|
|
|
|
|
|
The RuggedSwitch® RSG2100P is an industrially hardened, Power Over Ethernet (PoE) enabled, fully managed, modular, Ethernet switch specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. The RSG2100P's superior ruggedized hardware design coupled with the RuggedSwitch™ Operating System (ROS) provides improved system reliability and advanced networking features making it ideally suited for creating Ethernet networks for
mission-critical, real-time, control applications.
The RSG2100P comes standard with 4 10/100BaseTX 802.3af (PoE) compliant Ethernet ports and offers modular flexibility of up to
15 additional Ethernet ports including 10BaseFL /100BaseFX/ 1000BaseX fiber and 10/100/ 1000BaseTX copper port combinations. The RSG2100P is highly versatile and can support multiple fiber types and connectors (ST, MTRJ, LC, SC) without loss of port density.
The RSG2100P is an ideal solution to power and connect several Ethernet devices (such as IP phones, video cameras, and wireless access points) where AC power is not available or cost-prohibitive to provide locally.
|
|
|
|
|
|
Introduction
Moxa's EDS-P510 is a 10-port industrial Gigabit managed Ethernet switch with PoE capability that can power PoE devices over Ethernet in any difficult-to-reach outdoor and harsh locations. The EDS-P510 has four PoE ports to deliver 48 VDC at up to 15.4 watts and 10/100 Mb data transmission per port. Up to three Gigabit SFP/TP combo ports can be used to form a redundant Gigabit ring backbone with ultra fast failover using Turbo Ring technology and Gigabit uplink to the core switches or control centers.
The EDS-P510 supports automatic detection and protection when 802.3af-compliant devices are not attached, fast fault recovery for powered devices, and a power limit control mechanism to save unnecessary power consumption. Furthermore, an hourly/weekly scheduling mechanism is equipped to fulfill economic power consumption and application-specific needs.
Features
• IPv6 Ready logo awarded (IPv6 Logo Committee certified)
• 4 10/100Mb PoE ports to power IEEE 802.3af compliant devices
• Up to 15.4 watts at 48 VDC per PoE port
• 3 SFP/TP Gigabit combo ports
• Turbo Ring (recovery < 20 ms) for Ethernet redundancy
• QoS, IGMP snooping and GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH supported
• IEEE 1588 PTP for precise time synchronization of networks (Q3 available soon)
• Modbus/TCP industrial Ethernet protocol supported (Q3 available soon)
• -40 to 75°C operating temperature range (T models)
|
|
|
|
|
|
Moxa's EDS-G308 series is a full Gigabit unmanaged switch with 8 Gigabit Ethernet ports and up to 2 fiber optic ports, which make them perfect for upgrading an existing Fast Ethernet network or connecting multiple Gigabit-enabled devices in industrial applications. Robust performance and reliability are achieved through redundant wide-range power inputs (12/24/48 VDC), a -40 to 75ºC operating temperature range (T models), alert functions for power or port failure, broadcast storm protection, an IP30-rated metal housing, and a solid 5-year warranty.
With the EDS-G308, users can establish cost-effective and powerful 1000 Mbps connections that can instantaneously transmit a large amount of data across a network. In addition, their fiber option allows the mixing and matching of various media options to offer greater flexibility.
Features:
•Gigabit speeds on every port
•Maximum cost-effectiveness
•Configurable 10/100/1000-TX and/or 100/1000-FX
•Redundant dual 12/24/48 VDC power inputs
•-40 to 75ºC operating temperature range (T models)
•Relay output warning and broadcast storm protection
|
|
|
|
|
|
Moxa's EDS-608 series is a cost-effective compact modular managed switch that allow users to install up to 8 fast Ethernet ports through various 4-port copper and/or fiber interface modules to create tailored switch solutions that best suit your automation network.
