|
|
CNC Automatic Lathe SC-20
- Low price and satisfactory standard specifications.
- Low production cost due to reduction of materials.
- Headstock and tool post configuration of high rigidity and high precision.
SPECIFICATIONS
Max. machining diameter 20mm(25/32in)
Max. headstock stroke Bar diameter×2.5(max.55mm)
4-spindle sleeve holder (for front working side)
- Max. drilling capacity 10mm(25/64in)
- Max. tapping capacity M8×P1.25
Power-driven attachment
- Max. drilling capacity 6mm(15/64in)
- Max. tapping capacity M5×P0.8
Main spindle speed max.10,000min-1
Main spindle motor 2.2kw/3.7kw
Power-driven att. spindle speed max.5,000min-1
Power-driven att.drive motor 0.4kw
Dimension(W×D×H) 1,855×1,060×1,750mm
Weight 1,600kg
|
|
Horizontal pick-up turning-lathes
Short idle times and low production costs can only be achieved with fast automation of component handling. With the Horizontal-CNC-Lathe MHC Pick-Up and the Vertical CNC-Turning-Lathe MVC PickUp Monforts presents two solutions to meet the market requirements, for all kinds of series productions.
|
|
|
|
|
|
The HT lathes are the right answer in case of machining on limited dimensions. All the main parts of the machine are in cast iron, which assures the rigidity as well as the long life of the machine. The bed is of single type with three ways, the rear way is of prismatic type while the central and front ways are of flat type. The central way is of double type in order to allow a free movement of the carriage aside of the tailstock and of the steady rests.
The HT lathe can support up to 18 tons between centres and they can machine work piece with up to 1.600 mm diameter and any length longer than 3 metres.
The HT lathes are equipped with different Turning units, according to the specific needs, such as a square 4 positions turret, a 12 position disc turret with live tools. They are also designed to have a vertical Y axis.
The HT lathes can be equipped with Working units to perform multiple drilling operations, grinding, drilling/milling and boring operations. The lathes can be equipped with Steady rests, available in different models and clamping ranges.
|
|
|
The high-end model of the long-selling BNC Series carries Miyano's tradition of automatic barwork. Designed for processing small workpieces, it features live tooling and easy setup change between bar and chuck work. Many hours of unmanned operation is supported by the latest NC functions and a variety of options.
|
|
M150
Technical Data
- Centre distance 2000/3000/5000/6500 mm
- Swing over top slide 1500 mm
- Swing over bottom slide 1590/1570/1510/1470 mm
- Standard chuck ø 800 mm
- Max. power main spindle at 100% duty cycle 60/90 kW
- Max. torque main spindle at 100% duty cycle 4470/10248
- Max. speed main spindle 1600/1000 min-1
- Max. power milling spindle at 100% duty cycle 55 kW
- Max. torque milling spindle at 100% duty cycle 730 Nm
- Max. speed milling spindle 3200 min-1
- Max. pressure of coolant through spindle 80 bar
- Swivelling range B-axis -110/+90
- Travel Y-axis 650 (-300/+350)
- Travel X-axis 1120 mm
- Quill ø 240 mm
- Steady rest clamping ø max. on request
- Tool magazine 36/72/108 number
- Control: SIEMENS type SINUMERIK 840 D
|
|
|
|
|
|
The Leonard machines are a complete and modular range of Horizontal Lathes for the machining on medium to large work pieces with highest performances in terms of rigidity for rough operations and precision for finishing operations. The main feature of these machines is the technology of the preloaded Hydrostatic ways which are successfully used for both cross and longitudinal slides.
Other machining operations can be performed with the Leonard system, like Boring, Milling or Drilling operations. The different working units can be Combined on a column with rotating base ("B" Axis) or on different Pallets to be manually or automatically installed in the carriage.
The Leonard lathe can be supplied with different type of Steady rests according to the work piece and the required machining.On demand different accessories are available like the work piece probe, the tool probe and the Automatic tool changer.
