|
|
|
|
|
|
|
The Whale series WME-867-M12 is a highly reliable IP67 Industrial 8-port Managed Ethernet Switch. It has 8 10/100TX M12 ports that support IEEE 802.3/802.3u/802.3x with 10/100M, full/half duplex, and MDI/MDI-X auto-sensing. With its high performance switching device, WME-867-M12 provides redundant self-recovery mechanism in less than 20ms on full load which allows you to establish a redundant Ethernet network to build a back-up ring topology. With powerful network management functions, WME-867-M12 can be remotely configured by Web browser, managed by SNMP and RMON. Event notification can be defined via SNMP trap, Syslog, Relay output or E-mail. Security is enhanced with advanced features like Port based VLAN, Tagged VLAN and IP security. Performance is optimized by Quality of Service and IGMP Snooping/querying. The WME-867-M12 is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Its metal shell robust housing and tightly sealed M12 connectors is specifically designed for vibration-proof & water resistant to secure Industrial Ethernet applications.
|
|
|
Ethernet Direct offers Moose Series Industrial Modbus over TCP Solutions whcih include industrial switches and gateways. In industrial applications, a fault-tolerant Ethernet network protects the system from downtime which will cause a great amount of losses in production. In SCADA applications, it is important that a device can monitor the status of Ethernet and fiber ports with Modbus or OPC protocol. This is the design concept of Moose Industrial Modbus Ethernet Switches. The MRM Managed Modbus Ethernet Switch supports Modbus/TCP protocol to read port status. It comes with extended temperature and conformal coating options. MRM Managed Modbus Ethernet Switch supports Modbus/TCP, Modbus/RTU and OPC protocols to provide majority of applications with seamless process. When these devices are placed into a redundant ring application, its redundant ring technology detects and recovers a fiber or copper link failure in milliseconds.
|
|
KIEN2000
8 Port Unmanaged Industrial Ethernet Switch
KIEN2000 is an 8-port unmanaged industrial Ethernet rail switch. It offers two redundant 100Mbit/s fiber ports and six 10/100Base-T/TX TP ports. With the plug-and-play feature, it can be started up quickly. KIEN2000 offers 24V redundant power inputs.
• 10/100Base-T/TX Ethernet ports, adaptive, full/half duplex, Auto MDI/MDI-X connection
• 100Base-FX fiber ports, single mode/multimode, full duplex
• DT-Ring, high speed redundant ring network (recovery time<100ms)
• Alarm relay output for power.
• Store-and-forward switching mode conforms to IEEE802.3/802.U/802.3X
• EMC industrial level 4, complies with IEC61850 standard.
• Dual redundant 24VDC power supply(DC 18V to 36V).
• Ribbed Aluminum housing for heat dssipation (fanless); Operating at -40 to 75°C(-40 to 167°F)
• IP40 protection class
• Easy DIN-Rail mounting or optional wall-mounting
|
|
|
|
|
|
KIEN1005
5 Port Unmanaged Industrial Ethernet Switch
KIEN1005, DIN-Rail industrial Ethernet switch, is specially designed for industrial applications. It offers five TX ports with adaptive functions, which enable it to configure automatically as 10Base-T or 100Base-TX, full-duplex or half-duplex mode. With the plug-and-play feature, it can be started up quickly.
• 10/100Base-T(X)(RJ45), 100Base-FX(SC, FC or ST connector, single mode / multimode)
• Broadcast storm protection
• Supports IEEE802.3/802.3U/802.3X
• Store and forward switching mode
• 10/100Base-T/TX, full/half duplex, MDI/MDI-X adaptive
• QoS(default high priority) service for the 5th port
• Backplane switching capacity of 1G
• Transmission delay less than 6us
• TVS (Transient Voltage Suppressor) protection of 1KV for Ethernet ports.
• Wide range operating temperature: -40 to 75°C(-40 to 167°F)
• Power input of 12V~36VDC,customization for 110VDC, 220VDC/VAC
• Reverse polarity connection protection for power supply
• IP40 protection class with aluminum casing
• DIN-Rail or Wall-mounting
• EMC industrial level 4, complies with IEC61850 standard.
