|
|
|
Dedicated technical personnel around the world provide support to an extensive product portfolio. These products offer outstanding performance in formulations for the protective and decorative coatings industries. Our products strongly support applications such as wall paints, chemical resistant tank lining, flooring, coating on steel of ship and offshore structures as well as decorative exterior, hybrid systems and functional powders.
|
|
Pipe Coating FBE/3LPE/3LPP/Liquid Epoxy
Outside Diameter: ø 114mm - ø 1626mm (4"-64")
External Coating: FBE/3LPE/3LPP
Specification: CAN/CSA Z245.20:06 / DIN30670, CAN/CSA Z245.21:06, DEP
Capacity: 6km / day (Based on 20" O.D. 3LPE)
Internal Coating: Liquid Epoxy / FBE
Specification: API RP 5L2
Capacity: 2.5km / day (Based on 20" O.D. Liquid Epoxy)
PLEASE WRITE ALL ENQUIRIES IN ENGLISH ONLY! THANKS!
|
|
|
|
|
|
DURESIL EB : Bituminous epoxy paint for acid-resistant protection of concrete and steel surfaces. Use Duresil EB to coat structures that are below ground or to be permantly immersed in water, such as concrete and steel posts, sewers, purification plants etc. Duresil EB is a two-component paint formulated from special asphalt polymers and epoxy resins. To prepare, add Part B to Part A and mix thoroughly. Apply Duresil EB by brush or spray onto perfectly clean and solid substrates. After final hardening, Duresil EB forms a completely waterproof and vapourproof protective coating that is resistant to diluted acids and alkali, mineral oils, detergents, waste water, etc. Consumption 400-450 g/m2 per coat. Packaging 10 kg (A B).
MAPECOAT I24 : Epoxy paint for acid-resistant non-toxic coating of concrete surfaces. Mapecoat I24 is used to coat concrete surfaces designed for contact with food products e.g. wine, oil, confectionery industries, etc. Mapecoat I24 is especially recommended for coating reservoirs built to contain drinking water. Mapecoat I24 is a two-component epoxy paint. Prior to use the components must be thoroughly mixed until complete homogeneity is obtained. Characterized by a low viscosity Mapecoat I24 can be applied easily on perfectly clean, solid and dry substrates by brush, roller or spray. Once cross-linked, Mapecoat I24 forms a non-toxic protective coating that is waterproof and vapourproof. Coverage 400-600 g/m2 per coat depending on the type of substrate.Packaging 5 kg (A B).
|
|
|
|
|
|
Elastomeric Coatings
- Chemical Resistant, Water-Borne, And Solvent-Based Coatings.
Lauren's chemical resistant coatings are solvent based ... water borne ...and will cover your most corrosive environment.
Coatings Designed For The Toughest Applications.
Fluorolast coatings are ideal for a wide variety of applications – especially those that require resistance to acids, bases or salts. Our fluoroelastomer coatings have been around over 15 years, and have a track record that is tried and true.
Fluorolast coatings are ideal for use in many industries … under-the-hood automotive, agriculture, petro and electro-chemical, construction, electric power and electronics, marine, pulp and paper, aerospace, military, and many more.
Fluorolast Coatings Can Be Applied With Ease.
Whether you brush, roll, spray or dip them, Fluorolast coatings will adhere to just about anything – properly prepared metal, concrete, paper, and even flexible substrates such as silicone rubber. And, our water-borne coatings clean up with soap and water.
Fluorolast provides a smooth, seamless finish with excellent abrasion resistance and a low coefficient of friction. The coatings are quick drying and deliver long-lasting protection even in the harshest conditions, and are virtually unaffected by weather or sunlight.
|
|
|
|
|
|
New Evolution™ coatings launched by Ferro Inorganic Specialties take today’s trendy metallic kitchen finishes to a higher level, with performance that maintains beauty to build long-term brand popularity. Unlike stainless steel, Evolution porcelain enamel coatings don’t show noticeable fingerprints or discolor from heat, and are resistant to stains, scratching, and chemical cleaners. In addition to providing a long-lasting, easy-care finish, Evolution coatings offer a cost-effective alternative to stainless steel and copper for manufacturers facing escalating metal prices.
Product differentiation is enhanced with Evolution’s nearly infinite range of custom metallic color possibilities. Evolution coatings are ideal for refrigerators, ranges, cooktops, sinks and plumbing ware. Washing machines may also benefit from Evolution’s stylish appearance as they increasingly move from the basement into living spaces.
Evolution coatings’ durability and resistance to heat, flames, staining, weather and corrosion make them a superior choice for grills compared to stainless steel, which is quickly marred in appearance with actual use. They also can add stylish metallic color possibilities to the exterior surfaces of designer cookware.