Advanced Proprietary Turbo Ring™ and Turbo Chain™ technology (with fault recovery under 20 ms) and RSTP/STP (IEEE 802.1w/D) increases the reliability and availability of your industrial Ethernet network. Several reliable and intelligent functions such as IEEE 1588 PTP, Modbus/TCP, LLDP, DHCP Option 82, SNMP Inform, QoS, IGMP snooping, VLAN, IEEE 802.1X, HTTPS, SSH, and SNMPv3 are supported to make the EDS-608 series suitable for mission-critical industrial applications.
With its compact yet rugged industrial design, the EDS-608 rugged switch series is an excellent choice for solutions that require long-lasting reliability, wide operating temperatures of -40 to 75˚C, and long-haul fiber connectivity. In addition, the switch’s compact size allows users to conserve valuable space, making the EDS-608 ideal for space-critical applications.
Features:
•Compact and space-efficient design
•Modular form factor with a rich selection of 4-port copper/fiber combination modules
•Turbo Chain™, Turbo Ring™, and RSTP/STP for network redundancy
•Complete management and security features
•-40 to 75˚C operating temperature range
|
|
|
|
|
|
JetNet 5628G is an Industrial Modular Managed Ethernet Switch, equipped with 3 modular slots for maximum 24 10/100 Base-TX Ports or 18 100Base-FX Fiber interfaces ports plus 4 Gigabit RJ45 / MINI GBIC combo ports.
JetNet 5628G, designed for substation automation and industrial control rooms, meets the IEC61850-3, IEEE1613 environmental certifications. Dual high power, 85-264VAC/VDC and 18-48VDC power input are flexible for field power constructions.
• 3 modular slots design enables adding up to 24 10/100-TX or 18 100Base-FX
• 4 On-Board Gigabit RJ-45/SFP combo ports support 10/100/1000 Base-TX, 1000 Base-X SFP
• 12.8G Non-Blocking Switching Performance and up to 16K MAC Address table
• Compliant with IEC61850-3, IEEE1613 Power Substation Standards
• Supports Jumbo Frame up to 9,216 bytes
• Korenix Multiple Super Ring (Rapid Dual Homing, MultiRing, TrunkRing, RSR, SR) and RSTP
• Supports 255 VLANs, 8 QoS priority and IGMP snooping
• Supports Link Layer Discovery Protocol (LLDP), SNMPv3, DHCP Server/Option 82 and JetView Discovering and Management
• Advanced Security by 802.1x and Access Control List
• Supports high voltage AC/DC input, 18-48VDC power input
|
|
|
|
|
|
24-Port Gigabit Stackable Layer 3 Managed Ethernet Switch
* 24-port 10/100/1000 BaseT ports with 4 Gigabit SFP combo ports
* 2 10-G stacking CX4 connectors, up to 8 units stackable
* Support IP, VLAN & Multicast routing
* IP Routing protocol supports RIP v1 / v2, OSPF v1/v2
* Support L3 Multicast, PIM-DM and PIM-SM, DVMRP , IGMP v1/v2/v3
* Virtual Redundant Router Protocol (VRRP)
* 802.1s Multiple Spanning Tree Protocol and 802.1w RSTP
* Support 512 VLANs, GVRP/GMRP, protocol VLAN
* 802.3ad LACP, up to 6 trunk groups, unicast and multicast load balance
* Support L2 / L3 / L4 ACL (access control list)
* IEEE 802.1x Port-Based Authentication, RADIUS and TACACS client, SSH, SSL, TLS, Port binding
JetNet 6524G, the 19-inch 24 ports Gigabit Stackable Layer 3 Managed Ethernet Switch, is equipped with 24 10/100/1000 Base-TX, 4 optional Gigabit SFP combo to the last 4 ports and it supports 2 10Gigabit CX4 Connector. With the installation of stacking cable, up to 8 units can be stacked together, and the backplane of the stacked JetNet 6524Gs is 40G. JetNet 6524G supports up to 192 Gigabit ports and 384G bandwidth.
|
|
|
|
|
|
Introduction
Moxa's IKS-6726 is the industrial-grade rackmount Ethernet switches, which are specially designed to run demanding industrial harsh environment. The IKS-6726 series meets a variety of industry standards, including NEMA TS2 for road traffic, EN50155 and EN50121-4 for rail traffic, UL60950-1 for safety, and DNV/GL for marine and offshore use. These approvals guarantee high adaptability to any severe condition, such as vibration and shock, humidity, extreme temperatures, and EMI/EMC noise. A high degree of industrial reliability is ensured by its totally fan-less design and a wide operating temperature range.