• DC110V or DC/AC 220V module
• Transmission distance: 60KM、80KM、120KM
• OEM/ODM
|
|
RuggedSwitch™ RS969
IP66/IP67 Rated 10-Port Managed Ethernet
Switch with Gigabit Uplink Ports
RuggedRated™ for Reliability in Harsh Environments
IP67 Rated for protection against immersion in water
IP66 Rated for protection against strong jets of water
Immunity to EMI and heavy electrical surges
Meets IEEE 1613 (electric utility substations)
Exceeds IEC 61850-3 (electric utility substations)
Exceeds IEC 61800-3 (variable speed drive systems)
Exceeds IEC 61000-6-2 (generic industrial)
Exceeds NEMA TS-2 (traffic control equipment)
Hazardous Location Certification: Class 1 Division 2
40°C to +85°C operating temperature (no fans)
Cyber Security Features
Muti-level user passwords
SSH/SSL encryption
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1q) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
|
|
Brad Ethernet Product Overview
Brad automation solutions for Industrial Ethernet include cordsets, receptacles, field attachable connectors, I/O modules, PC interfaces, gateways, switches, diagnostic tools and simulation software. Applications include supervisory HMI messaging, real-time control, bridging networks & devices, physical connections in harsh environments and I/O communications.
Ethernet protocols currently supported include:
Altus - Alnet II (AL 200x, Webgate)
Alstom - SRTP (C80-35, C80-75)
Allen-Bradley - EtherNet/IP (Logix, PLC-5 and SLC 500)
GE Fanuc - SRTP (90-30, 90-70)
Mitsubishi - Melsec (A, Q)
Omron - FINS (C, CV, CS)
PROFINET
Schneider - Open Modbus TCP and UNI-TE (Premium & Micro)
Schneider - Ethway
Siemens - Industrial Ethernet ISO (S5, S7, TF and TI)
Siemens - Industrial Ethernet (S5, S7, TI)
UDP Send / Receive (Free messaging)
Development toolkit for TCP/IP protocols
|
|
|
|
|
|
Introduction
The EDS-510A is a 10-port managed Ethernet switch that provides 3 fiber/copper Gigabit ports in a compact design. It is an ideal solution for communication demanding applications such as process control, shipbuilding, ITS, and DCS systems, which can benefit from a scalable backbone construction. In addition, the EDS-510A is the first IPv6-ready industrial managed Ethernet switch for industrial automation and control applications, making it a future-proof choice for next-generation industrial Ethernet networks.
The EDS-510A models are available with RJ45 or SFP connectors for Gigabit Ethernet operation to meet highly demanding communication requirements. With 3 Gigabit ports, the EDS-510A can be used to build a Gigabit Turbo Ring backbone while still retaining a spare Gigabit port for uplink. All models support QoS, IGMP snooping/GMRP, VLAN, Port Trunking, SNMP V1/V2c/V3, IEEE 802.1X, and https/SSL. Wide temperature models are available that support -40 to 75°C operation, for enhanced reliability in industrial applications.
Features
• IPv6 Ready logo awarded (IPv6 Logo Committee certified)
• 2 Gigabit ports for redundant ring and 1 Gigabit port for uplink
• Redundant ring fault recovery speed under 20 ms
• QoS, IGMP snooping/GMRP, VLAN, LACP, SNMP V1/V2c/V3, RMON, IEEE 802.1X, HTTPS, and SSH supported
• IEEE 1588 PTP for precise time synchronization of networks (Q3 available soon)
• Modbus/TCP industrial Ethernet protocol supported (Q3 available soon)
• -40 to 75°C operating temperature range (T models)
|
|
Korenix JetCard 2105/2205 Ethernet Switch Cards are flexible and high performance Universal PCI/PCI-104 cards, equipping IPC devices with various Ethernet management features. The easy-to-install drivers that come with JetCard allow users to easily set up specific complex systems. Combined with 1.5KV Hi-pot isolation protection and overload current/voltage protection, JetCard 2000 series are the best choice for a reliable and cost-effective embedded networking solution in severe industrial environments.
* Support 32 bit PCI/Universal PCI bus
* 5 ports RJ45 Ethernet Switch
* IEEE 802.3 10 Base-T and 100 Base-Tx compatible
* Full or half duplex at 10/100 Mbps
* IEEE 802.3u Auto-Negotiation supported
* IEEE 802.1Q VLAN supported
* QoS supported
* 1.5KV Hi-pot isolation protection
* -25~70oC operating temperature for hazardous environment
application ( JetCard 2105-w/JetCard 2205-w: -40~80oC)
|
|
The JetCon 3401G, the industrial Gigabit Ethernet media converter, is equipped with a rugged aluminum alloy case with IP-31 grade ingress protection against
damages of solid objects or dust. With the excellent characteristics of heat dissipation, JetCon 3401G is capable to perform better than ordinary Gigabit Ethernet media converters which are enclosure by steel metal with various of heat dissipation holes.
