|
|
| The long cavity length provides an inherent power and wavelength stability advantage over many of today’s CO2 laser solutions. Synrad’s Evolution series, available in 100, 125, 200 and 240 watts, excel in such applications as “Kiss-Cutting” of multi-layer material, semiconductor wafer processing, and thin-film welding. |
|
Synrad’s original “all-metal” tube technology opened the door for sealed CO2 lasers in many industrial applications. After 20 years, it remains the industry standard for performance, reliability, long lifetime and low cost. The laser tube is a rigid box structure design that provides an ultra-stable platform for the laser resonator. Synrad’s
48-series tubes are mounted into an H-shaped heat sink extrusion that also serves as the chassis for the drive electronics. This guarantees that the laser will withstand the harsh requirements of modern industrial environments. |
|
| Maximum power and performance from an air-cooled CO2 laser is the drive behind our firestar t-series technology. Synrad’s firestar t-series lasers are built on technology using a patented hybrid-unstable resonator design. This creates a compact laser with excellent beam quality that can be focused to the smallest achievable spot size, delivering the maximum possible power density on a work surface. The result is faster processing speeds, higher resolution and optimized quality for cutting, marking and engraving applications. |
|
| Based on a waveguide design, Synrad’s v-series resonator technology guarantees a circular beam (typical M2 <1.1) in both the near field and far field. This near-perfect beam can be focused to the smallest achievable spot size, thereby creating the maximum possible power density on a work surface. This results in faster processing speeds and higher resolution for cutting or engraving applications. |
|
| The HLT6000 is currently running reliability tests. It has a rated output power of 6kW and a maximum of 7200W. Due to its long, slim resonator it produces a low-order, high quality beam suitable for sheet and plate cutting. Attached to a high-dynamics machine, it can be used to exploit the advantages of increased processing speed in sheet metal. Alternatively, it can be interfaced to a large-area plate cutting machine. |
|
| The HLT8000 is in a design phase and will be optimised for maximum power. It has a single-layer, larger-bore resonator. It will be suited for high-speed, deep-penetration (keyhole) welding, cladding and laser surface treatment. |
|
| ROFINs well proven high-power CO2 lasers are always a good choice: whether cutting paper or welding gear wheels; the high availability, low service requirements, and excellent beam quality make ROFIN lasers an essential tool in any production environment. |
|
HLT3500 is a high-power, Class IV CO2 laser with a rated output power of 3500W and a maximum of 4kW. The laser radiation has a wavelength of 10.6mm and as such is invisible to the human eye. To facilitate alignment with external mirrors, a visible Class IIIA green laser diode pointer is standard and pre-aligned with the main beam. The visible beam is only present with closed shutter, and hence no accidents can occur since the main beam is always blocked when the pilot beam is visible.
|
|
The HLT4500 is an industrial high power CO2 laser with an output power of 4500W and has integrated the best mode for sheet and plate cutting. Gas consumption is low as 20Nl/h and has a footprint of only 1600x1600x1600mm³. The laser is controlled by a Siemens controller equipped with standard teleservice via internet, is designed for ease of maintenance, the laser is standard delivered with integrated beam shaping optics for matching to the resonator and the application. This laser is the ideal source to be integrated on an excisting or a new laser machine or as stand alone unit for all kind of laser applications.
On top this laser equiped with highest standards for optical and electrical standards is economically low priced and has a world-wide after sales service back-up. |
|
COMPACT CO2
Ultra-compact laser unit CO2 sealed type with vertical exit, equipped with 2 interpolated axis by galvo motion system, suitable for marking, engraving and cutting of most non-metallic materials such as wood, plastic, glass, stone, paper, textiles, leather, etc., easy to install on new or existing machinery or production line.
Laser source made in the USA in compliance with the strictest military standards.
Optical path fully covered, sealed and dust-proof.
Personal computer integrated in the laser box (monitor and keyboard separate) supplied with our Linux RTI MatriX software.
Air cooling system integrated in the laser box or with separate cooling unit, liquid type (with refrigerator) |
|
Coherent offers the broadest product portfolio of sealed carbon-dioxide (CO2 ) lasers in the market. The DIAMOND family of CO2 lasers consists of market proven systems in the power levels between 30W and 500 W. These lasers offer the best power/performance/size ratio in the market at competitive pricing. The DIAMOND family of lasers is all maintenance-free, completely sealed and requires no external gas, making them a robust, highly reliable 'laser engine'. Many customers have relied on the DIAMOND technology for more than 15 years.
Application Need. When there is a need for cutting plastic, fabrics or glass, converting paper, drilling plastic or simply marking or engraving, Coherent offers the best performance at the smallest package. Visit our CO2 Applications page to see the many applications our CO2 lasers serve.
Power Specifications.The DIAMOND family of lasers offers a variety of models from 30W to 500W of average power, up to 1500W (>1,5 kW) of peak power, with output wavelengths in the 10- and 9-micron regions, and operating modes of CW or pulsed. DIAMOND lasers provide the greatest flexibility to both end-users and OEM systems integrators. See the -more- section for additional details. |
|
| ... products without technical information |
| |
|
|
see the results for the following category