|
|
The Chevron secondary belt cleaner uses the speed and force of the belt rolling over our patented rubber disks. The unique rotary fingers are forced against the base of the chevrons to dislodge material from the belt.
- Sweeping Action - of each disk cleans in front of and behind each and every chevron.
- Easy Maintenance - no motors, air nozzles, or other problematic equipment to maintain.
- Works Great - in the pulp and paper, fertilizer, potash, and other bulk material industries where chevron style belts are heavily used.
- Solid or Notched - 8” (200mm) diameter abrasion resistant rubber disks are available depending on the height of the chevrons and the conveyor belt speed.
|
|
|
Flexco Chevron Belt Cleaner takes a new approach to cleaning chevron, cleated, and raised rib belts. Hundreds of rubber fingers create a rotary cleaning action that easily flicks carryback off the belt. And without the typical clogging and rapid wear problems associated with brush-type cleaners. Now there is a better solution for wet sand belts, wood chip belts and other raised top or grooved belts.
|
|
|
Our brushing machine type BM 1138 has been constructed previously for heavy-duty conveyor belt cleaning in coal mines and foundries. Today we supply it for almost all kinds of industry where conveyor belts have to be cleaned.
|
|
|
|
|
|
MARTIN® Brush Belt Cleaners are specially suited for the removal of fines and residue from ribbed, flighted, grooved, or chevron belts. Versions are available to suit your conditions and your budget.
Motor-Driven Cleaning Action
One or two-horsepower motor (depending on belt width) turns brush against belt motion.
Match Cleaner To Requirements
Specify the cleaning system to suit your conditions and your budget.
MARTIN® Standard Brush Cleaner
MARTIN® Standard (Spiral) Brush Cleaner is value-priced answer to belt cleaning problems.
MARTIN® Strip Brush Cleaner
Uses 12 brush strips to form cleaner that sheds even moist material that would plug other brushes.
Brushes To Fit Need
MARTIN® Standard (Spiral) Brush Cleaner uses 0.38 inch (0.96 mm) polypropylene bristles wrapped in spiral around the hub. MARTIN® Strip Brush Cleaner forms brush from strips with 0.40 inch (1 mm) polypropylene bristles. Other materials and bristle diameters are available.
Martin Engineering is the world’s leading developer and manufacturer of engineered conveyor belt cleaning systems. In this position, Martin Engineering has developed fundamental principles of cleaner design that have set standards for belt cleaner engineering and performance.
The multiple-cleaner system originally adopted by Martin Engineering is now the standard for applications on belt conveyors carrying all types of bulk materials around the world. End users (and other cleaner manufacturers) have accepted it almost universally.
|
|
Mink round brushes - Highly efficient tools with countless applications
Mink round brushes can be applied to solve problems in a wide range of areas, and our engineers have the ideas to exploit this potential. When it comes to flexibility, no industrial tool can match these brushes. We offer a huge selection of models: roller brushes (with stub shafts), round brushes (with hollow centre spindle, no shaft), the Mink HP-System (two half segments, without shaft) and the Mink Zick-Zack-System (modules, with or without shaft). Finally, there are Mink web spreader brush rolls for modern processing of plastic film, textiles and many other kinds of web.
Advantages:
• Suitable for goods of all kinds
• Versatile and economical
• Maximum cleaning power combined with optimum surface care
• Form and stiffness according to individual requirements
• Less need for cleaning agents thanks to the mechanical action of the bristles – economic and ecological benefits
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
Mink Vee-belt brushes (BKR) – Moderate prices and prompt delivery
Mink Vee-belt brushes are resistant to dust, dirt, moisture, oil, grease and common chemicals. Moreover, they’re ideal for use in small spaces. They can be supplied in both open-ended and endless versions. And because we know that you never like to wait, we keep the most important types in stock. They’re inexpensive and can be delivered promptly.
Advantages:
• Practical solutions for immediate use
• Extremely rugged
• Working temperatures: -15°C to +80°C
• Belt speeds up to: 20 m/sec.
|
|
|
The modular principle underlying our one-way system of trapezoidal toothed roller brushes provides for fast, low cost changes of brushes. They can be installed and similarly removed by a simple hand operation. The teeth lock securely (and in a non-twist manner); as a result, a gap-free bristle surface is assured. Precise true running is guaranteed at all times. The DT system consists of brush segments which are mounted to the brush core with two locking collars. Due to the special modular principle on which they are based, worn individual segments on a roller brush can be replaced
|
|
Demag LRS travel wheel system:
The Demag LRS travel wheel system is a robust, universal travel wheel system for a wide range of applications. It is designed for travel applications with wheel loads up to 6.5 t (at 100 m/min) and travel speeds up to 240 m/min. It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system.