Unlike those with a single power input, the real time redundant power backup on JetCon 3401G leads to the functionality of a real Industrial Gigabit Ethernet Media Converter with the non-stop transmission.
*Converts 10/100/1000TX to Gigabit Fiber
*Flexible SFP Fiber transceiver design
*Auto Fault Detection and Alarm
*Fault Alert for port and power
*Two way Link loss forwarding
*Power redundancy with wide range input
*IP-31 grade protection with wide range operating temperature
*1.5KV Hi-Pot testing passed
|
|
KOM300
Industrial Ethernet to Fiber Media Converter
KOM300 is an industrial fiber optic convertor which can work in harsh electromagnetic environment within a wide range of temperature.
- Operating temperature: -40 to 75°C(-40 to 167°F)
- 2×10/100Base-T/TX, RJ45 socket
- 1-core single mode fiber
- Broadcasting storm control
- MAC Address Table Size: 1K, buffer cache: 1M
- IP30 protection class
- DIN-Rail mounting or rack-mounting
- FCC/CE/UL/ROHS
|
|
|
The optical fiber switches from LEONI are based on a patented unique microoptical/ micromechanical solution. Due to a unique combination of refractive microoptical components and robust, industrial proven actuators LEONI´s switches are characterized by excellent optical parameters and short switching time. For the user this guaranties excellent parameters, high flexibility and long term stability. The switches are available for several broad spectral regions, starting from the whole visible and covering the telecom infrared spectrum. They can be built with various fiber types, PM fibers for the eol series included.
|
|
|
|
|
|
Piezoelectric actuators can be used to move microoptical components, such as optical fibers and microprisms of these components. This application is not only for laboratory adjustment of these components, but also for the creation of special products in the field of optical communication, optical
data storage and metrology.
On the base of the combination of piezoelectric actuators with different microoptical components piezosystem jena has already developed a broad spectrum of systems for different applications:
1 x N switches for singlemode fibers for optical communication, data storage, optical measurements
1 x N switches for multimode fibers for optical measurements (especially spectroscopy) and multi-point sensor systems
Variable optical attenuators for optical communication
Custom made solutions
Piezoelectrically driven switches and modulators have several inherent advantages compared to other electromechanically driven systems:
High switching speed - down to submillisecond region
Compactness and stability, low power consumption
Excellent optical parameters
The best way for the switching optical fibers is the direct movement of the optical fibers with respect to each other. Piezoelectric actuators are ideal candidates for this purpose due to their typical movement ranges and actuation speed. In order to exclude the influences of hysteresis and creep on the accuracy of such a switch, the actuator end positions can be fixed by special stopping configurations.
In the case of multimode fibers, the required accuracy (10 microns or more depending on the fiber core diameter) can be achieved by different approaches of precision engineering. For singlemode fibers, however, this approach is not very appropriate.
|
|
Optical Switching Modules
• Comprehensive Range of Optical Multiplexers and Insert/Bypass Switches
• MEMS Switching Technology Offers High Reliability and Fast Operating Speed
• Single and Multi Mode Versions
• FC/APC. FC/PC. SC/PC, MU (mini SC) or LC Connectors (Single Mode Versions)
• SC or ST Connectors (Multl Mode Versions)
• Kernel, VISA and IV! Support For PXI Environments
• Kernel and IVI Support For LXI Environments
• Complies with PXI and CompactPCI Specifications
|
|
SICOM2024
24 Port Managed Industrial Ethernet Switch
SICOM2024 is a effectively-performaning network-managed industrial Ethernet switch specially designed by KYLAND for industrial applications. Its efficient switch engine, solid and sealed case design, single-rib heat dispersion shell (no fans), overcurrent, overvoltage and EMC protection at power input side, and excellent EMC protection of RJ45 port together make SICOM2024 applicable in harsh and dangerous industrial environments. The redundant function of optical fiber network, independent entire network management channel, redundant power input function, and powerful entire network real-time management system provide multiplex guarantees for the reliable operation of the system. SICOM2024 supports Kyvision 3.0 software concentrative management.
