|
|
Ultrasonic cleaning is faster, more consistent, and safer than any other method. Hand scrubbing, soaking, or steam don't even come close. The Bransonic® table top cleaners now include the same high power, rugged transducers found on industrial systems sold to the automotive, electronics, and metalworking industries. These Langevin-type metal/ceramic devices use engineered ceramics to assure both durability and superior power. Coupled with a new sweep frequency capability, you get the best possible cleaning every time, all the time.
Rugged enough for industry
Consistent enough to meet medical and laboratory standards
Safe enough for delicate electronic parts and precious jewelry
|
|
|
Bench top utrasonic cleaners are designed for use in a wide range of industrial applications. Designed for rugged use, all stainless steel construction is used.
|
|
The Turbo-Action Series from Graymills is the perfect solution for hands-off, immersion cleaning
required for challenging parts cleaning applications. Turbo-Action total immersion parts cleaners convert
the jet stream from Graymills Superflo pumps into powerful, hands-off fluid action that gets parts cleaner
without manual handling or scrubbing. Unlike spray cabinet type cleaners that employ spray nozzles,
total immersion cleaners bring cleaning action to every external and internal surface-even blind holes.
Turbo-Action units scour and flush parts clean and are offered in both solvent and heated aqueous
versions with pumps that provide up to 10,000 GPH. The heated aqueous units come standard with
energy-savings insulation and corrosion-resistant insulated stainless steel-lined lids.
|
|
Double-walled insulated wash tank and hinged lid
Brass 1.00" ball valve drain
Stainless Steel parts Basket
On board heat with digital thermostat control
Wave Sweep: Eliminates standing waves and promotes uniform cleaning
Power Intensity Control: allows user adjustable power output for delicate cleaning when needed; Output shown on LED display
Soft Start: Eliminates electronic failures from current inrush loads on start-ups
Stainless Steel Cart with Locking Castors Available
|
|
|
The XD Series Ultrasonic Wash Tanks are large capacity units designed for heavy-duty industrial applications as well as smoke and fire restoration. Units are complimented with versatile insert tanks for use as rinsing, presoaking or indirect ultrasonic cleaning. Units also include parts baskets and modular ultrasonic components. Stainless steel construction is used throughout to ensure durability even in the most demanding environments. Available in four models and tank sizes.
|
|
Unit Features:
- Double-walled insulated wash tank and hinged lid
- Heavy duty 4" soft ride locking castors
- Brass 1.25" ball valve drain.
- Three stainless steel parts Baskets or stainless steel.
high-duty parts rack (specify when ordering).
- Stainless steel power station for ultrasonic generators-One
button operation.
- On board heat with digital thermostat control.
- Filtration System: High-volume 5 Micron replaceable cartridge.
with stainless steel housings.
- Filtration Pump: Stainless impeller with up to 40 GPM
flow rate.
- Wave Sweep: Eliminates standing waves and promotes
uniform cleaning.
- Power Intensity Control: allows user adjustable power
output for delicate cleaning when needed. Output shown
on LED display.
- Soft Start: Eliminates electronic failures from current
inrush loads
on start-ups.
|
|
The Clean-O-Matic Series progresses
in size and power from the 300-A,
with a 1/8 horsepower pump and
42-gallon capacity, to the 902-A, with
two 1/3 horsepower pumps and
117 gallon capacity.
All models feature three way cleaning—
pump for in-tank agitation that loosens
dirt/grime on soaking parts; pistol grip
nozzle for flushing away contaminants;
and Flexible Stay-Put flush hose in
conjunction with a hand-held brush.
|
|
Ultrasonic Parts/Restoration & Blind Cleaner-
The versatility of modular construction allows the user to have 2 different tank configurations using a matched set of 2400 Watt ultrasonic components
|
|
ULTRASONIC CLEANING BATHS
Pulsatron KC and MKC ultrasonic baths provide safe, fast and effective cleaning in a fraction of the time required by hand cleaning. Lightly soiled items such as jewellery may take only seconds, while medium soil is normally removed in two minutes or so.