|
|
features:
Acetal races as standard
Polypropylene races also available
Stainless steel 420 balls as standard
Glass ball grades available
advantages:
Corrosion resistant
Lubrication free
Lightweight
Low friction
Quiet
Hygienic
Can be washed down
Maintenance free
In excess of 30 years proven performance
|
|
Available models:
- model 50 conveyor wheel, load rating 50#
- model 75 conveyor wheel, load rating 75#
- model 100 conveyor wheel, load rating 100#
- model 150 conveyor wheel, load rating 150#
|
|
| ... products without technical information |
| |
features:
Acetal races as standard
Polypropylene races also available
Stainless steel 420 balls as standard
Glass ball grades available
advantages:
Corrosion resistant
Lubrication free
Lightweight
Low friction
Quiet
Hygienic
Can be washed down
Maintenance free
In excess of 30 years proven performance
|
|
features:
Acetal races as standard
Polypropylene races also available
Stainless steel 420 balls as standard
Glass ball grades available
advantages:
Corrosion resistant
Lubrication free
Lightweight
Low friction
Quiet
Hygienic
Can be washed down
Maintenance free
In excess of 30 years proven performance
|
|
GenStar Conveyor Bearings
Greater load capacity, Higher Speed, Longer life, Quiet Running
- Load capacity of 450# per bearing
- Precision ABEC-1 core bearing
- Better fit to steel tubing
- Frantz Quality
- Plastic insert for quiet operation
- Static discharge material
- 1.9" OD for 16 gauge applications
|
|
Technical Data:
1 Working Width (mm) 50~1300
2 Working Thickness (mm) 5~70
3 Working Length (mm) ¡Ý500
4 Working Precision (mm) ¡À0.1
5 Motor of Abrasive Belt (KW) 37+30
6 Speed of Abrasive Belt (m/s) 20¡¢12
7 Abrasive Belt Size L¡ÁD (mm) 2620¡Á1330
8 Working Pressure (MPa) 0.4~0.7
9 Compressed Air Consumption (m3/min) 0.6
10 Feeding Speed (stepless speed variation ) (m/min) 6~20
11 Motor for Auto-feeding System (KW) 7.5
12 Elevator System for Work-table (KW) 1.5
|
|
The DM-CB can operate in and off line. Suitable for tight spaces, it guarantees demagnetization of a wide range of piece sizes. It consists of an electric cabinet and, separately, a conveyor belt with integrated coil and relative support.
Versatile: A modular device that can easily be incorporated in the line without further adaptation costs.
Compact: the size of the conveyor belt is reduced to the minimum.
Simple: it can be adapted to every industrial layout.
|
|
|
|
|
|
The model RDU3-A, is a fully automatic unit consisting of an electronic demagnetizing and handling unit with a conveyor belt. It has also a compressed air system for top coil height regulation and applying a load to the rings during demagnetization.
The RDU3-A has been created to demagnetize large bearing rings: Diameters 120 to 420; Height 20 to 200. The versatile working of this machine guarantees complete adaptability to a wide-range of applications.
Functioning sequence: The ring is loaded onto the conveyor belt, it is detected and measured, transported to the centre of the demagnetizing coils. At this stage, the conveyor belt stops, the coil descends pneumatically while a load is applied to the ring to be demagnetized. The coil rises and an enabling signal are given when a new ring is delivered. The conveyor belt starts again and the demagnetized ring is unloaded.
The performances guaranteed by Bussi demagnetizers®, include: Minimum residual magnetism, Complete reliability, High productivity, Easy Motion with no magnetic impediment, Minimum power consumption, easy Adaptability to client’s production lines and customisation to adapt Bussi technology to all demands – www.bussi.it
|
|
Conveyor Oven
We are experts in thermal process applications and Epcon is ready to design and assemble your custom Conveyor Oven. Our experienced engineers will ensure that your Conveyor Oven accommodates your needs.
Epcon's innovative and patented Industrial Oven designs are built to your unique specifications. Our superior workmanship is evident in all of our custom batch ovens, powder coating ovens, drying ovens, curing ovens.
|
|
| ... products without technical information |
| |
... see all the products in the category
Ovens
|
Mash Bearings
1 BEARINGS NUMBER EMAPOTK2T
2 EMAPOTK2TZZ
3 190905 EMAPOTK2F
4 626905 EMAPOTK2FZZ
5 120905 EMAPOTK35
6 190903 EMAPOTK3TZZ
7 626903 EMAPOTK3T
8 120903 EMAPOTK3TZZ
9 626903 55*17
10 XG55*12 58*17
11 XG55*16 55*20
12 XG79*19 57*20
13 GL155-82* 60*20
14 180704 66*20
15 XG125.5*26*36 35*8
16 XG135*25*38 44*12
17 XSJ-02-05 70 57*10
18 XMG83*20 60*15
19 NR458 66*12
20 MNR459 68*18
21 V1286-1 83*14
22 V1286-2RS-1 85*20
23 V1287-1 56*10
24 V1287-2RS-1 60*17
25 177383 57*11
26 183599 60*16
27 183615 A265H
28 177392 261.4.D18-ZZ
|
|
| ... products without technical information |
| |
Disc brakes are used on conveyors for four main reasons:
An emergency stop.
For normal stopping and parking.
Where one conveyor feeds another and there is risk of over spill.
Wherever there exists a risk of personal injury particularly under ground.
|
|
| ... products without technical information |
| |
Cooling tunnel
Green anodes are handled, by means of swing trays hanging from an overhead conveyor or carriers’ conveyor
Cooling by water sprinkling and ventilation
Inspection and control post of the anodes density at the entry of tunnel
Blowing stoppers post at the tunnel outlet.
Mud basin for decantation buried and covered, optimized and compacted including:
2 gravel chambers (one in operation, the other for cleaning)
1 sediment chamber of fines equipped with a reserve grid for the floating ones
1 pumping chamber
|
|
| ... products without technical information |
| |
Socony Oven Conveyer Lubricant is a high performance product designed specifically for the lubrication of oven conveyor chains at temperatures up to 200 degrees celsius. It is formulated from a low viscosity oil and colloidal graphite. The oil acts as a carrier for the graphite and can penetrate between the moving parts. The oil is sufficiently volatile at the working temperature to evaporate without leaving residues that might cause sticking.
Socony Oven Conveyor Lubricant is best applied at a low temperature point to allow the fluid to penetrate between the links and pins. As the conveyor moves into a hot zone the carrier evaporates, leaving a lubricating film of graphite. The lubricant may be applied manually by brush or some form of centralised mechanical system.
|
|
|
|
see the results for the following category : 