|
|
|
|
|
|
RuggedSwitch™ i802
Compact Managed Industrial Ethernet Switch
with Fiber Optics
Ethernet Ports
6x 10/100Tx + 1x 100FX or 2x 100FX or
2x 1000LX or 2x 10/100/1000Tx
Industry standard LC fiber optical connectors
Multimode and Singlemode optical transceivers
Cyber Security Features
Multi-level user passwords
SSH/SSL encryption
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
RuggedRated™ for Reliability in Harsh Environments
Immunity to EMI and heavy electrical surges
Exceeds IEC 61000-6-2 (generic industrial)
Hazardous Location Certification: Class 1 Division 2
-20 to +60°C operating temperature (optional -40 to +85°C)
Conformal coated printed circuit boards (optional)
Die cast aluminum enclosure
Rugged Operating System (ROS™) Features
Simple plug and play operation - automatic learning,
negotiation, and crossover detection
RSTP (802.1w) and Enhanced Rapid Spanning
Tree (eRSTP™) network fault recovery (<5ms)
Quality of Service (802.1p) for real-time traffic
VLAN (802.1q) with double tagging and GVRP support
Link aggregation (802.3ad)
IGMP Snooping for multicast filtering
Port Rate Limiting and Broadcast Storm Limiting
Port configuration, status, statistics, mirroring, security
Industrial automation features (eg. Modbus)
|
|
RuggedSwitch™ RS900G
10-Port Managed Ethernet Switch
with Gigabit Uplink Ports
Ethernet Ports :
2 - Fiber Optical Gigabit Ethernet Ports (1000BaseX)
8 - Fast Ethernet Ports (10/100BaseTX)
Multiple fiber connector types (LC, SC, SFP
Pluggable Optics)
Bi-directional singlestrand fiber support
Long haul optics allow Gigabit distances up to 70km
Cyber Security Features :
Muti-level user passwords
SSH/SSL encryption
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
|
|
Robust 5-Port Managed Gigabit Ethernet Switch Boards
* Universal copper and fiber optic solution
* SFP Module for various fiber optic interfaces
* Simple and comfortable Web Interface
* Stand alone or PC/104, PC/104-Plus operation
* Lowest power consumption - fanless
* Optional for -40°C to +85°C
* Long term available
|
|
|
|
|
|
HMG-628G is a highly reliable and fault-tolerant Industrial 8-port Full Gigabit Managed Ethernet Switch. It supports state of the art design
with six 10/100/1000T Ethernet ports and two small form pluggable (SFP) ports that supports Gigabit SX or LX depending on your existing network structure. Its main features as below:
*Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3X, IEEE 802.1p, IEEE 802.1q, IEEE 802.1d, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3z
*Provides 6 x 10/100/1000Base-TX Ethernet ports with RJ-45 connector
*Provides 2 Mini-GBIC socket
*RJ-45 Port support auto MDI/MDI-X crossover
*Provides broadcast storm protection
*Redundant X-Ring recovery time < 10 ms on full load
*Supports Dual Homing - RSTP over X-ring
*Supports Ring coupling
*SNMP for network management
*IGMP snooping for filtering multicast traffic
*QoS/ToS to increase network packet determinism
*VLAN for easy network planning
*Event notification by e-mail, SNMP trap, Syslog & Relay output
*Online Port Mirroring for online debugging
*IP security to define access levels for protection
*Configurable by WEB browser
*IntraVUE Network Management software compatible
*Robust Aluminum case complying to IP-30 housing standard
*Supports operating temperature -10 to 60 degree C
*DIN-Rail, panel mount or desktop installation
*Wide range redundant power design
*Equipped with redundant power inputs
*Supports 24 to 48VDC redundant power with polarity reverse protection
*Terminal block present for master and slave power
|
|
|
|
|
|
JetNet 5018G is an Intelligent High Power Density Gigabit Ethernet Switch specifically designed for large network applications requiring high-port density and secure connection. Equipped with 16 Fast Ethernet ports and 2 Gigabit SFP combo ports, the switch is capable of aggregating up to 8 fast Ethernet and 1 Gigabit fiber/copper rings while ensuring the network reliability for various distance applications.
Key features of JetNet 5018G are:
* 16 10/100-TX ports and 2 Gigabit SFP/RJ45 combo ports
* 2 Gigabits maximum uplink bandwidth for hundreds of megapixel video streams
* Flexible Fiber transmission up to 70KM, or 60KM BIDI by SFP transceivers
* Non-Blocking Switching with 12.8G high backplane single chip for high-quality video transmission
* QoS video precedence transmission
* Optimized IGMP Query, snooping for one-to-many video transmission
* VLAN traffic isolation, up to 255 VLAN groups for scalable network configuration
* MSR redundant surveillance network, failure recovery time up to 5ms
* Exclusive Multi-Ring Design, support up to 8 Fast Ethernet Rapid Super Rings and 1 Gigabit Ring to form non-stopping video network redundancy
* IEEE 1588 Precision Time Protocol for Precise Time Synchronization
* LLDP and optional JetView Pro, auto-topology visualization management software for efficient surveillance network
* Advanced network management features support SNMP v1/v2/v3c, RMON
* Attached IP camera loss alarm through digital output, e-mail, and SNMP trap
* Redundant power inputs 12~48VDC
* IP31 rugged aluminum case with wide operating temperature -25~70oC
|
|
SICOM3024
24+4G Port Managed Industrial Ethernet Switch
SICOM3024 is a network-managed industrial Ethernet switch specially designed by KYLAND for industrial applications. Its efficient switch engine, solid and closed case design, single-rib heat dispersion shell(no fans), overcurrent, overvoltage and EMC protection at power input side, and excellent EMC protection of RJ45 port make SICOM3024 applicable in harsh and dangerous industrial environments. The redundant function of optical fiber network, independent entire network management channel, redundant power input function, and powerful entire network real-time management system together provide multiplex guarantees for the reliable operation of the system.
|
|
SICOM3000 Series
8+2G Port Gigabit Managed Industrial Ethernet Switch
The SICOM3000 series, Gigabit managed DIN-Rail industrial Ethernet switch, was developed by Kyland for industrial information transportation in transportation, power and mining industries. It offers 2 Gigabit fiber/TP ports, 2 100M fiber ports and six 100M TP ports. Its single-rib heat dispersion shell(no fans) and the ability of working under a wide range of temperature ensure its reliability in extreme industrial environments. Based on Kyvision3.0, CLI, and WEB interface, it offers concentrative management. The state-of-the-art OPC software enables the switch’s management to be embedded in various industrial systems.
|
|
SICOM6000
24+4G Port Modular Layer3 Managed Industrial Ethernet Switch
SICOM6000 series is layer-3 Gigabit modular DIN-Rail industrial Ethernet switch. It offers 4 Gigabit fiber/TP ports, 24 10/100M fiber/TP ports, 10 slots for 16 types of modules. It complies with IEEE802.3, IEEE802.3U, IEEE802.3X, IEEE802.1Q, IEEE802.1P, IEEE802.1D, IEEE802.1W, IEEE802.1S. Meanwhile, it supports static routing protocol, dynamic routing protocols such as RIP v1/v2, OSPFv2, BEIGRP, and multicasting routing protocols such as BGPv4 and PIM-SM, PIM-DM and DVMRP. SICOM6000 also complies with EMS industrial level 4 and IP40 protection class. Based on Kyvision3.0, CLI, and WEB interface, it offers concentrated management. The state-of-the-art OPC software enables the switch’s management to be sucessfully applied in various industrial systems.
|
|
SICOM6224 and SICOM6424
24+2G/4G Port Layer3 Managed Industrial Ethernet Switch
SICOM6224 and SICOM6424 are layer-3 managed industrial Ethernet switches with 24 10/100Base-TX ports and 2/4 Gigabit TP/fiber ports with SFP modules. With layer-3 wire speed switching function, they can support static/dynamic routing to optimize the network. They provide excellent services and reliable solutions for industrial projects, which are definitely your best choice.
|
|
|
|
|
|
SICOM3024P
24+4G Port Managed Industrial Ethernet Switch
SICOM3024P is an industrially strengthened, fully managed Ethernet switch specifically designed to operate stably in electrically harsh and climatically demanding utility substation and industrial environments. SICOM3024P has passed KEMA authentication. Its high-performance switch engine, solid and sealed case design, highly efficient single-rib heat dispersion shell without fans, 19" rack-mount mounting options, overcurrent, overvoltage and EMC protection at power input side, and excellent EMC protection of RJ45 port makes SICOM3024P applicable in harsh and dangerous industrial environments. The redundant function of optical fiber network, independent entire network management channel, redundant power input function, and entire network real-time management system provides multiplex guarantees for reliable operation of the system. The SICOM3024P offers 100BaseFX/1000BaseX fiber and 10/100/1000BaseTX copper port combinations. SICOM3024P is highly versatile for any application and can support multiple fiber connectors (ST, FC, LC, SC) without loss of port density.SICOM3024P support Kyvision 3.0 software concentrative management.
