|
|
Environmental simulation chambers for constant climatic conditions
BINDER KBF series:
The KBF series was particularly designed for absolutely reliable stability tests and precise maintenance of constant climatic conditions. It naturally also complies with all applicable guidelines such as ICH, FDA, GMP and GLP, with respect to programming and documentation requirements; with its large reserve capacity and many optional features, it is designed to meet future challenges for many years to come.
|
|
|
|
|
|
Ascott Cyclic Corrosion Test Chambers
Key features
Ascott cyclic corrosion test chambers - one of the world most sophisticated and versatile corrosion test systems available - with the design and quality that right for today laboratory environment.
More key features
-Low loading threshold on all floor standing models for ease of loading/unloading especially at the back of the chamber
-Large capacity salt solution reservoir with graduated sight glass for ease of monitoring solution levels
-Unique salt spray atomizer to guarantee uniform salt spray distribution
-Catchpots® - salt spray remote fall-out facility allows salt spray to be continuously collected and measured without interrupting the test
-Pneumatically operated canopy for opening & closing chamber at the push of a button
-Touch-screen control panel for ease of programming, with graphical display of temperature/humidity profiles
-Dry seal gasket to canopy prevents wetting of operator's clothes, etc
-Choice of canopy colors with transparent interior viewing window
-Automatic air purge facility
-Calibration certificate
-Sample racks
-Consumables spares kit
|
|
|
|
|
|
Ascott Cyclic Corrosion Test Chambers
Key features
Ascott cyclic corrosion test chambers - one of the world most sophisticated and versatile corrosion test systems available - with the design and quality that right for today laboratory environment.
More key features
-Low loading threshold on all floor standing models for ease of loading/unloading especially at the back of the chamber
-Large capacity salt solution reservoir with graduated sight glass for ease of monitoring solution levels
-Unique salt spray atomizer to guarantee uniform salt spray distribution
-Catchpots® - salt spray remote fall-out facility allows salt spray to be continuously collected and measured without interrupting the test
-Pneumatically operated canopy for opening & closing chamber at the push of a button
-Touch-screen control panel for ease of programming, with graphical display of temperature/humidity profiles
-Dry seal gasket to canopy prevents wetting of operator's clothes, etc
-Choice of canopy colors with transparent interior viewing window
-Automatic air purge facility
-Calibration certificate
-Sample racks
-Consumables spares kit
|
|
|
|
|
|
Ascott Cyclic Corrosion Test Chambers
Key features
Ascott cyclic corrosion test chambers - one of the world most sophisticated and versatile corrosion test systems available - with the design and quality that right for today laboratory environment.
More key features
-Low loading threshold on all floor standing models for ease of loading/unloading especially at the back of the chamber
-Large capacity salt solution reservoir with graduated sight glass for ease of monitoring solution levels
-Unique salt spray atomizer to guarantee uniform salt spray distribution
-Catchpots® - salt spray remote fall-out facility allows salt spray to be continuously collected and measured without interrupting the test
-Pneumatically operated canopy for opening & closing chamber at the push of a button
-Touch-screen control panel for ease of programming, with graphical display of temperature/humidity profiles
-Dry seal gasket to canopy prevents wetting of operator's clothes, etc
-Choice of canopy colors with transparent interior viewing window
-Automatic air purge facility
-Calibration certificate
-Sample racks
-Consumables spares kit
|
|
Key features
Ascott cyclic corrosion test chambers - one of the world's most sophisticated and versatile corrosion test systems available - with the design and quality that's right for today's laboratory environment.
Three model sizes:
450 Ltr (15.8 cu ft) - the ever popular
1000 Ltr (35.3 cu ft) - big enough for most samples
2000 Ltr (70.6 cu ft) - for the very largest samples.
Touch-screen control panel:
Using the 'touch-screen' control panel Ascott cyclic corrosion test chambers can be programmed to link together a variety of environments: salt spray, temperature, humidity (wet/dry) to form a corrosion cycle.
Extensive optional testing facilities:
Extensive range optional testing facilities, such as refrigeration and liquid immersion.
|
|
|
|
|
|
Ascott Salt Spray Corrosion Test Chambers
Key features
Ascott salt spray cabinets and chambers - one of the world's most modern and most versatile salt spray corrosion test systems - and with design, ergonomics and quality that's in a class of its own.
Chambers to cover every testing requirement from continuous salt spray test through to condensation humidity and modified tests.
More key features
-Low loading threshold on all floor standing models for ease of loading/unloading especially at the back of the chamber.
-Large capacity salt solution reservoir, removable cassette for bench model and mobile tank for floor standing models. Features graduated sight glass for ease of monitoring solution levels.
-Unique salt spray atomizer to guarantee uniform salt spray distribution.
-Catchpots® - salt spray remote fall-out facility allows salt spray to be continuously collected and measured without interrupting the test.
-Pneumatically operated canopy for opening & closing chamber at the push of a button
-Dry seal gasket to canopy prevents wetting of operator's clothes, etc
-Choice of canopy colors with transparent interior viewing window
-Automatic air purge facility
-Calibration certificate
-Sample racks
-Consumables spares kit
|
|
The high-flyer in testing technology!
Fast and precise temperature changes from - 42 °C to +190 °C lastingly reduce your process times! Innovative technology and the highest operating comfort combined to create a powerful duo for controlled material and function tests, with the TTC temperature test chamber and the CTC climatic test chamber with active humidification and dehumidification.
A top performance by the experts for controlled atmosphere. Efficient and flexible environmental testing and simulation. Worldwide.
|
|
Environmental simulation chambers for complex alternating climatic profiles
BINDER MKF series:
The MKF series is ideally suited for all tests in accordance with current temperature and climatic test standards based on DIN and IEC standards. The required temperature and humidity values can be attained rapidly and maintained accurately, even under extreme conditions. The unparalleled ease of operation as well as extensive standard features provide that ‘little extra’ in handling.
|
|
The PGC 4.5 cu. ft. chamber features our unique humidity control system that enables the user to attain unsurpassed levels of RH/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor transmission.
Applications are found in such diverse industries as pharmaceutical development and manufacturing, electronic components, food, semiconductor, paper and pulp, and wherever precise humidity and temperature replications are required.
|
|
Laboratory Test Chambers
Temperature and Climatic Test Chambers
Series VTL and VCL
Compact, quiet, yet powerful units are required to tackle special requirements within limited laboratory space. Also tests are made on smaller specimens - all this directly at the work station.
The VTL and VCL series of temperature and climatic test chambers are ideally suited to such applications.
Test space volumes
34, 64 and 100 l
Temperature range from
+10°C to +180 °C
-40 °C to +180 °C
-70 °C to +180 °C
Humidity range
10 to 98 % RH
Control System:
Controller Board S!MPAC* with Touchpanel
|
|
We have developed these insulation rooms to be used for high-temperature and climate simulations.
Their basic design corresponds to the ILKAsim system and features mineral-wool insulation as well as a vapour-tight welding of the interior.
This guarantees perfect tightness even under extreme conditions.
Of course, this system can be tailored to your needs and requirements, too.
|
|
Atlas offers two types of environmental testing chambers, a temperature testing chamber and a full climatic chamber for temperature and humidity testing. Atlas partners with Weiss Umwelttechnik GmbH (Weiss Technik) for the marketing and production of standard climatic test chambers in the United States and Canada.
WT11-180/40 and WT11-340/40 Temperature Chamber
340 litre / 12 cu ft exposure zone
A versatile, state-of-the-art environmental chamber for temperature testing.
WK11-180/40 and WK11-340/40 Temperature and Humidity Chamber
340 litre / 12 cu ft exposure zone
A versatile, state-of-the-art environmental chamber for climatic (temperature and humidity) testing.
|
|
Constant Climatic Test Chambers
series VC 0...
We have designed the VC 0... series especially for the simulation of constant climates.
Test space volumes
190, 335, 600, 990 and 1540 l
Temperature range for climatic tests
+10 °C to +90 °C
Humidity range
10 % to 98 % RH
Calibration values as per ICH
+25 °C / 60 % RH
+40 °C / 75 % RH
The performance range for only temperature tests is wider.
The documentation of temperature and humidity is obtainable via an interface and our optional software S!MPATI or software S!MPATI Pharma (in accordance with FDA 21 CFR, Part 11).
Controll System:
Controller Board M!NCON/32
with removable Colour Touchpanel.
Qualification documentation according to FDA requirements is available.
|
|
Test Climatic Chamber of Temperature and Relative Humidity
General Description
Our Equipments with Temperature Control (cooling/heat) and Humidity are conceived for to simulate the more several environmental conditions then it could generate in the nature, in the same way so accelerated environmental conditions to be inspired in the industrialized world (DIN, UNE, MIL, ASTM, IEC, Automotive Norms and Pharmaceutical Norms - ICH/FDA).
Each enterprise is a world and the essay it carry out are differents according to manufactured product and the sector where it going runs. Evidently the Climatic Chambers it isn't all identical neither to be useful for it same. It has necessary, well to know of precedence what's the customer like to essay and which are the characteristics of that essay: to adapt the Chamber to Customer, and not the Customer to the Chamber.
|
|
Since the real corrosive environment changes from day to day (or faster), labs expose samples to various environmental stresses that promote corrosion. Lab technicians spend countless hours transferring specimens from one environment to another; a salt fog cabinet for corrosion; an oven for dry heat; a sink for direct spray, etc. Newer technology in corrosion equipment now creates these desired environments within one cabinet that significantly reduces the need to move or otherwise touch test specimens.
CCX Advanced Cyclic Corrosion Cabinet
Performs advanced cyclic corrosion tests - as well as basic cyclic tests and traditional salt fog (spray) and humidity tests.
|
|
|
|
|
|
Ransco Thermal Shock Chambers-RTS
Ransco, a product group of Despatch Industries, has been the innovator in thermal shock testing for 30+ years.
Accelerated life cycle testing
Climatic operating / storage testing
Single or double load capacity
Burn-in
Temperature cycling
Performs to MIL STD 883C
Performs to JESD22
Remote access
Touch screen controls
24/7 reliability
World-side service & support
Our chambers are engineered for today’s demands with maximum throughput, pinpoint analysis, cost effective design, quality construction, versatility and a sleek professional appearance.
Ransco’s vertical design and one piece construction conserves valuable floor space without sacrificing ease of operation. Product is moved from cold to hot zone chambers by a pneumatically operated elevator with adjustable transfer speeds. For safety the fan, elevator and conditioning systems shut off automatically when the door is opened. Uniform horizontal airflow insures proper heat transfer, excellent thermal gradient and the rapid temperature recovery rates critical for maximum throughput and proper test performance. All of Ransco’s systems are equipped with high-efficiency, water-cooled mechanical.
|
|
|
|
|
|
Temperature and Climatic Stress Screening Systems
Series VTS and VCS
These systems designed on the basis of the well-proven modules of the VT and VC series with enhanced heating, cooling and air circulating efficiency, create the required high temperature changing rates on test specimens and, if necessary, in combination with electrical stress. These systems quickly reveal weak points in the design, material and production of electronic assemblies.
Moreover, the VCS series allows the realization of all customary test standards. Special attention has been given to a design offering satisfactory heat compensation.
We offer 52 different types in standard design.
Test space volumes
(at 5 K/min) 190, 335, 600, 990, 1540 l
(at 10 and 15 K/min) 270, 480, 800, 1300 l
Temperature range
-40 °C to +180 °C and -70 °C to +180 °C
Humidity range (for VCS)
10 % to 98 % RH
Temperature rates of change
5 K/min, 10 K/min and 15 K/min
For special applications we produce test chambers with temperature rates of change up to 30 K/min.
