- Power Transmission - Mechanical components >
- Motor and Motor Control >
- Compact motor
Compact motors
Power: 0.06 kW - 37 kW
... synchronous motors can achieve IE4 / IE5 Super Premium Efficiency level with a compact motor structure. The permanent magnet motor solution could replace: •Traditional ...
Power: 0.06 kW - 37 kW
... extractor applications, the most concerned motor performance is the efficiency of the motor, higher efficiency will bring to the lower running cost. The permanent magnet fan motors, ...
Power: 0.12 kW - 13 kW
Torque: 0.75 Nm - 75 Nm
Rotational speed: 500 rpm - 6,000 rpm
... synchronous motor, i.e. high efficiency, high power density and compact dimensions, are of course also offered by the ABM SINOCHRON® motor. • Energy efficiency: High efficiency • ...
ABM Greiffenberger Antriebstechnik GmbH
Power: 0.25 kW - 2.2 kW
Intensity: 1.6 A - 11 A
Operating temperature: -10 °C - 40 °C
3-phase Motor with Integrated Controller. The switch to 3-phase motors is accomplished easily and impresses with a high reduction of TCO at maximum efficiency. • Identical power supply as with previously ...
ABM Greiffenberger Antriebstechnik GmbH
Rotational speed: 6,000, 7,250, 7,000 rpm
... enclosed motors for short-time duty. This special design without a housing features high peak powers and an optimum price-to-performance ratio. Typical uses are applications with high peak loads and low continuous outputs, ...
ABM Greiffenberger Antriebstechnik GmbH
Power: 12.8 kW
... Technical specifications ZEFIR lift motors: • MINI CLASS Z 18X: • Useful load 225 kg ... 630 kg; lifting height up to 20 m • MAGIC CLASS Z 24X: • Useful load: 225 kg ... 1,250 kg; lifting height ...
•High efficiency asynchronous and brushless motors for kitchen range hoods • Programmable integrated electronic card (fixed speed or 0-10V control) • Air flow from 350 to 900 m3/h • ...
Power: 1,160 W - 2,200 W
... commutator motor and single fan stage. The rotor is supported with two ball bearings enabling vertical or horizontal installation of motor. The motor is designed for insulation class ...
DOMEL D.O.O.
Power: 21 kW - 420 kW
Intensity: 42 A - 700 A
Torque: 65 Nm - 1,340 Nm
• IEC axle heights 100-225 • Cooling type IC06 with open circuit circulation • Compact design • Very long service life • Large field weakening range • Low maintenance (brush-free) • High degree of effectiveness Therefore ...
Power: 0.33, 0.5, 0.25 W
Rotational speed: 1,800, 1,200 rpm
GW EC Motor is multi-speed, constant torque and brushless The EC Motor is High efficiency at all speed, efficiency up to 80% The electric motor is soft start life span and linear speed ...
Power: 1 ch - 270 ch
... electric-car motors (1-270HP) feature compact size/light weight, high efficiency, and high reliability, meeting the electric-power needs of new-energy vehicles of various customers. With passage of TS ...
Power: 1 kW
Rotational speed: 3,000, 2,100 rpm
... Connection type Double angular built-in connector The innovative connection system developed for this compact servo motor series only requires a small amount of space for cabling ...
B&R Industrie-Elektronik
Power: 28, 37, 14, 17 W
Torque: 0.14, 0.05, 0.09, 0.2 Nm
Rotational speed: 2,475, 1,800 rpm
Motors are available in 12, 24, 90, or 180 volts. Power range from 1/18 HP to 1/3 HP. Armatures: Dynamically balanced Commutators: Tang-type, diamond turned Varnishing: Class H polyester trickle varnishing Magnets: ...
BISON
Intensity: 1.68, 1.33 A
Torque: 0.22, 0.44, 0.36 Nm
Operating temperature: -20 °C - 50 °C
NEMA17(42mm) hybrid stepper motor with built-in driver NEMA17(42mm) hybrid stepper motor with built-in driver More compacted, Plug in and drive
Changzhou Fulling Motor Co., Ltd
Power: 400 ch
Rotational speed: 2,400, 1,150 rpm
Baldor-Reliance® Top Drive drilling motors are durable, safe and meet the performance demands of onshore drilling rigs. The compact, power dense design offers more power in a smaller ...
