|
|
Atlas offers two types of environmental testing chambers, a temperature testing chamber and a full climatic chamber for temperature and humidity testing. Atlas partners with Weiss Umwelttechnik GmbH (Weiss Technik) for the marketing and production of standard climatic test chambers in the United States and Canada.
WT11-180/40 and WT11-340/40 Temperature Chamber
340 litre / 12 cu ft exposure zone
A versatile, state-of-the-art environmental chamber for temperature testing.
WK11-180/40 and WK11-340/40 Temperature and Humidity Chamber
340 litre / 12 cu ft exposure zone
A versatile, state-of-the-art environmental chamber for climatic (temperature and humidity) testing.
|
|
Since the real corrosive environment changes from day to day (or faster), labs expose samples to various environmental stresses that promote corrosion. Lab technicians spend countless hours transferring specimens from one environment to another; a salt fog cabinet for corrosion; an oven for dry heat; a sink for direct spray, etc. Newer technology in corrosion equipment now creates these desired environments within one cabinet that significantly reduces the need to move or otherwise touch test specimens.
CCX Advanced Cyclic Corrosion Cabinet
Performs advanced cyclic corrosion tests - as well as basic cyclic tests and traditional salt fog (spray) and humidity tests.
|
|
There are two main types of xenon arc instrument, water cooled and air cooled. The type of cooling has only a negligible effect on the spectral output of the lamp, but does have an influence on the overall design and on the optical filtering system. Atlas Fade-Ometers and Weather-Ometers use water-cooled xenon arc exclusively; the Atlas Xenotest instruments and the Atlas SUNTEST exposure units use air-cooled xenon lamps.
Ci4000 Xenon Weather-Ometer®
The most advanced xenon weathering test instrument in the market
|
|
Laboratory Test Chambers
Temperature and Climatic Test Chambers
Series VTL and VCL
Compact, quiet, yet powerful units are required to tackle special requirements within limited laboratory space. Also tests are made on smaller specimens - all this directly at the work station.
The VTLand VCL series of temperature and climatic test chambers are ideally suited to such applications.
Test space volumes
34, 64 and 100 l
Temperature range from
+10°C to +180 °C
-40 °C to +180 °C
-70 °C to +180 °C
Humidity range
10 to 98 % RH
Control System:
Controller Board MINCON/32 with Controller Element MINCONTROL
Option Colour touchpanel)
|
|
Environmental simulation chambers for complex alternating climatic profiles
BINDER MKF series:
The MKF series is ideally suited for all tests in accordance with current temperature and climatic test standards based on DIN and IEC standards. The required temperature and humidity values can be attained rapidly and maintained accurately, even under extreme conditions. The unparalleled ease of operation as well as extensive standard features provide that ‘little extra’ in handling.
|
|
Constant Climatic Test Chambers
series VC 0...
We have designed the VC 0... series especially for the simulation of constant climates.
Test space volumes
190, 335, 600, 990 and 1540 l
Temperature range for climatic tests
+10 °C to +90 °C
Humidity range
10 % to 98 % RH
Calibration values as per ICH
+25 °C / 60 % RH
+40 °C / 75 % RH
The performance range for only temperature tests is wider.
The documentation of temperature and humidity is obtainable via an interface and our optional software S!MPATI or software S!MPATI Pharma (in accordance with FDA 21 CFR, Part 11).
Controll System:
Controller Board M!NCON/32
with removable Colour Touchpanel.
Qualification documentation according to FDA requirements is available.
|
|
Ransco Thermal Shock Chambers-RTS
Ransco, a product group of Despatch Industries, has been the innovator in thermal shock testing for 30+ years.
Accelerated life cycle testing
Climatic operating / storage testing
Single or double load capacity
Burn-in
Temperature cycling
Performs to MIL STD 883C
Performs to JESD22
Remote access
Touch screen controls
24/7 reliability
World-side service & support
Our chambers are engineered for today’s demands with maximum throughput, pinpoint analysis, cost effective design, quality construction, versatility and a sleek professional appearance.