Control System:
Controller Board S!MCON/32-NET with removable Colour touchpanel.
|
|
|
|
|
|
The PGC 7000 series chambers feature our unique humidity control system that enables the user to attain unsurpassed levels of RH/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor transmission.
Applications are found in such diverse industries as pharmaceutical development and manufacturing, electronic omponents, food, semiconductor, paper and pulp, and wherever precise humidity and temperature replications are required.
Additionally, PGC’s SmartPad microprocessor controller is a user-friendly system that provides optimum accuracy and control. The SmartPad is equipped with direct readings in both temperature and humidity. It also features 40-segment programming for automatic cycling and ramping and soaking excursions. High-low or deviation alarms as well as digital communications ports are standard features.
The interior chamber is constructed of very durable, corrosion resistant stainless steel. Low watt density heaters are used that also contribute to the unit’s longer life.
Should your application require it, the chamber airflow can be factory configured from the standard horizontal flow to vertical. Other options include extended ranges, chart recorders, a window in the outer door, and a clear inner door with optional iris opening. System includes free logging software.
|
|
Temperature Test Chambers VT³
und Climatic Test Chambers VC³
If you are looking for top quality and unmatched performance, then Vötsch has just what you need !
Our completely new temperature and climatic test chambers VT³ and VC³-available in spring 2007- have almost magical control precision.
With S!MPAC* and S!MCONTROL* our revolutionary concept for operation, control and process visibility, these chambers provide features light-years ahead of all others.
Remote control, remote operation, remote monitoring and diagnostics - operation of these chambers is a real joy.
Excellent technical details and many little things make the difference. Absolute safe function of the test chambers, also during high summer temperatures, along with the maintaining of the water quality of the climatic system is guaranteed.
|
|
|
The Test in Fog Salina Spray consist in an accelerated corrosion attack by an artificial fog saline spray of defined composition, in the precise conditions of temperature and pressure. An important characteristic of this kind of Test with respect to another ones of simulation of ambiental conditions is their perfect reproductibility that allows to realize the Corrosion Test in a controlled, comfortable and practical way, according to the present Legal Regulations. Our Chambers are easy adapted to all these Legal Regulations.
|
|
There are two main types of xenon arc instrument, water cooled and air cooled. The type of cooling has only a negligible effect on the spectral output of the lamp, but does have an influence on the overall design and on the optical filtering system. Atlas Fade-Ometers and Weather-Ometers use water-cooled xenon arc exclusively; the Atlas Xenotest instruments and the Atlas SUNTEST exposure units use air-cooled xenon lamps.
Ci4000 Xenon Weather-Ometer®
The most advanced xenon weathering test instrument in the market
|
|
|
|
|
|
TAPPI Rooms
AN UNSURPASSED RH CONTROL OF ±0.5%
TAPPI Room PDF Parameter Generation and Control (PGC) manufactures TAPPI room systems and conditioners for existing laboratories. These systems provide the precise temperature and humidity control required by TAPPI T402 om-88.
We offer a complete package:
We manufacture your room or chamber to operate at both the TAPPI and TAPPI preconditioning specification. System can automatically cycle between the two conditions.
Complete installation on site anywhere in the world.
On-site start-up instruction.
PC based monitoring systems comes standard with each unit. System monitors temperature, relative humidity, saturator, and mechanical outputs.
Calibration and PM contracts.
Extremely precise control and uniformity within the room or chamber allows for the customer to easily validate at the targeted position.
Our unique dew point control systems utilize much less energy than other stability control systems.
Our systems do not utilize maintenance intensive boilers and steam injectors that require high purity water.
|
|
900 Benchtop Temperature Chamber
The 900E Series chambers are designed for high and low temperature simulation where high performance and close temperature tolerance are required. The units are ideal for small lot qualification testing, burn-in, life test, temperature cycling or research and development. All models may be easily modified to add access ports, fixturing, instrumentation, etc., to meet special customer needs. All 900E Series are bench models designed for continuous use with ease of operation and maintenance in mind.
|
|
Temperature Test Chambers 110/200 l
for the laboratory
VT 4011, VT 7011, VT 4021, VT 7021
Laboratory Scope ...