Baldor Electric Company
Power: 2,240, 1,000 kW
Operating temperature: -50 °C - 60 °C
ABB rib cooled motors are a high efficiency solution for a wide range of applications and industry segments. Our rib cooled motors provide the benefits of a small size with high power density, high reliability, ...
ABB Motors Drives and Power Electronics
Power: 13 W - 93 W
Rotational speed: 3,300, 3,100, 3,600, 3,150 rpm
Operating temperature: 0 °C - 40 °C
... commutated ebm-papst DC motors from the BCI series are available in three different sizes and many voltage variants. In combination with our planetary, crown and spur gears, they offer a wide range of ...
ebm-papst
Intensity: 0.28 A - 6.3 A
Torque: 0.02 Nm - 120 Nm
Diameter: 0.79 in - 3.35 in
High-torque, 2-phase bipolar stepper motors and geared type stepper motors offer the optimum performance and value. In addition to offering high torque, the PKP series stepper motors ...
ORIENTAL MOTOR
Power: 3.7 W - 76.9 W
Torque: 0.1412, 0.2118, 0.0706, 0.2825 Nm
Rotational speed: 0 rpm - 6,000 rpm
... quadrant open loop ○ Compact integrated encoder option ○ PLC or RS232 compatible Electrical • Integral Motor Controls Matched to a Motor Winding • 2 or 4 Quadrant Operation • ...
Hurst
Power: 81 W
Torque: 0.126 Nm
Rotational speed: 5,200 rpm
Small motors from Bühler Motor Lifting, lowering, turning, driving, controlling, adjusting – Bühler Motor is famous for its individually tailored solutions. Brushless ...
Bühler Motor GmbH
Power: 0.333, 0.5, 0.2 ch
Torque: 1.31, 1.38, 2.09 Nm
Rotational speed: 1,800, 1,700, 1,400 rpm
... 42A, 42R, and 48R motors and gearmotors [model 0984] Die cast metric terminal box kit with terminal block for 33A, 34R, 42A, 42R, and 48R motors and gearmotors [model ...
BODINE ELECTRIC COMPANY
Power: 5.1 ch - 44.6 ch
Intensity: 9 A - 64 A
Rotational speed: 44 rpm - 221 rpm
... induction motors that lose efficiency at lower speeds, Imperial Electric gearless AC machines provide unusually capable low speed, high torque operation -and consume up to 40% less power ...
Imperial Electric
Power: 0 W - 65 W
Torque: 0 Nm - 0.23 Nm
Rotational speed: 0 rpm - 3,000 rpm
Groschopp supplies AC-motors in both single- and three-phase-current. Single-phase-current motors are often found in domestic appliances, pumps, fans, conveyor belts and machine tools. Application for ...
GROSCHOPP AG Drives & More
Power: 0.12 kW - 9 kW
Torque: 0.75 Nm - 28.6 Nm
Rotational speed: 1,500 rpm - 3,000 rpm
Advantages • High efficiency —› energy efficient • Sinochronous motors with high performance permanent magnets • Efficiencies of 90 % and higher • Compact design • High power density • Precise speed ...
Intensity: 0.35, 1, 0.6 A
Torque: 0.17, 0.063, 0.049 Nm
Operating temperature: -20 °C - 50 °C
... 50 pc MOQ • 2-phase hybrid step motor • Standard NEMA 14 dimensions The 5014-020 two-phase stepper motor is suitable for a wide range of motion control applications. Optional Planetary Gearheads This ...
Torque: 0.017 Nm - 50 Nm
... new motors' line, suitable for many different purposes. ● Suitable for many different application fields ● Advanced construction solutions: √ up to 40% torque increase than standard motors ...
Power: 0.55 kW - 22 kW
The compact unit, consisting of motor and frequency converter, offers outstanding cost advantages compared to conventional units: - no costs for drive configuration - thanks ...
VEM motors
Power: 0.09 kW - 55 kW
Integral motors The EUSAS integral motor is part of the Watt motor system. All features and benefits have been implemented and further developed. The motor is robust, ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining