|
|
Generators (power supplies) create the high frequency energy that produces cavitation in the cleaning tank. Branson offers the broadest spectrum of equipment in the industry, including both magnetostrictive equipment and piezoelectric units with features like line/load regulation, true variable power control, sweep frequencies, power modulation and power monitoring.
|
|
are tried and tested devices which have been specifically developed for the high demands of industrial cleaning technology.
Due to their modular design they are perfectly suited for all applications.
• Constant power output – continuously adjustable
between 40 – 100 %
• Constant oscillation amplitude
• Interface for monitoring and controlling
process-relevant functions
• Protection from short-circuit, no-load operation,
overload and overheating comes as standard
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
Other frequencies available on request
|
|
Ultrasonic Generator Specification:
- Chassis case designed to allow access from all sides
- Case for generator complete with power lead
- Full range of variable frequency sweep control
- Full range of variable power control
- On/Off switch with output power indicator
- 240v, 50hz supply
- Maximum 750 watt power output (nominal 500watt)
- Utilising MOSFET technology
- Fully tried and tested in the field
- Fully protected against open and short circuit output
- CE certified
|
|
|
Our Immersion Type Ultrasonic Cleaning System (Ultrasonic Transducer + Power Generator) provide versatile ways to add ultrasonics to new or existing tankage in a variety of industrial settings. Each group of transducers comes with the power generator. Still, it offers all the power and effectiveness of ultrasonic cleaning in a more convenient way.
|
|
Power Sonics has several exclusive individual portable ultrasonic generators to significantly improve quality, reliability and performance of ultrasonic cleaning equipment and power our line of transducers.
GM Generator is a completely redesigned generator featuring IGBT technology and has a unique load compensating circuit that is particularly effective in gaseous solutions. A replaceable and cleanable filter is included over the air-cooling fan. The GM replaces the GL generator and provides the same improved cavitation and uniformity under less than ideal operating conditions. These generators power both the Type IP immersible transducers and the CT Type tanks (Transducerized Console Tanks).
|
|
|
piezoelectric and magnetostrictive ultrasonic generators, flanged or bulkhead mount submersible transducers. Available work frequencies from 19 to 70 kHz. Modular construction of the piezoelectric units allow to supply a generator also with different frequencies.
|
|
| ... products without technical information |
| |
MIG
Step-regulated industrial MiG/MAG
MIG is a range of robust, step-regulated, user-friendly and all-round machines for MIG/MAG dip-transfer or spray-transfer welding, from sheet metal and light structures to thick walls. Primarily develop-ed for mild steel but also applicable for stainless steel and aluminium.
MIG machines:
Many variants
There is always a MIG machine with high duty cycle for inten-sive quality welding day after day. Some models are supplied as C (compact) versions, others as STB versions (STB for separate wire-feed unit) and with option-al air-cooling or water-cooling.The many variants are designed based on the four primary models: MIG 305, 385, 445 and 545. The largest models feature four choke connections and up to 36 voltage steps.
The strong choke spool ensures fine ignition in dip-transfer welding and makes it possible to weld with solid or flux-cored wires in dimensions from 0.8 mm.MiG 385 STB MiG 445 STB MiG 545 STB 3 x 230 V/400 V 3 x 230 V/400 V 3 x 230 V/400 V 40-385 A A 40-445 A 40-545 A Energy-saving standby function for water pump/fan.MIG is supplied with several variants of both open and closed types of wire-feed units featuring four-spool drive and quick change of wires and spools. It is possible to use small or large wire spools or to feed wire from a drum.
|
|
The SASL200 power source, more powerfull, has been designed to offer modularity for the customer who can add functions in accordance to his markets: AVC, Wire feeder, oscillation for.
The user interface has been improved through a color touch screen remote control, 5.7 inches (multi-language)
SPECIFICATIONS :
-Welding type: TIG
-Arcstrike: HF or contact
-Welding Current: 3 à 210 A
-Network:
Autoline, 110V-230V with PFC
-Pulse time: from 0,01 to 8 sec
-Power Factor : 160 A (100%)
-Memory: 200 programs/20 levels on Compact Flash card (per card)
-Weight: 23 Kg
-L x l x h: 530x500x400 mm
-Multi-language: english, french, german, spanish, italian, korean, japaneese and chineese
-Thermic printer
-Compatible with all AXXAIR heads, SC and SAT and manual toches
|
|
Brushless alternating current welders (AC) and Brush Direct current welders (DC)
Insulation class: H
T.H.D. < 6%
Strike voltage: 45-60 V (AC) 65-85 (DC)
Usable electrodes: rutile, acid (AC) all types (DC)
Welding current: 130A to 220A (AC) 140-240 (DC)
Frequency: 50 o 60 Hz
Single Phase Generator (AC) Single Phase and Three Phase Generator (DC)
|
|
PSM 708
The PSM 408, PSM 508 and PSM 708 models are synergic power sources with electronic technology. The dynamics of these systems have been carefully studied for MIG/MAG continuous wire welding on carbon steel, stainless steel and aluminium, in both Short-Arc and Spray-Arc mode.