Temperature test chamber with the ideal performance range for constant and cyclic temperature tests.
All of these extremely compact systems offer a remarkable test space volume. Rapid temperature cycles, high heat compensation and a low noise level make these systems highly favourable for use in electronic and pharmaceutical laboratories. Although these chambers are of a 1-phase design, they are extremely efficient.
The powerful 32-bit control and communication system provides the highest level of operation convenience, with the removable, menu-controlled touchpanel with graphics-capable display.
Test space volumes 110 and 200 l
Temperature range -40 °C to +180 °C and -70 °C to +180 °C
Control System:
Controller Board with removable Colour touchpanel.
|
|
|
Fluorescent UV lamps, similar in mechanical and electrical characteristics to those used for residential and commercial lighting, have been developed with specific spectral distributions. Tests using fluorescent lamps are useful for relative rank comparisons between materials under specific conditions, but the comparison to service lifetime performance or correlation to outdoor exposures may not be valid. The best use of the UV lamps is for general screening tests, such as checking for gross formulation errors with an artificially harsh exposure.
|
|
|
vibration cabinets for horizontal and vertical vibration combined with various types of shakers. Very high rates of increase and decrease for the temperature.
|
|
Vibration test systems
Temperature and Climatic Type VTV and VCV
Vötsch vibration test systems enable you to simulate dynamic processes, i.e. mechanical and thermal processes affecting components and assemblies.
Regardless of whether mechanical, hydraulic or electro-dynamical vibrators are required, we cooperate with all well-known national and international manufacturers of vibrators.
The standard range comprises of 36 different types of systems. Special equipment is available and can be customized as required (see special applications).
Test space volumes
600 l, 1200 l and 2200 l
Temperature range
-40 °C to +180 °C and -70 °C to +180 °C
Humidity range (VCV)
10 % to 95 % RH
Temperature rate of change
5 K/min, 10 K/min and 15 K/min (optional to 30 K/min)
Control System:
Controller Board S!MCON/32-NET with removable Colour touchpanel.
|
|
optimized design of the refrigerating units as well as of respective vaporizer, compressor and air outputs.
individual electric and mechanic interfaces towards the specimen or the measuring system.
|
|
|
|
|
|
PGC has been providing high quality walk-in chambers since the mid-1970's. These environmental chambers have applications in diverse disciplines such as pharmaceutical stability testing, TAPPI and ASTM testing, biological and biotechnological research, electronics, and many other applications.
Our many years of experience in designing, manufacturing and installing walk-in rooms enable us to provide the user with unparalleled expertise. PGC's staff will assist in planning your room to meet your specific needs.
PGC will provide sole-source responsibility for both room construction and its conditioning equipment. Using modular insulated panels having either a 32 Rvalue (four inch) or a 40 R-value (five inch), enables PGC to deliver maximum efficiencies and uniformities.
FEATURES:
- RH uniformity to ±0.5%
- Temperature uniformity to ±0.5°C
- Multi-range rooms from -30°C to +60°C
- Humidity ranges from 10% to 90% RH
- Modular insulated panels
- Rooms factory-tested prior to
- shipment
BENEFITS:
- Unsurpassed humidity performance
- Superb temperature stability
- Flexibility of operation
- Increased measurement options
- Ease of assembly
- Assurance of proper operation
|
|
Temperature Walk-In Test Chambers
Series VTZ
Standardized temperature test chambers with test space volumes from 8 to 22 m³ and different performance ranges of -60 °C to +150 °C for environmental tests of large or numerous small specimens.
Accelerated and still reproducible tests as well as temperature tests for the quality control of manufacturing processes are possible.
Control System:
Controller Board S!MCON/32-NET with installed Colour touchpanel.
|
|
|
|
