|
|
Mink round brushes - Highly efficient tools with countless applications
Mink round brushes can be applied to solve problems in a wide range of areas, and our engineers have the ideas to exploit this potential. When it comes to flexibility, no industrial tool can match these brushes. We offer a huge selection of models: roller brushes (with stub shafts), round brushes (with hollow centre spindle, no shaft), the Mink HP-System (two half segments, without shaft) and the Mink Zick-Zack-System (modules, with or without shaft). Finally, there are Mink web spreader brush rolls for modern processing of plastic film, textiles and many other kinds of web.
Advantages:
• Suitable for goods of all kinds
• Versatile and economical
• Maximum cleaning power combined with optimum surface care
• Form and stiffness according to individual requirements
• Less need for cleaning agents thanks to the mechanical action of the bristles – economic and ecological benefits
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
Circular Discs
These brushes are especially used for cleaning, polishing or deburring. Their applications are best suited to the treatment of metal, for the cleaning of large surfaces, as used in the construction industry. The body is made of either plastic, wood or metal. The filling material may be chosen according to the task requirements. The density of the filling material can be varied by the diameter and the distance of and from the hole.
|
|
Abrasive grit impregnated into the extruded nylon filament allows an abrasive nylon brush to perform deburring, edge blending, and surface finishing. These brushes are available in a variety of styles including wheel, cup, end, mandrel mounted, and cylinder.
Use the Abrasive Nylon when you have threaded bores, uneven O.D.'s or simply need a lighter finish.
|
|
|
Available in sizes as small as .024" diameters, these brushes are available in stainless steel, carbon steel, brass, nylon and abrasive nylon. These brushes are ideal for micro burr removal, internal cleaning, removal of small imperfections and surface preparation.
|
|
These brushes are varied for many different uses: not only for cleaning of tubes, gratings, sleeves and cylinders. Industrial batch fabrication requires individual adapted tools, what we offer with our Interior Brushes. The diameter of these brushes can be matched on 1/10 millimetre exact. Interior Brushes are available with a variety of different filling materials.
The micro-abrasive brushes on the left side are used for deburring cross drillings and cleaning heatings. Through our know-how and equipment we are able to offer attractive proposition for manufacturers of boilers.
|
|
Short description:
These tools are designed for manual and automated finishing machinery used in extrusion, automotive, powdered metal, fineblanking and other industrial deburring applications. The smaller diameter brushes can be used on hand tools for the surface preparation of a variety of materials. Our stock brushes include diameters from 3" to 27". We also have the capability of providing customized products for a wide variety of applications.
|
|
Short description:
Our technical staff can design a brush that is matched to both your equipment mounting configuration(s) and your specific deburring applications. If you have a profile that s giving you headaches, we can design a built-to-profile brush using your wheel and a cross-section CAD drawing. A fitted brush requires less dressing-in and makes better contact for more efficient burr removal.
|
|
|
|
|
|
Model TBF abrasive brush
Abrasive brushes mounted on resin supports.
Ideal for clients looking for more aggressive, durable brushes.
The TBF system is designed to provide the brush with perfect harmony between durability and flexibility.
The studied diameter of our bundles, combined with the right inclinations and degradations provide our brush with perfect adaptability to the contour of the wheel rim, brushing its entire surface perfectly, including the corners of the hard-to-access windows.
Our TBF system is especially recommended for companies that have large production lines.
The brushes are supplied in different types of anchoring, depending on the needs of each client.
In addition, given the high quality of the filaments used, the brush is very long-lasting, avoiding unnecessary changes and stops in the machine.
Think no further, Kumex TBF brushes are the best choice for high quality production...
Available for wheel rims with the following diameters: 13" - 14" - 15" - 16" - 17" - 18" - 19" - 20" - 22"
Also produced in maximum density for the external part of the wheel rim.
|
|
|
Disc brushes are among KULLEN's most interesting products. They are used in industry as a rotating tool. Their quality is as reliable as the dependability of our choice of the right disc brush for your requirements. We guarantee this by manufacturing them on semi-automatic and automatic CNC machines. In addition to quality, we assure you of individual treatment - quality is inplicit and as you need we produce individual brushes for you. Disc brushes come in a wide variety of plastic, metal and wooden cores and bristle materials.
|
|
SIC and Diamond Abrasive Brushes for aging and burnishing of marble, granite, agglomerate, ceramics and stone in general.
Our vast range of products includes all market formats, and we are prepared to develop any of our clients’ demands.
At Kumex®, we offer the right balance between quality and price, supplying practically 80% of the European market.