Redundancy is a key factor in achieving high network availability. The proven IKS-6726 establishes network redundancy through Moxa Turbo Ring (recovery time<20ms) and redundant power inputs. Perfectly housed in a modular, industrial-grade chassis, the IKS-6726 can be expanded with various media modules, such as RJ45, fiber and SFP ports, for flexible applications.
Features
• -40 to 75°C operating temperature range
• Turbo Ring and RSTP/STP for Ethernet redundancy
• Isolated redundant power inputs with universal 24/48 VDC or 110/220 VDC/VAC power supplies
• Various media modules offered: RJ45, fiber and SFP ports
|
|
MSW-ABOARD
Rugged heavy duty 8-port Ethernet managed switch for automotive or outdoor applications
• Heavy duty aluminum enclosure, IP66 seal rating, shockproof & vibration proof
• 8-port Ethernet managed switch (layer 2), store-and-forward technology
• Auto sensing 10/100BaseTX, duplex and MDIX
• Web based configuration, SNMP administration
• Configurable alarm contact
• Redundant isolated power supply input (+9VDC to +75VDC)
• Rugged M12 connectors for Ethernet & power supplies
• Extended temperature range from -40°C to +70°C (-40°F to 158°F)
• C-Key” for quick configuration Save & Restore
|
|
|
|
|
|
The JetNet 4506-RJ 10/100 Base-TX IP67 Ethernet switch, is specifically designed for the toughest industrial environments. In combination with its IP67 design and the superb management functionality, the JetNet 4506-RJ extends your managing boundaries where no other industrial Ethernet switch can go!
JetNet 4506-RJ is constructed of a rugged weather tight aluminum case and designed with six IP67 rated RJ45 Ethernet ports, which provide a waterproof, and dust-tight connection.
For maximum performance, each switch includes the next generation of redundancy protocol, Rapid Super Ring. This feature allows for the configuration of any two ports for extra protection against link failure and
data loss due to constant vibration and heavy shock. The JetNet 4506-RJ also includes other management features, such as port-based VLAN, QoS, IGMP snooping, SNMP and DHCP, for traffic isolation, deterministic transmission and network management.
The JetNet 4506-RJ can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor, offshore, railway, moving vehicles, coal mines, petrochemical factories, food/beverage industries and plant floors.
Also we have IP68 Ethernet switch pls go to http://www.korenix.com/JetRock_Series_IP67_M12-Ethernet-switch-selection-guide.htm
|
|
|
|
|
|
The JetNet 3706-RJ, an IP67 industrial PoE switch, is specifically designed for the toughest industrial environments. JetNet 3706-RJ is constructed of a rugged weather tight aluminum case and six IP67 rated RJ45 ports to provide a waterproof and dust-tight connection and ensure highly reliable data transmission despite vibration and shock in heavy industrial applications.
Equipped with 4 PoE ports, JetNet3706-RJ extends power deployments to the most inaccessible areas while reducing construction, maintenance time and overall costs.
Due to its outstanding mechanical design and capability of operating in -40-70oC wide temperature range, JetNet 3706-RJ can be easily adopted in all kinds of outdoor applications providing the most rugged solutions for data transmission and power delivering in transportation systems, oil and mining sectors, factories, offshore, etc.
