other brushes.
Brushes To Fit Need
MARTIN® Standard (Spiral) Brush Cleaner uses 0.38 inch (0.96 mm) polypropylene bristles wrapped in spiral around the hub. MARTIN® Strip Brush Cleaner forms brush from strips with 0.40 inch (1 mm) polypropylene bristles. Other materials and bristle diameters are available.
Martin Engineering is the world’s leading developer and manufacturer of engineered conveyor belt cleaning systems. In this position, Martin Engineering has developed fundamental principles of cleaner design that have set standards for belt cleaner engineering and performance.
The multiple-cleaner system originally adopted by Martin Engineering is now the standard for applications on belt conveyors carrying all types of bulk materials around the world. End users (and other cleaner manufacturers) have accepted it almost universally.
|
|
|
|