We not only offer our clients a wide range of products, but also the possibility of developing exclusive products for very specific needs. To do so, we put at our clients’ disposal our extensive experience in the finishing industry and the cutting edge technology of our machinery.
Enabling us to manufacture our products, we have the market’s most advanced materials and cutting edge technology.
We can produce brushes with Diamond, SIC, Stainless Steel, Ceramic and our innovative Coex-R® filaments.
To know more about our filaments, diameters, geometries, percentages, etc., please consult our filaments section, in the products section.
|
|
|
Cubitron™ abrasive provides high cut while the flexible plastic brings superior cleaning to a wide variety of surface areas, without damaging the work piece. Eliminates flying wires common with traditional wire brushes.
|
|
Abrasive Brushes for Fineblanking
Model TBK brushes are frontal brushes prepared especially for planetary type deburring systems.
We have different models (TBK1-TBK2-TBK3-TBK4-TBK5, etc...), depending on the type of anchoring of the brush.
In turn, all models are produced with different diameters and distributions.
For greater precision all our supports are injection-moulded at the Kumex-Plastic-Systems® division of the Kumex® industrial group.
|
|
|
The modular principle underlying our one-way system of trapezoidal toothed roller brushes provides for fast, low cost changes of brushes. They can be installed and similarly removed by a simple hand operation. The teeth lock securely (and in a non-twist manner); as a result, a gap-free bristle surface is assured. Precise true running is guaranteed at all times. The DT system consists of brush segments which are mounted to the brush core with two locking collars. Due to the special modular principle on which they are based, worn individual segments on a roller brush can be replaced
|
|
|
|
|
|
Abrasive nylon disc brushing tools are ideal for deburring, polishing, finishing, cleaning metal surfaces and machined parts. Custom designed abrasive nylon disc brushes to meet the specific requirement for your application.
Disc Brushes Information
Abrasive nylon disc brushes are the latest products custom engineered and manufactured by Tanis Incorporated to meet our customer’s specific requirements. Disc brushes are made with metal back strip brush construction to achieve greater fill density. The increased density increases the aggressiveness and life of the product to maximize more parts per brush. With custom manufacturing, Tanis Incorporated abrasive nylon disc products are suited specifically for the application to reduce cycle times and eliminate secondary labor or machining operations.
Tanis Incorporated manufactures disc brushes in diameters ranging from 4” to 20”. Silicon carbide and aluminum oxide abrasive nylon filaments are available from 46 to 600 grit. The aggressive fill density, individual filament and desired trim length provide conformability to deburr, polish and finish complex parts. Disc brushes are designed to be power driven on CNC machinery and custom-designed machines used in automotive, extrusion, fine blanking, powdered metal, steel processing, woodworking, concrete and other industrial deburring applications. Smaller disc brushes can be used on hand tools for surface preparation.
Common Applications for Nylon Disc Brushes
|
|
|
Abrasive nylon small wheel brushes are used on both hand tools, drill presses and automated machinery. These small wheel brushes improve the surface of small parts and metal surfaces in a variety of deburring and finishing applications. Wheels are made from 1” to 4” in diameter with filament grits ranging from 80 to 500 grit. Wheel brushes are available in silicon carbide or aluminum oxide filaments.
|
|
MINIATURE BRUSH
Most effectively used for ultra-fine internal cleaning, deburring, reaming, and finishing applications. Manual or power use cleaning can be accomplished with precision and ease on metallic and non-metallic surfaces. Miniature and Micro-Miniature brushes for ultra-fine cross hole deburring, cleaning, blending and polishing of small diameter holes.
|
|
|
These brushes are varied for many different uses: not only for cleaning of tubes, gratings, sleeves and cylinders. Interior brushes regulate current velocity in tubing systems. They are similar to the double spiral tube brushes for deburring cross drillings etc.
|
|
Key Features:
- Sturdy, self-centering system
- Flexible filaments are engineered to provide the correct pressure to create an ideal hone - bore after bore
- Rigid abrasive media is firmly attached to the end of the flexible filaments making the tool excellent for tough cross-hole deburring and edge radiusing applications
- Available for hole diameters ranging from 6.4mm to 203mm
- Grit choices are available in Silicon Carbide & Aluminum Oxide from 60 through 320
|
|
|
For polishing, blending, burr removal, and cleaning. For use in power tools where heavy-duty cleaning is required. Made in high carbon steel, stainless steel, brass, nylon and all stainless steel.
|
|
| ... products without technical information |
| |
|
|