|
|
3M Sorbents can be used in a wide variety of applications ranging from simple maintenance to emergency spill clean-up. Sorbents help ensure your workplace is kept clean and safe and reduce damage to the environment.
3M sorbents are designed to be used for specific jobs and materials. Some can be used for general maintenance applications while others are designed to handle petroleum or chemical spills and clean-up.
|
|
Chemical absorbents are designed to absorb almost all industrial solvents, acids and alkalis including: acetic acid, ammonia, calcium hydroxide (limewater), hydrochloric acid, hydrofluoric acid, nitric acid, perchloric acid, phosphoric acid, potassium hydroxide (caustic potash), sodium carbonate (washing soda), sodium hydroxide (caustic soda), sulphuric acid, toluene, trisodium phosphate and xylene. Chemical absorbents are colour coded green.
|
|
Bench Top & Cupboard Styles
Evaporation from drips and open containers contributes considerably to poor quality air within the laboratory. The Bigneat range of storage cabinets removes vapours, purifies the laboratory air and enhances the long-term health of laboratory personnel.
Main Features:
. Continually cleans up and purifies laboratory air.
. May be used when ducted extraction is unavailable.
. No outside exhaust necessary for vapours.
. Fully mobile, a simple electrical connection is all that is needed.
. Energy saving, cost effective & safe.
|
|
THE AIR OF THE LABORATORY IS PURIFIED
The air released by the filter contains 100 times less pollutants than the acceptable values defined by official authorities.
STANDARD EQUIPMENT :
•Electronic "fan failure" alarm for the continuous monitoring system of the ventilation.
•Sampling port for testing the saturation level of the filter.
VERY SILENT TURBINE FAN
Only 49 dBA
GOOD VISION OF THE STORAGE
Thanks to lockable transparent UV resistant door.
EASY TO SET-UP CLOSE TO THE USERS WORKSTATION
Does not require any ducting.
SPILL TRAY FILLED WITH AN ABSORBING MAT
To contain potential spill from broken containers.
|
|
The FS5000 Flow Switch Controller is designed for use in applications that require flow/no-flow control of metering pumps and other devices. It includes a flow switch and three (3) 115V receptacles that are powered with flow and one (1) 115V service receptacle. Power indicator light, flow indicator light and test switch are included.
|
|
OPERATION PRINCIPLE
Operating by batch between 2 levels. The constant concentration is designed between 50 and 150 g/l, which ensures good homogeneousness of the slurry.
Equipment :
- Tank made of HDPE
- Agitator support
- Anti-vortex blades
- Inspection door
- Water inlet line
- Floating gauge level detection
- Overflow
- Version : 1 000 L or 2 000 L
Ø Standardised and optimised design
Ø Fully equipped compact unit
Ø Easy assembly
Ø Simple operating process
Ø Ready to use
|
|
These rugged, chemical duty pumps are available in CPVC (Corzan®), fiberglass reinforced Polypropylene, and PVDF. Precision molded, dynamically balanced, "enclosed" impellers allow pumping of abrasive solutions and operating against closed discharge valves.
|
|
| ... products without technical information |
| |
Microprocessor-controlled instrument amplifier with integrated controller for water analysis of:
pH
Redox
Ion concentration
Electrolytic conductivity (conductive and inductive)
Active chlorine concentration
Total chlorine concentration
Chlorine dioxide concentration
Oxygen concentration
Ozone concentration
Hydrogen peroxide concentration
Features:
Backlit 2-line alphanumeric LC display with measuring units
Clear text human-machine interface with only 5 touch keys
Password protection against unauthorized operation
Temperature compensation manual or via Pt 100 / 1000 / NTC 22 kOhm (3-wire)
Galvanic separation of inputs and outputs
2 analog outputs, user configurable
Integrated controller with 2 switching points
2 limit switches with time-delay, allocated to alarm relay
Display of operating and status messages
|
|
Hand-Held pH, Redox, Temperature Measuring Unit HND-R
Liquid Filled pH Combined Electrode, APS-X2Q
Gel-filled pH-Combined Electrode APS-X1Q
pH Electrode with Plastic Sheathing, APS-X5K
Gel Filled Combined Electrode, ARS-X1Q
Transmitters for pH-Value and ORP, APM-X
Gel-filled pH-Combined Electrode APS-Z
Transmitters for pH-value APM-Z
Gel Filled ORP Electrode, ARS-Z
Transmitter for ORP, ARM-Z
ORP Electrode with Plastic Sheathing, ARS-X5K
Inductive Conductivity Measuring Cell ACS-X0I
Hand-Held Conductivity Measuring Unit HND-C
Conductive Conductivity Measuring Cells, ACS-X
Transmitter for Specific Conductivity, ACM-X
Conductive Conductivity Measuring Cells, ACS-Z
Inductive Conductivity Measuring System, ACI-Z
Transmitter for Specific Conductivity, ACM-Z
Accessories for Analysing Devices
|
|
Gear pumps are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from choccolate to diesel fuel. Our gear pumps have sturdy design, offering high reliability as well as long life.