Items benefiting include jewellery, clock and watch parts, optical lenses and frames, dental and surgical instruments, printed circuit boards, and manufactured parts in production or maintenance.
KC baths have a simple on/off switch for the ultrasonics.
Microprocessor controlled MKC baths, available in capacities of
6, 14 and 22 litres (approx), allow the user to pre-set exact cleaning times (up to 99.9 mins) and temperatures (from 20 to 80°C), thus ensuring the same high level of cleanliness every time.
|
|
Bench-Top Ultrasonic Cleaner - DC Series (Heavy Duty)
SPATECH D-DC ultrasonic series, our featured product, a selection of D and DC (heavy-duty) series of ultrasonic bench-top cleaners with different tank size, output power, output frequency to match your cleaning needs. Special attention has been paid to its effectiveness, technical features, user friendliness and design.
These models are ideally suited for washing small industrial parts, as well as for commercial /consumer uses. Applications include, but are not limited to: jewelry, optical parts, small gears, machined parts, bearings, carburetor components and surgical instruments. All Systems Include:--
Stainless steel tank construction
Stainless steel basket
Adjustable timer for ultrasonic control
240V AC standard
110 or 115V AC available
Adjustable, thermostatically controlled heat (for models with heater)
|
|
SPATECH D-DC ultrasonic series, our featured product, a selection of D and DC (heavy-duty) series of ultrasonic bench-top cleaners with different tank size, output power, output frequency to match your cleaning needs. Special attention has been paid to its effectiveness, technical features, user friendliness and design.
These models are ideally suited for washing small industrial parts, as well as for commercial /consumer uses. Applications include, but are not limited to: jewelry, optical parts, small gears, machined parts, bearings, carburetor components and surgical instruments. All Systems Include:--
Stainless steel tank construction
Stainless steel basket
Adjustable timer for ultrasonic control
240V AC standard
110 or 115V AC available
Adjustable, thermostatically controlled heat (for models with heater)
|
|
|
Our stencil cleaner is designed to remove all solder paste types including Rosin ('R', 'RMA', 'RA'), Water Soluble (OA), and No-Clean Paste...as well as adhesives from stencils, screens, musprinted boards, and related components. The system is designed to operate with a variety of CFC-Free, environmentally friendly cleaning chemistries.
|
|
Ultrasonic cleaning SONOWAVE
with external generators are specifically designed for the high demands made during industrial use.
• Cleaning tank made of 2 mm stainless steel 1.4571
Base of the tank made of 3 mm stainless steel 1.4571
Casing made of 1.5 mm stainless steel 1.4301
• Ultrasonic generator with all features of the SONIC DIGITAL generator series
• Heating with digital temperature control up to 80° C and digital display
• Digital time setting and display
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
• Multi-frequency cleaning tank
|
|
INDUSTRIAL CLEANING TANKS
Pulsatron KS ultrasonic cleaning tanks are robustly constructed using AISI 316L polished stainless steel for durability, while Kerry Pulsatron ultrasonic generators ensure powerful parts cleaning and long equipment life. Typical uses include:
* Production cleaning - removal of oils, swarf, polishing compound, brazing flux, solder flux, carbonised deposits, moulding residues
* Refurbishment of computer, photocopier and engine components
* Maintenance of mould tools, extrusion dies, printing components, surgical instruments, electronics assembly system parts, and small machine components
KS tanks are microprocessor controlled for precision and repeatability. Sonics may be set in 6 second increments up to 99 minutes, and solution temperature may be set in the range 20 - 80°C in 1°C increments.
Standard KS systems operate at 38 kHz (±10%); however, optional
Neptune generator control allows switchable dual frequency
(35/70 kHz ±10%), variable power control and programmable operation of up to seven programs.
|
|
Standard and bespoke sizes available.