Product Features:
# IP67 waterproof, dust-tight for outdoor industrial applications
# Rugged, corrosion-resistant aluminum enclosure
# Six 10/100 TX auto-negotiation ports with IP67 grade robust RJ45 connectors
# Four IEEE802.3af PoE ports deliver 15.4W power per RJ45 port
# Easy-installed, rugged RJ45 connectors against vibration and shock
# -40~70oC wide operating temperature
|
|
Industrial 6-Port Unmanaged Rugged M12/RJ45 Ethernet Switch
* Rugged M12/RJ45 Connector for anti-vibration and shock
* Six 10/100 TX auto-negotiation ports with robust RJ45 or M12 connectors
* Redundant Power Inputs DC 24V (12~48) by M12 connector
* 3.2 Gbps switch fabric with excellent data exchange performance
* Broadcast storm control
* IEEE802.1p for Class of Service (CoS)
* -25~70oC operating temperature for hazardous environment application
* DNV Approval applying
* Railway EN50155/CE/FCC RoHS compliance
|
|
|
|
|
|
Introduction
The TN-5308 8-port unmanaged Ethernet switches use D-code M12 connectors and are certified to provide an ideal future-proof solution for rolling stock and railway industries where electronics devices must be able to withstand tough conditions such as vibrations, shock, power supply voltage variations, and EMI interference. Designed to meet industry standards, the TN-5308 is EN50155/50121-3-2/50121-4 and e-mark certified to ensure reliable operation under different power supply inputs and environmental disturbances.
In addition to M12 connectors for robust connections, the TN-5308 series also supports a power supply with universal 12/24/36/48 VDC inputs (LV model) or 72/96/110 VDC inputs (MV model) to satisfy a broad range of power demands and make them ideal for universal applications. The compact and robust design of the series allows for DIN-Rail or panel mounting and the switches can be directly installed on machines at field sites without an enclosure; wiring cost can therefore be reduced. Furthermore, the TN-5308 series comes with a variety of rugged features such as wide operating temperature, fanless design, and IP40 protected metal housing for reliable operations in the presence of heavy duty applications.
Features:
•M12 connectors and IP40 metal housing
•12/24/36/48 VDC input (LV model) or 72/96/110 VDC input (MV model)
•-40 to 75°C wide operating temperature
•EN50155/50121-3-2/50121-4, NEMA TS2, and e-mark certified
|
|
RS40 Full Gigabit Switches :
With its new Gigabit OpenRail switches, Hirschmann combines a concentrated Gigabit performance with high flexibility via 4 Combo ports. In this way nearly every fiber variant, such as multimode, single-mode or long haul, can be realized by the use of SFP fiber modules and, furthermore, 5 fixed Gigabit TX ports can be used.
|
|
|
|
|
|
The AR8216 is Atheros’ first Ethernet switch product and is the industry’s lowest cost, 6-port 10/100 Fast Ethernet switch. The AR8216 is designed to support a wide array of cost-sensitive wired and wireless networking applications and targets mainstream 802.11n and 802.11g wireless router and gateway platforms. The AR8216 offers design flexibility with its 6-port configuration consisting of five 10/100 Ethernet PHY ports, one MII port for CPU connectivity and six independent Media Access Controllers (MACs).
The AR8216 offers high levels of integration with the industry’s smallest footprint achieved through a significantly reduced number of system components in a compact 10mm x 10mm, low-profile quad flat package (LQFP). As a result, it delivers the industry’s lowest RBOM, optimized design flexibility and increased cost savings.
To provide non-blocking switching performance in all traffic environments, the AR8216 supports an advanced QoS architecture. This unique Atheros-designed architecture prioritizes switch traffic for different classes of applications, such as voice traffic for IP phones, video traffic for multimedia and data traffic for e-mail.
With the launch of this high-performance, low-cost Ethernet switch
solution, Atheros now provides its networking customers with all
of the major silicon required for complete wire-to-wireless router
solutions
|
|
|
|
|
|
Here the focus is on the requirement for the system provider to offer integrated solutions. Let us take for example the subject of Industrial Ethernet Networking: alongside the infrastructure elements such as switches and gateways Lütze also offers integrated solutions for cabling of the network. Lütze can supply all the necessary products, from Ethernet cables suitable for use in C-tracks to hubs and switches that can be mounted on DIN rails. This expertise is mirrored again in the application examples that overlap more than one industrial area.
So, for example, Lütze switches can be found just as easily in the semiconductor industry as in the harsh environment of railway vehicles. The list includes further applications in the textile and packaging machine industries.
The DIOPC serves as an intelligent gateway between the popular types of field bus and the Ethernet. A typical example is in greenhouse management where the DIOPC collects and controls signals from up to 10,000 inputs/outputs covering a wide variety of parameters including temperature, air humidity, CO2 content of the air, brightness, humidity of the earth and the condition of the plant fertiliser.
|
|
Ethernet, the world's best-known and most widespread network technology, is becoming increasingly popular for industrial applications as well. No other infrastructure offers such continuity from the office PC right to the machine, as well as allowing remote maintenance, secure web access and many more features.
The advantages are obvious:
optimum interoperability with office applications
consistent technology
simple procurement thanks to the interoperability between products from different suppliers
use of existing IT expertise
TCP/IP standard enables Web interfaces for maintenance and set up
higher bandwidth than customary fieldbuses
guaranteed future thanks to IEEE 802.3 conformity
|
|
Ethernet in industrial environment must be very reliable as downtime is much less tolerable in the factory than the office. Harsh environments with electrical noise and vibrations requires equipment of very high quality.
Ethernet is now a hot topic in automation, but all serial installations (RS-232 and RS-485) made during past years require different adapters and converters to connect already existing installations to Ethernet.
Westermo has different kind of Ethernet equipment, serial servers for RS-232 and RS-485, TCP PPP servers and client/host routers.
|
|
|
|
|
|
- Meets MIL-STD requirements for shock and vibration
- Nine real-time 10/100BaseT Ethernet ports
- Fully compliant with IEEE 802.3 and 802.3u Fast Ethernet operation
- Port activity and power indicators
- Auto-detecting 10/100 Mbps operation
High performance switching
The ToughSwitch 2 is designed to minimize collisions and network loading. It automatically determines and remembers where an Ethernet device is located and routes messages only through the appropriate port. The ToughSwitch 2 also buffers messages and transmits them in a rapid-fire sequence using a real-time switching technique called "store and forward".
Rugged, MIL-STD design
ToughSwitch 2 Ethernet switches eliminate the problems with installing industrial grade devices in extremely harsh environments. Their rugged packaging and protected circuitry keep them working under the most extreme conditions that may cause industrial grade switches to fail. The ToughSwitch 2 exceeds MIL-STD requirements and strict environmental standards for shock, vibration and temperature.
|
|
* SPIDER switch Family :
- Fast-ETHERNET switch
- 2 port media converter switches
- Switches for linear and star topologies from 3 up to 8 ports selectable
- Switches with optical ports
- Extended temperature range selectable (-40°C up to +70°C)
- New e1 approval for onboard vehicle applications
* Unmanaged OpenRail switches :
- individual configurable switches
- Fast-ETHERNET switches
- With up to 2 Gigabit-ETHERNET uplink ports
- From 8 up to 25 ports selectable
- Extended temperature range selectable (-40°C up to 70°C)
|
|
|
Dirt, temperature fluctuations and other critical environmental conditions at the field level? OCTOPUS has the ability for usage under extreme conditions: IP 67. The open system with standardized M12 technology is ideal for field use wherever space is extremely precious.
|
|
|
The Scalance family of unmanaged switches offer a cost effective connection of devices to the Industrial Ethernet using a line or star topology where simple plug-and-play connection and low cost port expansion are important requirements
|
|
The MultiLink ML2400 is a 19" Rack Mountable hardened Managed Ethernet Switch that is designed specifically for use in Industrial Facilities, Substations and Transportation environments. It will supply you with reliable, high-speed networking of all your mission critical applications and provide flexibility and security with easy to use management functions that are unsurpassed in the industry.