Ransco’s vertical design and one piece construction conserves valuable floor space without sacrificing ease of operation. Product is moved from cold to hot zone chambers by a pneumatically operated elevator with adjustable transfer speeds. For safety the fan, elevator and conditioning systems shut off automatically when the door is opened. Uniform horizontal airflow insures proper heat transfer, excellent thermal gradient and the rapid temperature recovery rates critical for maximum throughput and proper test performance. All of Ransco’s systems are equipped with high-efficiency, water-cooled mechanical.
|
|
Environmental simulation chambers for constant climatic conditions
BINDER KBF series:
The KBF series was particularly designed for absolutely reliable stability tests and precise maintenance of constant climatic conditions. It naturally also complies with all applicable guidelines such as ICH, FDA, GMP and GLP, with respect to programming and documentation requirements; with its large reserve capacity and many optional features, it is designed to meet future challenges for many years to come.
|
|
Temperature Test Chambers VT³
und Climatic Test Chambers VC³
If you are looking for top quality and unmatched performance, then Vötsch has just what you need !
Our completely new temperature and climatic test chambers VT³ and VC³-available in spring 2007- have almost magical control precision.
With S!MPAC* and S!MCONTROL* our revolutionary concept for operation, control and process visibility, these chambers provide features light-years ahead of all others.
Remote control, remote operation, remote monitoring and diagnostics - operation of these chambers is a real joy.
Excellent technical details and many little things make the difference. Absolute safe function of the test chambers, also during high summer temperatures, along with the maintaining of the water quality of the climatic system is guaranteed.
|
|
|
SHEL LAB Humidity Test Cabinets provide a controlled environment for a wide range of industrial and biotechnology testing applications. This line is designed to duplicate a natural condition, which allows testing the limitations of a sample when exposed to various temperature and moisture fluctuations.
|
|
Temperature Test Chambers 110/200 l
for the laboratory
VT 4011, VT 7011, VT 4021, VT 7021
Laboratory Scope ...
Temperature test chamber with the ideal performance range for constant and cyclic temperature tests.
All of these extremely compact systems offer a remarkable test space volume. Rapid temperature cycles, high heat compensation and a low noise level make these systems highly favourable for use in electronic and pharmaceutical laboratories. Although these chambers are of a 1-phase design, they are extremely efficient.
The powerful 32-bit control and communication system provides the highest level of operation convenience, with the removable, menu-controlled touchpanel with graphics-capable display.
Test space volumes 110 and 200 l
Temperature range -40 °C to +180 °C and -70 °C to +180 °C
Control System:
Controller Board with removable Colour touchpanel.
|
|
Vibration test systems
Temperature and Climatic Type VTV and VCV
Vötsch vibration test systems enable you to simulate dynamic processes, i.e. mechanical and thermal processes affecting components and assemblies.
Regardless of whether mechanical, hydraulic or electro-dynamical vibrators are required, we cooperate with all well-known national and international manufacturers of vibrators.
The standard range comprises of 36 different types of systems. Special equipment is available and can be customized as required (see special applications).
Test space volumes
600 l, 1200 l and 2200 l
Temperature range
-40 °C to +180 °C and -70 °C to +180 °C
Humidity range (VCV)
10 % to 95 % RH
Temperature rate of change
5 K/min, 10 K/min and 15 K/min (optional to 30 K/min)
Control System:
Controller Board S!MCON/32-NET with removable Colour touchpanel.
|
|
Temperature Walk-In Test Chambers
Series VTZ
Standardized temperature test chambers with test space volumes from 8 to 22 m³ and different performance ranges of -60 °C to +150 °C for environmental tests of large or numerous small specimens.
Accelerated and still reproducible tests as well as temperature tests for the quality control of manufacturing processes are possible.
Control System:
Controller Board S!MCON/32-NET with installed Colour touchpanel.
|
|
SAL Table Top models 400 L / 1000 L
The unique 400 L salt spray cabinet can be placed either on an existing laboratory table or on the original VLM support. This offers the most convenient and space saving configuration of the cabinet, test solution reservoir and water purification plant. Only compressed air has to supplied. If there is no central plant you will find very low-noise compressors among the accessories.
Front door opening cabinets allow most convenient loading of the chamber particularly with hanging specimen. Moreover the cleaning of the chamber is easy. Due to the high level of the drain port there will be enough downward slope to the commonly installed siphons.
The side walls of the chamber are made of polyethylene with milled holes for the specimen support. The water trough, the back wall and the inner roof are made of stainless steel coated with Halar® (ECTFE). This unique design allows a quick transfer of the heat into the chamber. Together with the advanced temperature control system best conditions for the precise tempering of the chamber are provided.
For that reason SAL cabinets can also be applied to conducting of high humidity tests after the extension by the working system „CON“. |
|
The PGC 4.5 cu. ft. chamber features our unique humidity control system that enables the user to attain unsurpassed levels of RH/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor transmission.
Applications are found in such diverse industries as pharmaceutical development and manufacturing, electronic components, food, semiconductor, paper and pulp, and wherever precise humidity and temperature replications are required. |
|
Corrosion Test Apparatus for Salt Spray Tests, Model 606
For tests in accordance with all salt spray standards. Corrosion resisting test chamber with circular dome or rectangular chamber, of plastic construction. Special dimensions upon request. Operator friendly controls for up to 2 test chambers with volumes of 400 l, 1000 l and /or 2000 l. |
|
Alternatively to our salt spray tests bench top cabinets and HD-chest models we offer the most favourable "ECONOMY" chests with 600L and 1000 L chamber capacity. These models are especially designed pursuant to the requirements of salt spray tests according to ASTM B117, ASTM B368, BS 3900 ECCA T8 JIS 7253 DIN 50021 SS, ESS,CASS resp. ISO 9227.
The side- and front walls are made from polypropylene. Following the VLM prinicles the EC-chest model are as well furnished with a ECTFE coated stainless steel bottom. Compared to conventinal chests the EC-chambers show a considerably better heat conductivity. For this reason the chamber will be heated up evenly and rapidly. Moreover due to this benefit, EC-chests can also be used for high humidity tests with constant water condensation pursuant to ISO 6270-2 CH.
The EC-cabinets are furnished with a transparent cover with turnable locks at both sides with a "dry" seal made of silicon foam. Hence, there is not only a convenient cleaning or loading of the chamber with the specimens. More important: As the chamber is hermetically closed during the tests there is no risk of contamination of the lab by escaping salt mist. An air purge is a serial feature and has to be activated before the cover is opened.
|
|
PGC has been providing high quality walk-in chambers since the mid-1970's. These environmental chambers have applications in diverse disciplines such as pharmaceutical stability testing, TAPPI and ASTM testing, biological and biotechnological research, electronics, and many other applications.
Our many years of experience in designing, manufacturing and installing walk-in rooms enable us to provide the user with unparalleled expertise. PGC's staff will assist in planning your room to meet your specific needs.
PGC will provide sole-source responsibility for both room construction and its conditioning equipment. Using modular insulated panels having either a 32 Rvalue (four inch) or a 40 R-value (five inch), enables PGC to deliver maximum efficiencies and uniformities.
FEATURES:
- RH uniformity to ±0.5%
- Temperature uniformity to ±0.5°C
- Multi-range rooms from -30°C to +60°C
- Humidity ranges from 10% to 90% RH
- Modular insulated panels
- Rooms factory-tested prior to
- shipment
BENEFITS:
- Unsurpassed humidity performance
- Superb temperature stability
- Flexibility of operation
- Increased measurement options
- Ease of assembly
- Assurance of proper operation
|
|
Range of enclosure of laboratory
Temperature and climatic
Type VTL and VCL
Of compact construction, powerful, especially adapted for a use in laboratory when the place is limited.
Volumes of work
34 liters and 100 liters
Beach of work in temperature
+10°C with +150°C
-40°C with +150°C
-60°C with +150°C
Beach of relative humidity
10 to 98% hr
For more information to consult us
|
|
Chalmbres of climatic tests for constant climates, range VC 00.
Volumes of tests 190,335,600,990 and 1540 liters
Operating range in temperature with regulation of the relative humidity
+10°C with +90°C
Beach of work in relative humidity
10% to 98% hr
2talonnage with values ICH
25°C/65%hr
40°C/75%hr
Beach of work in temperature without broader relative moisture.
For more information to consult us.
|
|
cold heat Standard VT
cold heat Standard moisture VC
The new generation of climatic chambers enables you to carry out tests according to the national standards and international.
Beach of temperature of -40 °C with 180 °C
and of -70 °C with 180 °C.
Volume of tests: 190,335,600,990 and 1500 L.
|
|
Salt spray alternate climates Standard SC
For tests reproducible of corrosion, in conformity
with the national standards and international, such as DIN, NF, ISO, ASTM, DEF, MIL-STD, etc .....
|
|
Tenney T2 Series
Tenney's new T2 Chamber is capable of simulating a wide range of temperature and humidity conditions while utilizing minimal floor space. These chambers are well suited for use in electronics, military, and pharmaceutical quality assurance and reliability testing, as well as research testing and production processes. In keeping with the needs if today's lab, we specifically designed these chambers to have a compact exterior, yet an ample interior workspace to maximize valuable floor space.