Safop has developed some special system for the measuring of high sophisticated work pieces like the turbine rotors. The Run Out Measurement System and Blade Measurement System are used with success by the main producers of this type of work pieces.
|
|
Drilling
Machining with coolant supply through the tool, regardless if the tool is in radial, axial or in an inclined position. Accuracy-killing changes between various machines is avoided.
Thanks to very high feed forces and high power also at low speed drills with large diameter can be used with optimum performance. A single look into the speed-power-diagram or the speed-torque-diagram shows the difference...
|
|
|
Buffoli Trans-N-Center is a new innovative concept in transfer machines. It is a "design concept" that integrates high production modules and flexible modules achieving the goal of machining a wide range of parts with transfer machine cycle times. Its advantages include: short cycle times, exceptional versatility, ease of programming and high precision machining in one clamping.
|
|
Turning
Turning tools can be swiveled 180° for left-and right hand side operations or inclined in the B-axis. 50% machining time reduction by 4-axes turning. High metal removal due to high torque.
ID-turning
For long ID-turning operations the MILLTURN offers a heavy-duty dovetail accommodation for excellent support of long boring bars. U-drills, rotating deep hole drilling tools with internal coolant supply. Vibration damped boring bars can be used up to a dia. – length ratio of 1 : 14.
Also NC-controlled contouring boring bars (trepanning) can be used, e.g. for jet engine shafts with small ID´s.
|
|
|
|
|
|
The Leonard machines are a complete and modular range of Horizontal Lathes for the machining on medium to large work pieces with highest performances in terms of rigidity for rough operations and precision for finishing operations. The main feature of these machines is the technology of the preloaded Hydrostatic ways which are successfully used for both cross and longitudinal slides.
All the Leonard Lathes are designed with 4 ways, therefore the carriage can pass freely either at side of the tailstock and steady rests. Depending on the model they can have a single bed (L- 60/1500, L-60/1800, L-70 e L-80) or double bed (L-60/2500, L-70/3000, L-80/4000 e L-100).
The headstock unit is designed with three speed range and it can be equipped with high precision indexing "C" axis. The spindle can be supported by conventional roller bearings or alternatively by Hydrostatic bearings in case of high precision machining needs.
On the Hydrostatic carriages different turning units can be supplied according to the requests: Blades, Square turret, Disc turret 12 positions eventually with live tools. Also the vertical "Y" Axis can be supplied on demand.
|
|
For the 4 axes turns and turn centers the same as already stated for for the previous models applies, except that this is the one with the largest production capability produced bi IMT Intermato {turning diameter up to 1200 mm. and a maximum diameter up to 1208 mm. allowed).
The S32 and the S50 turns series successfully demonstrate the conception of modular design and construction that up to now lead to IMT Intermato's success.
|
|
|
|
|
|
Our concept for turning from 2 to 8 axes.
STRUCTURE - STRUCTURE
This robust structure, of high stability, rests on a cast solid base.
The advantages of the reconstituted Granite are multiple:
Rigidity:
Rate of depreciation 8 times higher than the cast iron.
Reduction by 3 of the amplitude of the vibrations in machining.
Thermal stability: Conductibility 15 times lower than the cast iron.
Results on machining: Improvement of the surface quality.
High degree of accuracy of machining.
Behavior of the coasts.
Increase of 30% of the lifespan of the tools
PINS - SPINDLES
DELTAMAB 400:
Stitch of 8 " with passage Ø 73 mm (4500 rpm - 15/23 kw) equipped according to version tools or production, of a manual chuck Ø 250 mm or of an automatic chuck Ø 230 Misters.
Option: Stitch of 8 " with passage Ø 105 mm (3200 rpm - 22/36 kw).
DELTAMAB 600:
Stitch of 8 " with passage Ø 105 mm (3200 rpm - 22/36 kw) equipped according to version tools or production, of a manual chuck Ø 315 mm or of an automatic chuck Ø 280.
|
|
| ... products without technical information |
| |
|
|