Modular Construction
Supports up to:
- 32 copper 10/100 Mb RJ45 ports
- 16 fiber optic ST, SC ports
- 12 fiber optic LC, MTRJ ports
- 8 1Gb copper or fiber ports
Ports can be mounted on the Front or Rear of the switch
Redundant power supply option available
Power supplies available in AC, 48VDC, and Universal AC/DC High Volt Options
All common media types supported including:
- 10/100 Base Copper (RJ45 Connector)
- 10BaseFL (ST Connector)
- 100BaseFX (ST, SC, LC, MTRJ Connectors)
- 1000BaseFX (SC Connector)
- 1000Base Copper (RJ45)
|
|
|
The Scalance X200 family of managed switches offers the ability to configure or design a fault tolerant network by utilizing a ring configuration. This family of high performance managed switches features a web-based interface for configuration and diagnostics.
|
|
|
The Scalance X200 family of managed switches offers the ability to configure or design a fault tolerant network by utilizing a ring configuration. This family of high performance managed switches features a web-based interface for configuration and diagnostics.
|
|
Fujitsu's 20 port 10G Ethernet switch IC has 10G SerDes and management processor integrated on chip.
The new AXEL-X Ethernet switch follows up the latest trends in networking and telecommunication applications like on chip management processor, large internal buffer sizes and on chip 10G serial interfaces enabling cost effective XFP based fiber networks designs.
Key features
- 20-port 10Gbps Ethernet layer-2 switch chip
- On chip: management processor, accusable via two 1GE ports
- On chip: XAUI, eXAUI (CX4) and 10G serial
- Drive copper cable up to 25m
- Direct support for XFP fiber modules
- On chip 2+Mbyte cut-through buffer size
- Fully featured priority and PAUSE management
|
|
|
Industrially compatible, flexible, economical and future-safe - these are only a few features, which the intelligent MICE system is offering. Regardless of standard or configurable switches, the modular structure pays off especially in the long term: MICE Switches and media modules offer you maximum flexibility and therefore perfectly prepared for the growing network demands of the future
|
|
X310 switch allows users to interconnect LANs on the automation cells to the enterprise networks via a gigabit backbone where bandwidth demands are high. The X310 Switch delivers the superior management features of VLAN and IGMP snooping and query
- Three integrated Gigabit Ethernet twisted-pair ports (10, 100 or 1000 Mbit/s) and seven integrated Fast Ethernet twisted-pair ports (10,100 Mbit/s).
- Fast Ethernet and Gigabit rings with fast redundancy (<0.3 seconds)
- PROFINET diagnostics and lost communication data can be obtained via web interface, e-mail or SNMP
- Ideal of Ethernet applications based on the multicast messaging scheme
- Stores configuration data, using the C-plug (Memory Module), reducing maintenance costs.
|
|
SCALANCE X400 offers everything you would expect of switches for application in high-performance plant networks, which must be equipped today for the even higher requirements of the future. Through modular construction, the switches can be precisely adapted to the particular application. Thanks to the support of Office standards, it is possible to seamlessly integrate automation networks in existing office networks.
The SCALANCE X-300 managed plus product line combines the firmware functionality of SCLANCE X-400 products (without routing functions on layer 3) with the compact design of SCALANCE X-200 products. The attribute "managed plus" means enhanced management functions in comparison to SCALANCE X-200, plus enhanced firmware functionality.
|
|
Compact, managed and unmanaged 8 port RS22 PoE switches for maximum reliability of complex automation solutions.
The PoE switches of the RS family using the phantom power (wire pairs: 1/2 – 3/6)
|
|
The Scalance family of unmanaged switches offer a cost effective connection of devices to the Industrial Ethernet using a line or star topology where simple plug-and-play connection and low cost port expansion are important requirements
Five full-duplex (10/100Mbit/s) RJ45 ports with rugged metal industrial housing and DIN rail or wall mounting
Industrial switch comparable to office switch-port prices
Convenience of having an Ethernet switch and connectivity in every panel
Plug-and-Play connection nothing to configure
Combined with the Industrial Ethernet FastConnect RJ45 connector, the integrated holding flanges on the port connection provides permanent and reliable data communication
|
|
|
|