Features
All models feature vapor-tight, continously welded stainless steel interiors
New design allocates space within the interior of the cabinet for all standard options, which greatly improves the mobility of the unit as well as the overall appearance
New touch screen controller provides precise control over chamber operations and monitoring, and is mounted at eye level (VT III and 94Z are not touch screen)
Workspace height has been lowered to provide efficient loading and unloading of product
The sensors provide excellent control and display accuracy with minimum maintenance
New design provides maximum performance with minimum footprint
Uniform conditions are assured through the use of a vertical-down recirculating conditioning system
|
|
Vibration Test Systems
Few companies can match the technology provided by Tenney Environmental. Since 1932, Tenney has supplied the test industry with innovative solutions that have reshaped just about every category of environmental simulation and test.
Features
Sound-friendly design exhausts operating air and noise out the top of the unit.
New touch screen microprocessor based controller is conveniently placed at operator eye level.
Optional viewing window is wiperless.
Removable panels for cleaning of air cooled condenser.
Floppy drive can be used for collecting and downloading data or for uploading programs.
Optional dry air package allows for the attainment of low humidities down to 5% and dew points below 2°C.
Optional 19 liter reservoir and recirculating humidity water system.
Removable access panels provide ample room for regular maintenance of modular compressor skid.
We offer one of the widest selections of standard compressor packages to tailor your unit according to your testing requirements.
Compressor packs are available in 1½, 2, 3 and 5, in single or cascade systems.
|
|
Climatic chamber of 320 DM ³
Empty Hot cold
Connect
Space industry
Aircraft industry
Application
Tests of bodies (valves and flexible devices) equipping the circuits with the satellites and spacecrafts under the conditions with real temperature and pressure.
Description of the equipment
Cast solid unit including/understanding:
The enclosure of tests with the machinery with the back of the box including/understanding the circuit of conditioning in temperature by cold circuit cascades R23/R404 and heat by electrical resistances, as well as the circuit of vacuum,
Supervision and computer material of piloting of the whole of the bench. |
|
Connect
Auto industry
Automobile industry of subcontracting
Application
Resistance and endurance tests of the hinges of automobile door.
Description of the equipment
Together including/understanding:
The climatic room with its conditioner in temperature and rails of drive,
The machinery placed behind the room, including/understanding the refrigerating circuit and the production of moisture,
The electrical equipment box placed on with dimensions one of the machinery with the orders in frontage,
The condenser of the refrigerating circuit placed outside the building,
Software SIRPAC under WINDOWS XP (Integrated system of Regulation, Programming, Acquisition and Control) and the computer material (PC, printer,...) |
|
Climatic chamber of 2,8 m ³
On pot and mobile plate
Wet Hot cold
ATEX
Zone 1 interior/Zone 2 outside
Connect
Research laboratory
Auto industry (tests of combustible pile for auto industry)
Application
Realization of tests in temperature and moisture controlled in an enclosure adapting on dischargers (pot & table). So the enclosure, interdependent of its technical compartment, has a height of easily adjustable plate (by the means of a lifting table) and mobile (thanks to the wheels of the table).
Description of the equipment
Cast solid unit including/understanding:
The enclosure (with before) of tests with its conditioning,
Conditioning by:
- Cold: circuit cascades R23/R404
- Heat: coolant |
|
DSET Laboratories, Inc. pioneered accelerated outdoor weathering in the 1960's with its Fresnel-reflecting solar concentration devices - Emma® (Equatorial Mount with Mirrors for Acceleration) and EMMAQUA® (Equatorial Mount with Mirrors for Acceleration with Water). Economical, proven and continuously improved for even greater accuracy, EMMAQUA is the most widely used outdoor accelerated weathering test method in the world today.
The test apparatus is a follow-the-sun rack with mirrors positioned as tangents to simulate a parabolic trough.
The target board, located at the focal line of the mirrors, lies under a wind tunnel along which a deflector directs ambient temperature cooling air across the specimens. A fan spray nozzle assembly is employed to spray the specimens with deionized water in accordance with established schedules. Night time spray cycles can be used to keep the specimens moist during the night time hours.
Atlas recommends the exposure of test specimens based on an accumulated dose of ultraviolet radiation measured in MJ/m2. However, test can also be timed on total radiation, Langleys, or real time. The duration can be based on Arizona or Florida radiation equivalents. The UV radiation must be measured as direct beam to avoid errors when evaluating the exposure duration. |
|
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap wate | | |
