|
|
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
The PGC 4.5 cu. ft. chamber features our unique humidity control system that enables the user to attain unsurpassed levels of RH/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor transmission.
Applications are found in such diverse industries as pharmaceutical development and manufacturing, electronic components, food, semiconductor, paper and pulp, and wherever precise humidity and temperature replications are required.
|
|
An Unsurpassed RH Control of ±0.5%
The PGC 30 cu. ft. chamber features our unique humidity control system that enables the user to attain unsurpassed levels of relative humidity/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor tranmission.
The interior chamber is constructed of very durable, corrosion resistant 316 stainless stell. Low watt density heaters are used that also contribute to the unit's longer life.
Should your application require it, the chamber air flow can be factory-configured from the standard horizontal flow to vertical. Other options include extended ranges, chart recorders, a window in the outer door, and a clean inner door with optional iris opening.
|
|
|
|
|
|
TAPPI Rooms
AN UNSURPASSED RH CONTROL OF ±0.5%
TAPPI Room PDF Parameter Generation and Control (PGC) manufactures TAPPI room systems and conditioners for existing laboratories. These systems provide the precise temperature and humidity control required by TAPPI T402 om-88.
We offer a complete package:
We manufacture your room or chamber to operate at both the TAPPI and TAPPI preconditioning specification. System can automatically cycle between the two conditions.
Complete installation on site anywhere in the world.
On-site start-up instruction.
PC based monitoring systems comes standard with each unit. System monitors temperature, relative humidity, saturator, and mechanical outputs.
Calibration and PM contracts.
Extremely precise control and uniformity within the room or chamber allows for the customer to easily validate at the targeted position.
Our unique dew point control systems utilize much less energy than other stability control systems.
Our systems do not utilize maintenance intensive boilers and steam injectors that require high purity water.
|
|
|
|
|
|
The PGC 7000 series chambers feature our unique humidity control system that enables the user to attain unsurpassed levels of RH/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor transmission.
Applications are found in such diverse industries as pharmaceutical development and manufacturing, electronic omponents, food, semiconductor, paper and pulp, and wherever precise humidity and temperature replications are required.
Additionally, PGC’s SmartPad microprocessor controller is a user-friendly system that provides optimum accuracy and control. The SmartPad is equipped with direct readings in both temperature and humidity. It also features 40-segment programming for automatic cycling and ramping and soaking excursions. High-low or deviation alarms as well as digital communications ports are standard features.
The interior chamber is constructed of very durable, corrosion resistant stainless steel. Low watt density heaters are used that also contribute to the unit’s longer life.
Should your application require it, the chamber airflow can be factory configured from the standard horizontal flow to vertical. Other options include extended ranges, chart recorders, a window in the outer door, and a clear inner door with optional iris opening. System includes free logging software.
|
|
Parameter Generation and Control (PGC) manufactures pharmaceutical stability rooms and chambers for the storage of products that require environmental conditions that must adhere to ICH guidelines.
We offer a complete stability package:
- We manufacture your room or chamber to operate at any ICH condition including: 25°C/60% RH, 30°C/75% RH, 30°C/65% RH, 40°C/75% RH, and 5°.
- Complete installation on site anywhere in the world.
- Validation packages (IQ, OQ, PQ) utilizing state of the art mapping systems.
- 21 CFR part 11 compliant monitoring systems.
-Calibration and PM contracts.
|
|
|
|
|
|
PGC has been providing high quality walk-in chambers since the mid-1970's. These environmental chambers have applications in diverse disciplines such as pharmaceutical stability testing, TAPPI and ASTM testing, biological and biotechnological research, electronics, and many other applications.
Our many years of experience in designing, manufacturing and installing walk-in rooms enable us to provide the user with unparalleled expertise. PGC's staff will assist in planning your room to meet your specific needs.
PGC will provide sole-source responsibility for both room construction and its conditioning equipment. Using modular insulated panels having either a 32 Rvalue (four inch) or a 40 R-value (five inch), enables PGC to deliver maximum efficiencies and uniformities.
FEATURES:
- RH uniformity to ±0.5%
- Temperature uniformity to ±0.5°C
- Multi-range rooms from -30°C to +60°C
- Humidity ranges from 10% to 90% RH
- Modular insulated panels
- Rooms factory-tested prior to
- shipment
BENEFITS:
- Unsurpassed humidity performance
- Superb temperature stability
- Flexibility of operation
- Increased measurement options
- Ease of assembly
- Assurance of proper operation
|
|
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
PGC's humidity generating systems are unique. The sources for humidity,
dehumidification, heating, cooling, and circulation are all packaged in
one self-contained unit. This unit is specifically designed to provide 500-
1000 CFM of conditioned air to rooms up to 2200 cubic feet. The conditioner is designed to produce very precise humidity and temperature
control.
Since this generating unit is selfcontained, it can be easily used to
condition existing spaces, small walkin rooms, and custom chambers. The
conditioner can be positioned on top or beside of existing chambers or rooms to circulate conditioned air through the contained space.
FEATURES:
- Precise temperature and humidity control
- High grade temperature compensated humidity sensor
- Stainless steel construction
- High-low or deviation alarms
- Compact Package
BENEFITS:
- Consistent and accurate results
- Confidence in the measured condition
- Durable
- Security and safety
- Easy to apply
|
|
Advanced Gas, Steam and Hydro turbines
A comprehensive range of turbines for all applications, from industrial power generation up to the largest power plants in the world
Alstom's turbine range includes advanced gas, steam and hydro turbines for power generation, mechanical drives and propulsion systems. Our global capabilities also include service, maintenance, refurbishment and upgrading of turbine plants and training of personnel.
-gas turbines from 56 MW up to 288 MW for turnkey power plants including simple cycle, combined cycle, repowering and retrofit
-steam turbines from 100 MW up to 1200 MW for fossil steam turbines and up to 1800MW for nuclear steam turbines
-steam turbine retrofits
-hydro turbines for all types of hydropower plants; high or low head, storage and run-of-the-river
-hydraulic and pump turbines up to 900 MW
|
|
A comprehensive range of turbines for all applications, from industrial power generation up to the largest power plants in the world
Alstom's turbine range includes advanced gas, steam and hydro turbines for power generation, mechanical drives and propulsion systems. Our global capabilities also include service, maintenance, refurbishment and upgrading of turbine plants and training of personnel.
-gas turbines from 56 MW up to 288 MW for turnkey power plants including simple cycle, combined cycle, repowering and retrofit
-steam turbines from 100 MW up to 1200 MW for fossil steam turbines and up to 1800MW for nuclear steam turbines
-steam turbine retrofits
-hydro turbines for all types of hydropower plants; high or low head, storage and run-of-the-river
-hydraulic and pump turbines up to 900 MW
|
|
... see all the products in the category
Turbines
|
AN UNSURPASSED RH CONTROL OF ±0.5%
Stability Room PDF Parameter Generation and Control (PGC) manufactures pharmaceutical stability rooms and chambers for the storage of products that require environmental conditions that must adhere to ICH guidelines.
We offer a complete stability package:
* We manufacture your room or chamber to operate at any ICH condition including: 25°C/60% RH, 30°C/75% RH, 30°C/65% RH, 40°C/75% RH, and 5°.
* Complete installation on site anywhere in the world.
* Validation packages (IQ, OQ, PQ) utilizing state of the art mapping systems.
* 21 CFR part 11 compliant monitoring systems.
* Calibration and PM contracts.
Extremely precise control and uniformity within the room or chamber allows for the customer to easily validate at the targeted position.
Our unique dew point control systems utilize much less energy than other stability control systems.
Our systems do not utilize maintenance intensive boilers and steam injectors that require high purity water.
|
|
FEATURES
PRODUCT FEATURES
● Smallest available footprint
● High system efficiency
● Harmonic cancellation
● Transient protection
● High-speed voltage regulation
● Power factor improvement
● Top and bottom cable entry
● 40° C rating on entire system
● Low input current distortion
● Utilizes kinetic power cell technology
● Simple installation
● Low maintenance
● Quiet operation
● Optional redundant energy storage
● Expandable for future capacity growth
● Optional generator set start module
RELIABLE POWER PROTECTION FOR CRITICAL
APPLICATIONS
Cat® UPS systems provide constant power protection
against surges, sags, and power interruptions that
can disrupt operations or cause loss of valuable
data or system capacity. Additionally, the use of
the optional generator set start module can
dramatically increase generator set starting
reliability in a continuous power configuration.
|
|
|
... see all the products in the category
UPSs
|
|
|