|
|
|
|
|
|
The RuggedSwitch RSG2200 is an industrially hardened, fully managed, modular Gigabit Ethernet switch specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. The RSG2200%u2019s superior ruggedized hardware design coupled with the embedded Rugged Operating System (ROS%u2122), provides improved system reliability, and advanced cyber security and networking features making it ideal for creating mission-critical, Gigabit networks or aggregating switches into a Gigabit backbone.
The RSG2200's modular flexibility offers 1000BaseX fiber and 10/100/1000BaseTX copper port combinations. Support for front or rear mount connectors coupled with support for multiple fiber connector types (SFP,GBIC, LC, SC) without loss of port density makes the RSG2200 highly versatile and suitable for any application. The RSG2200 is packaged in a rugged galvanized steel enclosure with industrial grade DIN, panel, or 19" rackmount mounting options.
--------------------------------------------------------------------------------
Ethernet Ports
up to 9-Gigabit Ethernet ports - copper and/or fiber
2 port modules for tremendous flexibility
Supports many types of fiber (Multimode, singlemode, directional single strand)
Non-blocking, store and forward switching
Long haul optics allow Gigabit distances up to 70km
Multiple connector types (LC, SC, SFP, GBIC)
|
|
|
|
|
|
Introduction
Moxa's EDS-G509 full Gigabit Ethernet switches support up to 9 Gigabit ports with 5 fiber optic ports. Moxa's EDS-G509 provides maximum performance through every Gigabit port, and is ideal for upgrading an existing network to Gigabit speeds or building a new full Gigabit backbone. Top network performance, security, and reliability are also assured through the EDS-G509's advanced management features, which include QoS, IGMP snooping/GMRP, VLAN, LACP, SNMP V1/V2c/V3, and RMON.
The EDS-G509 provides long distance transmission through its versatile fiber ports. The versatility comes from the ability to deploy 5 combo ports and 4 fixed TX ports. The EDS-G509 series is designed for harsh industrial environments, and performs flawlessly in wide temperature extremes ranging from -40 to 75°C, supports 12/24/48 VDC or 24 VAC redundant dual power inputs, and complies with Class I Division 2 and DNV certifications, making the switch ideal for any tough industrial application.
Features
• IPv6 Ready logo awarded (IPv6 Logo Committee certified)
• 4 10/100/1000BaseT(X) ports plus 5 combo (10/100/1000BaseT(X) or 100/1000BaseSFP slot) Gigabit ports
• Fiber optic options for extending distance and electrical noise immunity
• Turbo Ring, RSTP/STP (IEEE 802.1w/D) for Ethernet redundancy
• QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON supported
• IEEE 802.1X, HTTPS, and SSH to enhance network security
• IEEE 1588 PTP for precise time synchronization of networks (Q3 available soon)
• Modbus/TCP industrial Ethernet protocol supported (Q3 available soon)
• -40 to 75°C operating temperature range (T models)
|
|
|
|
|
|
Featuring 1000Mbps speeds, Power over Ethernet and wide temperature
Features
Gigabit Speeds (400 and 600 series)
PoE (EIRP series)
Rugged IP30 DIN/Panel Mount Metal Case
Dual Power Inputs with Alarm Output
Wide Temperature Rating on - T models
Gigabit
B&B Electronics' line of unmanaged (EIR400 series) and managed (EIR600 series) Ethernet switches address applications requiring Gigabit (1000Base) Ethernet. All of these switches are DIN or panel mountable and accommodate two power inputs along with an Alarm Relay Output. The - T models are wide temperature rated at -40 to 75ºC. For added flexibility and future expansion options, many models support a dual function port, where the copper Ethernet and SFP ports are shared. The wide range power input on these models makes each switch suitable for a variety of applications.