Johnson Pump's gear pump design is based on an internal idler gear rotating inside of a larger rotor. Internal gear pumps are robust, give an even flow, handle both low and high viscosity products, are capable of high pressure and are self-priming.
Johnson Pump manufactures the TopGear-series of internal gear pumps; with the TG L-range for low viscosity - high volumetric efficiency, TG G-range for general purpose and the TG H-range for high demanding applications.
|
|
Maag Pump Systems Textron builds its gear pumps to a modular design that adapts easily to customers’ requirements and industrial standards.
Housings are available in iron, steel or stainless steel, with or without heating jackets. Bearings, shafts and gears offer a similarly wide choice of materials and configurations.
Five classes of axial clearance and eight classes of radial clearance, coupled with Maag’s expertise in simulation, allow individual pumps to be specified for the highest possible efficiency. A wide choice of seals ensures safety in demanding applications.
|
|
44-2200 Series: General Purpose/Compact-Reducing
1/4" inlet and outlet ports
Diaphragm sensed - highly sensitive
Various trim options available
44-2600 Series: General Purpose/Large Diaphragm
Increased sensitivity, minimal droop
Repeatability: ±1/2% of outlet pressure range
Accuracy: ±1% of outlet pressure
44-2800 Series: Accurate/Positive Seal-Reducing
Mechanical link between diaphragm & main valve prevents pressure creep
Positionable captured vent bonnet
44-3400 Series: Two Stage-Reducing
Decaying inlet characteristic: .04 per 100 PSIG inlet pressure change
Various trim options available
|
|
|
The Type 350/360/370SS series of stainless steel regulators, filter regulators and filters are designed to stand up to the harshest environments while providing highly accurate pressure regulation. Proven 316 stainless steel housing and filter assemblies along with fluorocarbon diaphragm construction make the 350/360/370SS compatible with sour gas and adaptable to off shore environments. This quality instrument is economical to buy as well as operate, and provides extremely stable and repeatable control of gas pressure. Oversized valving helps the unit achieve high flow rates with minimal pressure drop.
|
|
|
DPP offers an assortment of quality reciprocating piston pumps used in a wide range of applications, from critical medical devices to chemical dosing/metering equipment and laboratory analysis equipment; all superbly manufactured to the highest possible standards. Tests show that the consistency of our product performance is second to none, which makes DPP the first choice for very low controlled and repeatable flow application requirements.
|
|
Dual pump high flow high pressure pump unit type BMS
Whenever high flow and high pressure is required, the Resato BMS will provide it. Quick testing or testing of large objects is possible with an optional high flow low pressure air driven pump. This additional pump can be a single- or double acting one.
The Resato mobile pump unit is a self-contained air-driven unit of proven design. Not only can it be used to pressurize valves, fittings, hoses, piping, vessels and wellhead equipment, but is also suitable for supply of hydraulic power to operating cylinders, presses, rams, jacks, bolt tensioners and actuators.
All components, including the necessary connecting materials and tubing are built together in a stainless steel frame complete with stainless steel tank or direct water feed connection. The Resato Portable Power pack is manufactured according to European regulations and will be delivered including:
Operating-, Maintenance- and spare parts manual
Test certificate.
Calibration certificate for gauge and / or recorder.
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
The dosing pump DUO CCS is working with the patented Chemical Control System CCS to control the used chemical permanently as well as the fill up level of the chemical container. Automatic switch off of the pump when mix up chemical or empty container. The tubematerial is also be secured against "wrong " chemical; the washing result can be re-produced at any time.
|
|
# Chemical process with very easy use
# 3 m3 of hydrogen gas produce in less than 10 minutes
# Especially adapted to isolated regions
# Gas reserve possible
Easy to handle, this generator does not require any maintenance other than its cleaning after each hydrogen production operation.
|
|
Due to their high insulation thickness, pressings are suitable
for extreme application range in terms of thermal and climatic load cases.
|
|
|