The models PSM 408-508-708 are provided with complete functions for Mig/Mag welding in manual and synergic mode, and guarantee optimal welding dynamics. The SCR electronic technology with digital control provides accurate linear regulation of the welding current voltage, permitting easy parameter regulation even at a distance.
Optimal starts (Hot-Start Mig Soft-Start and Burn-Back) and above all safety and dependability in all operating conditions.
The SYNERGIC control panel with numerous programs stored, makes these power sources extremely simple to use and suitable also for non-expert personnel. The Auto-Setting device allows the power source to automatically compensate for mains voltage variations, maintaining welding arc stability. The current and arc voltage values are shown on the digital display and at switch-off the last welding condition is stored.
The synergy permits automatic optimal setting of all the parameters, with extreme simplicity. All you have to do is determine, according to the type of material/gas used and the wire thickness, the ideal program in the table of synergic curves and then set the value of one of the following parameters: material thickness, welding current, wire speed.
|
|
The AC-225C is a stick welding power source with continuous output control from 40-225 amps. The AC-225C produces an extremely smooth welding arc, at any amperage setting, for most welding application. The AC-225C can be used for a variety of materials including carbon, low alloy and stainless steels, from 16 gauge sheet metal to heavy plate.
Applications include: maintenance repairs, fabricating or modifying equipment, building tools or fixtures, rebuilding worn parts or dies, and hardfacing new or worn parts for longer service life. Also used to repair or fabricate cast iron parts.
|
|
| ... products without technical information |
| |
The last generation ultrasonic generators DIGITAL SE series are designed and manufactured for ultrasonic welding of thermoplastic parts. The generators of this series are totally digital and allow all the most important adjustments typical of modern generators. The innovative programming system is done with a rotating selector switch with confirmation button.
All the setting operations are feasible with just one grip. The easy using, the available functions and the absolute reliability make this generator unique in its kind. All the generators Digital SE series are provided with a back-lit display and can be supplied with an elegant metal case or just as a module. The generator will be supplied with a high-efficienct converter completely made in titanium. The ultrasonic generators DIGITAL SE series are especially used for the construction of automatic machines.
TECHNICAL DATA
Power from 500 up to 3000 Watt
Frequency 20 - 36 kHz
Voltage 230 V 50 Hz
Amplitude adjustment 50-100 %
Time adjustment
Energy adjustment
Limit setting for quality control
Frequency control function
Piece counter function
Overload circuit
Dimensions 200x410x210 mm
|
|
The ultrasonic welding generators: DG machine, DG system & DG rack have been developed for the ultrasonic welding machines.
Reliable, these generators are all digital and allow a high quality monitoring control.
Technical data:
Power from 500 to 4 000 watts
Frequency 20, 30 & 40 kHz
Voltage 230 V 50 Hz
Dimensions 135x540x140mm
Ethernet connexion
Automatic tuning frequency during the welding process
Fitted out the last generation of microprocessor: RAM7 32bits
|
|
|
The ultrasonic welding generator "ACU" is suited for the operation and control of ultrasonic welding machines of the "Dynamic Series". In addition to the three different welding modes (time-, travel- and energymode) and the optimized force profiling the ACU features an electronic amplitude control. The optionally available software "ACUcapture" enables the download of welding parameters and graphics directly from the generator to the user's computer. "ACUremote" allows to modify the parameters whereby a remote maintenance is possible.
|
|
The EUROSONIC "HSC" generator series sets new standards as far as efficiency and compactness are concerned. The size has been reduced by up to 70% in comparison with standard generators. The sophisticated functional concept with its computer-aided high speed control system enables these devices to adapt perfectly to all loads.
A whole variety of new functions is provided for special fields of applications owing to the digital signal processing of the multiprocessor controlled generators.
|
|
| ... products without technical information |
| |
|
SIMCO Chargemaster systems are excellently suited for temporarily bonding materials; adhesion between the material surfaces is brought about by generating an electrostatic charge. As a result, production processes can often be simplified and accelerated. A system consists of a DC highvoltage generator and one or several charging electrodes. The generator generates the high voltage for the high voltage points in the electrodes. The high voltage points produce ions to charge the materials, which then adhere to each other or to other surfaces electrostatically. Highfrequency switching technology is used in the generators. This technology ensures a consistent output voltage at a preset value, until overloading. The generators are electronically current limited and protected from spark-over. Features of the modern design include the control panel, which has membrane switches and rotates through 180°.
|
|
|
The Meech Model 992v3 30kV Static Generator creates a controlled level of static charge to impart temporary bonding between materials, at least one of which is insulative. The 992v3 provides a high voltage output adjustable over the range 0-30kV or a constant current that can be adjusted between 0 and 500µA. The selected output voltage or current is shown on a digital display. The adjustability of the output voltage and current enables the unit to be used in a multitude of applications and with a variety of materials. The 992v3 is used in conjunction with the Model 993R sparkfree generator bar (refer to separate datasheet) and is available in either negative or positive output polarity versions.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