Ferro is the world’s leading porcelain enamel producer. Porcelain enamel was the Company's first product line, and Evolution is the latest innovation in the porcelain enamel family of products.
|
|
|
|
|
|
Master Bond Inc. offers a complete line of environmentally friendly conformal coatings that are easy to apply and provide superior protection for printed circuitry. These conformal coatings include very fast, one part, UV curing formulations, one and two part epoxies, one and two part silicones and a unique, cost effective latex system. These electronics coatings can be applied by spraying, dipping, flow coating and other conventional processing techniques. Master Bond Inc. will be glad to recommend specific products for your particular application.
Where rapid cure speeds are of prime importance, we offer one part, UV curable systems. For intricate parts with shadowed-out areas, we also offer special "dual cure" coatings which cure with UV light and with the addition of heat. Grades vary in viscosity, cure speed, flexibility, chemical and temperature resistance, electrical properties, color, etc. Special formulations are non-yellowing, optically clear, cryogenically serviceable, repairable and have exceptional dielectric properties. Ultra low viscosity coatings are available for confined spaces.
For easy application and reliable performance, select Master Bond for your conformal coating needs. Our wide range of compounds will extend the life of your electronic assemblies and provide protection against moisture, abrasion, solvents, and elevated temperatures. They are 100% reactive and contain no solvents or diluents. For over 30 years, manufacturing companies worldwide have depended on Master Bond's job-proven compounds.
|
|
HPA Conformal Coating
Ref: HPA
Resistant to mould growth
May be removed with solvents such as Ultrasolve (ULS)
UV trace for inspection
Excellent dielectric properties and with a wide temperature range
Approved to US MIL-1-46058C
China Military Approval GJB150 and GJB4 (Naval)
For professional use only
Acrylic Protective Lacquer
Ref: APL
Offers excellent adhesion to all substrates
UV trace for inspection
May be removed with solvents such as Ultrasolve (ULS)
Wide temperature range and good dielectric properties
May be soldered through, allowing for repair
For professional use only
|
|
3M™ Dust Control Spray
A paint booth protection product that attracts and traps dust and dirt. Creates a film that helps produce cleaner paint jobs. Liquid, applied with garden type sprayer. Spray applicator also available.
|
|
Technical sprays for surface and corrosion protection
WEICON Aluminium Sprays
Aluminium pigments of a purity of 99.5% offer excellent corrosion prevention for all metal surfaces combined with a high-temperature resistance.
WEICON Brass Spray
WEICON Brass Spray is a genuine brass coating spray. It is used for the protection and visual enhancement of a wide variety of materials.
WEICON Chrome Silver Spray
WEICON Chrome Silver Spray is a high-brilliance, anticorrosive surface coating. The special formulation and highest purity of the metal pigments employed create an extremely high gloss finish.
WEICON Copper Spray
WEICON Copper Spray is a high-quality metal spray with outstanding weathering resistance and excellent adhesion. Used as a protective and decorative coating, it provides an attractive finish for indoor and outdoor applications.
|
|
ACMOS Special coatings for the glass industry
pour moulages et outils (résistant aux hautes températures)
for chutes (heat resistant)
for rotary blowing machines (heat resistant)
|
|
|
JELT COLOR LAQUE paintings are acrylic type solvents paintings. They are conditioned in aerosols and designed for marking, decoration, completion and final improvements. They are applicable on all supports.
|
|
Easyline Edge Airflow Line Marking System
- Easyline Edge ‘traffic grade’ epoxy paint produces highly durable lines
- Suitable for marking factory floors, car parks, stores and warehouses
- Touch-dry in 10 minutes, reducing costly down-time
- Lasts 2.5 times longer than the best competitor* making it the most effective aerosol paint money can buy
- Complies with your legal obligations under The European Council Directive 92/58/EEC
- Available in 8 standard colours and 2 fluorescents
- Safe non-toxic formula
|
|
| ... products without technical information |
| |
OKS 2531
Alu-Metallic
Decorative corrosion protection based on aluminium powder for ferrous metals. For touching up hot-galvanised surfaces. Can be welded through. Fast-drying. Abrasion-resistant. Protects vehicle exhaust systems. Optimal when combined with OKS 2511.
|
|
| ... products without technical information |
| |
|
Dedicated technical personnel around the world provide support to an extensive product portfolio. These products offer outstanding performance in formulations for the protective and decorative coatings industries. Our products strongly support applications such as wall paints, chemical resistant tank lining, flooring, coating on steel of ship and offshore structures as well as decorative exterior, hybrid systems and functional powders.
|
|
Pipe Coating FBE/3LPE/3LPP/Liquid Epoxy
Outside Diameter: ø 114mm - ø 1626mm (4"-64")
External Coating: FBE/3LPE/3LPP
Specification: CAN/CSA Z245.20:06 / DIN30670, CAN/CSA Z245.21:06, DEP
Capacity: 6km / day (Based on 20" O.D. 3LPE)
Internal Coating: Liquid Epoxy / FBE
Specification: API RP 5L2
Capacity: 2.5km / day (Based on 20" O.D. Liquid Epoxy)
PLEASE WRITE ALL ENQUIRIES IN ENGLISH ONLY! THANKS!
|
|
|
|
see the results for the following category : 
