|
|
The MECAPRO product line, with its working areas from 1000 x 1500 mm to 2000 x 6000 mm, offers a very attractive performance / price ratio.
The wide choice of supplier of spindles and functions will meet all requirements regarding the machining of materials with plates in average thickness such as :
plastics, composites, aluminium, wood and by-products.
The heavy MECAPLUS range is designed for the intensive machining of aluminium, composites and plastics in strong thickness.
Dimensions : 1000 x 2000 mm till 6100 x 2100 mm. |
|
CnCut C3 is a mill and engraving machine manufacturer designed to make accurate cutting out of stone for sinks and cooking tops easy. The entire process is run from the integrated PC Windows® control panel. The user-friendly interface in the modern computer makes it possible to draw, change and save thousands of drawings and figures at the machine without any knowledge of CNC-technique.
The machine includes CnCutCam, a user-friendly software to make CNC programs of any industrial sink or cooking top. The unique open gantry combined with a compact space-saving design allows for any size workpiece without having to take into account the system tool envelope. |
|
Electronic :
- Charlyrobot CNR3 micro-step digital control.
- 3 to 5 interpolated electronic axes.
- Communication: serial RS232
- Industrial power supply 240 volts or option 110 volts single phase + earth
- Installed power: 2KW with HF spindle 1.1 KW.
Drive :
- Stepped motor, micro-step management.
- Manufacturers of ball screw diameter 12 mm with a thread of 5 mm on X, Y and Z.
- Professional guides by prismatic rails with ball recirculation professional shoes on X and Y.
- Protection of axes by lip seals on X, Y and Z.
- Greaser on guide shoe and drive ball screw bushing.
Options :
- Microlubrification
- Floating suction sensor in Z, for 2D application only.
- Standard 600 W spindle with speed industrial converter by mecanical potentiometer on the spindle. Rotation of 8000 to 24000 rpm. Maximum tightening diameter of 8 mm.
- High frequency spindle 1.1 KW without tool changer with electronic frequency converter controlled by potentiometer on the front panel. Rotation of 6000 to 24000 rpm, EX20 collet with maximum tightening diameter of 13 mm.
- 4th axis (manufacturers of brushless).
- Bushless servo motors with CNR3 digital control, 3 axes extensible to 5.
- Vaccum table. |
|
Electronic :
- Charlyrobot CNR3 micro-step digital control.
- 3 to 5 interpolated electronic axes.
- Communication: serial RS232
- Switched mode power supply 240 volts or option 110 volts single phase + earth
- Installed power: 2KW with HF suppliers of spindle 1.1 KW.
Drive :
- Stepped motor, micro-step management.
- Ball screw manufacturer diameter 12 mm with a thread of 5 mm on X, Y and Z.
- Professional guides by prismatic rails with ball recirculation industrial shoes on X and Y.
- Protection of axes by lip seals on X, Y and Z.
- Greaser on guide shoe and drive ball screw bushing.
Options :
- Microlubrification
- Floating suction sensor in Z, for 2D application only.
- Standard 600 W spindle with speed industrial converter by mecanical potentiometer suppliers on the spindle. Rotation of 8000 to 24000 rpm. Maximum tightening diameter of 8 mm.
- High frequency spindle 1.1 KW without tool changer with electronic frequency converter controlled by potentiometer on the front panel. Rotation of 6000 to 24000 rpm, EX20 collet with maximum tightening diameter of 13 mm.
Safety :
- Integral cover with 180° vision, very bright.
- Compliant with the European Directive "machine n° 98/37/CE".
- "Punch button" type emergency stop.
- Cover opening detection.
- Electromagnetic cover locking, controlled by the spindle. |
|
K2X The machines of Extremes
Very high speed and very high precision in 3D-machining.
Precursor of the very high HSM range, the structural calculations have lead to a very high-performance machine : feedrates and working speed up to 60 m/mn and acceleration up to 1g ; powerfull suppliers of spindle which allows high swarf removal.
Rapidity and power are the best describing the HURON K2X. It allies swarf removal capacity and high machining speeds for 3D-finishing operations.
Milling centres type K2X have a high stability for machining the hardest materiel (machining in 65 Hrc steel have been made).
This milling centre is ideally suited for pieces up to 3000 kg such as injection moulds, foundry templates, industrial cutting tools, aeronautical pieces, precision mechanical parts.
K2X 8
XYZ 700 / 600 / 450 mm
800 x 600 mm / 500 kg
24.000 rpm - 24 kW - 38 Nm
XYZ = 40 m/min |
|
A modern machine with 5 NC-axes for parts of medium weight up to 6 tons and a working envelope of 2.5 x 2 x 1.2 m erected on an even foundation and featuring performance parameters to meet highest demands in metalworking industry.
The all-around enclosure permits a diameter of rotation of work pieces to be cut of 2200 mm. Chip and coolant discharge facilities are arranged above floor level. Automatic tool and pallet changers sustain universal application of machine as a machining device.
Comprehensive accessories such as various milling heads, NC facing heads and support bearings manufacturers that can also be changed automatically are to enhance the universal application of this UNION machine. |
|
Series GFV/GFY
X/Y/Z CNC Base Units
Series GFV / GFY
Effective travel ranges: from 440 x 480 mm to 1,380 x 2,480 mm, z-axis 220 or 300 mm
Clamping surface: from 625 x 1,100 mm to 1,500 x 3,050 mm
Portal passage: optionally 235 mm or 435 mm
Drive system: DC (series GFV) or AC (series GFY) servo drives, precision ball screw manufacturers spindle
Travel speeds: 8 m/min (series GFV); 12 m/min (series GFY)
Repeatability depending: on the assembly of the plants; on average approx. 0.02 mm
Weight: 450 kg to 650 kg
Example of use
All linear axes of the linear units LES 5 (x- and z-axis) and LES 6 (y-axis) that are use here run on grinded steel shafts with linear ball bearings. Clearance-free ball screw drives with hardened and polished 5/8''-16 manufacturers of spindles with a pitch of, optionally, 2.5/4/5 or 10 mm are used as drives. The linear axes are driven by powerful and robust DC or AC servo motors in easy-to-maintain drive modules.
|
|
|
|