PoE (IEEE 802.3af)-EIRP models only
Power is transmitted over the Ethernet cable along with the data lines. Each PoE switch has a set of ports that is classified as power source equipment (PSE). These ports can be used to power IEEE 802.3af compliant powered devices (PD), eliminating the need for a separate power line to be run to each end device. A whole new set of applications become feasible with PoE switches due to reduced installation costs through ease of setup and the ability to remotely power end devices. The PoE ports on these switches follow Alternative A standards and are limited to 15.4 Watts of power output per port. These switches require a 48VDC power supply.
|
|
|
|
|
|
JetNet 4706, an improved and strengthen manageable industrial PoE switch, it is designed for industrial PoE applications such as IP surveillance or wireless access points. It supports intelligent PoE control and schedule management; each of the four PoE ports can be configured in a weekly schedule by hourly basis and PoE on/off can be remote controlled via SNMP and Web. JetNet 4706 is compliant to both IEEE 802.3af PoE as well as the pioneer standard of IEEE802.3at PoE Plus design for boosting PoE delivery up to 30W in each of the four PoE ports. JetNet 4706 can auto-detect 24V & 48V power input and deliver 24V & 48V PoE output allows more applications where 48VDC is not an option.
*Four 10/100 TX Power over Ethernet ports and two redundant
10/100 TX uplink ports
*DC 24V Power Input for DC 22V output through Ethernet
(Non-standard PoE)
*DC 48V Power Input for IEEE 802.3af 48V PoE output (IEEE 802.3af)
*Up to 30W per port for High Power solution by Power Input DC 55V
(IEEE 802.3at)
*UP to 100W for total power budget
*Support IEEE 802.3af for PoE detection and PoE classification resistors
*PoE control and schedule by hour/weekly basis
*Auto-detect Powered Device status for device auto-reset (LPLD)
*Patented Rapid Super Ring technology (RSR), back up system recovery time less than 5ms
*SNMP v1/v2c/v3, IGMP snooping v1/v2/v3, RMON, LACP, VLAN, QoS
*Network security by IP/MAC address, SSL and SSH
*Built-in hardware watchdog timer for system auto-reset
*Aluminum rugged enclosure with IP-31 grade protection
*Forced mode Powering
*Wide operation temperature: -25~60oC
Also we have Industrial 6-port Web-Managed PoE Plus Switch JetNet 3706
|
|
|
|
|
|
|
The Cobra series CME-822E is a highly reliable and fault-tolerant Industrial 10-port Managed Power over Ethernet Switch. It supports eight PoE injector ports classified as power source equipment (PSE). CME-822E offers state of the art design with eight 10/100 Mbps Ethernet ports and two small form pluggable (SFP) ports that supports Gigabit SX or LC depending on your existing network structure. The innovative SFP fiber slot design provides user the flexibility to insert different fiber modules, either multi-mode or single-mode at various distances, whether you require typical 10km or overhaul 40 km, 80 km and 120 km distances. With its high performance switching device, CME-822E provides redundant self-recovery mechanism in less than 10ms on full load which allows you to establish a redundant Ethernet network to build a back-up ring topology. Dual homing and Ring coupling are supported to add reliability by allowing a device to be connected to be network by way of two independent connection points. CME-822E offers powerful network management functions including SNMP, SMTP, SNTP, Quality of Service, Class of Service, IGMP, Snooping, LACP, DHCP, VLAN, RMON, Port Trunk, Port Mirror, User Authentication (Radius) and IP Security. The CME-822E is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Its IP-30 housing protection, wide operating temperature of -40 to 80 and DIN-Rail mounting is suitable for an industrial environment. The CME-822E is a plug-and-play solution for your Power over Ethernet applications.
|
|
JetNet 3705-24V is an Industrial 5-port PoE switch, designed to fulfill the specific needs of transportation system networks. JetNet 3705-24V integrates Korenix patented 24V vehicle PoE technology – the 24V to 48V power booster for making the deployment of standard PoE IP cameras feasible on buses, railcars, ships, harbors, etc.
Combined with rugged fan-less design, including vibration resistance and -40~60℃ wide operating temperature, JetNet 3705-24V overcomes the harsh conditions and ensures network reliability on all types of public moving vehicles.
Key features of JetNet 3705-24V are:
* 5 Ports 10/100 TX Industrial Switch with 4 PoE Injectors
* Korenix Patented Built-in DC 24 to 48V Booster for rail, bus, transit transportation
* Embedded 4-port IEEE 802.3af PoE, delivering 15.4W per port
* -40~60℃ wide operating temperature for hazardous environment
* Redundant 24/48 VDC power inputs with overload current protection
|
|
|
|