Single tank ultrasonic aqueous cleaning system with the following features:
- All stainless steel
- BSP drain valve
- Heated tank
- Thermostatically controlled
- Bolt in transducer plate
- Separate generator (see below)
- Tank size (as required)
- Overall size (as required)
- Capacity (as required)
- Industrial standard - continually rated
- Insulated frame
- Basket & lid inclusive
- Table top mounted
- Operates from standard mains volatage
- CE certified
|
|
|
ultrasonic cleaning tanks, single or two-stage cascade immersion and spray-rinsing tanks, hot air dryers, vacuum dryers, centrifugal dryers, solvent dryers, ultrasonic degreasing machines, spray-cleaning machines.
|
|
|
The tanks of cleaning of range SETSONIC constitutent work stations for the applications of cleaning in detergent bath for the production lines and the services of maintenance in many industrial fields.
|
|
Generators (power supplies) create the high frequency energy that produces cavitation in the cleaning tank. Branson offers the broadest spectrum of equipment in the industry, including both magnetostrictive equipment and piezoelectric units with features like line/load regulation, true variable power control, sweep frequencies, power modulation and power monitoring.
|
|
·Matched Ultrasonic Generators and Ultrasonic Transducer Packs.
·Power Available - 600, 900 and 1200 Watts
·Pulse/Wave Sweep and Adjustable Power Intensity Control on Ultrasonic Generators
·AC operation - 120v, 220v, or 240v
·Frequencies Available - 28 or 40kHz
·Power Intensity Control includes Stand By Mode with Soft Start Feature to eliminate "in-rush" current-Prolongs circuitry life
·Auto Tuning Circuitry - Finds Optimum Cleaning Frequency to eliminate dead zones - Achieves Uniform Cleaning
|
|
are tried and tested devices which have been specifically developed for the high demands of industrial cleaning technology.
Due to their modular design they are perfectly suited for all applications.
• Constant power output – continuously adjustable
between 40 – 100 %
• Constant oscillation amplitude
• Interface for monitoring and controlling
process-relevant functions
• Protection from short-circuit, no-load operation,
overload and overheating comes as standard
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
Other frequencies available on request
|
|
Ultrasonic Generator Specification:
- Chassis case designed to allow access from all sides
- Case for generator complete with power lead
- Full range of variable frequency sweep control
- Full range of variable power control
- On/Off switch with output power indicator
- 240v, 50hz supply
- Maximum 750 watt power output (nominal 500watt)
- Utilising MOSFET technology
- Fully tried and tested in the field
- Fully protected against open and short circuit output
- CE certified
|
|
|
Our Immersion Type Ultrasonic Cleaning System (Ultrasonic Transducer + Power Generator) provide versatile ways to add ultrasonics to new or existing tankage in a variety of industrial settings. Each group of transducers comes with the power generator. Still, it offers all the power and effectiveness of ultrasonic cleaning in a more convenient way.
|
|
Power Sonics has several exclusive individual portable ultrasonic generators to significantly improve quality, reliability and performance of ultrasonic cleaning equipment and power our line of transducers.
GM Generator is a completely redesigned generator featuring IGBT technology and has a unique load compensating circuit that is particularly effective in gaseous solutions. A replaceable and cleanable filter is included over the air-cooling fan. The GM replaces the GL generator and provides the same improved cavitation and uniformity under less than ideal operating conditions. These generators power both the Type IP immersible transducers and the CT Type tanks (Transducerized Console Tanks).
|
|
The UES tank systems are offered in a modular construction with flexible tank volumes from 4 kg - 105 kg and selectable hose connections from 2 to 16.
The electronic control with LED display, 4-line display or large-surface touch screen with multi-lingual display, enables simple operation of the hot glue system.
A wide range of options are available for optimum integration - from the removable display through to the additional pump. Integrated signal and control contacts enable communication with the central production control.
The tank systems are connection-compatible with Nordson® or other systems.
|
|
| ... products without technical information |
| |
|
|
