|
|
|
|
|
|
Sauer Compressors UK offers a wide family of gas compressors:
'H' series compressors are used for Air or Nitrogen compression. Each compressor is an air-cooled, single acting, three or four stage-reciprocating piston compressor with the combination of oil pressure fed crankshaft bearings, and cylinder oil splash with regulated injection for the final high-pressure piston plunger design.
Performance with inert gases, such as Nitrogen, ranges from 10 to 150 Nm^3/h within a final pressure range of 100 to 350 bar including the Sauer unique NitroFlex integrated 'all-in-one' - Compressor, generator and gas booster.
'W' series compressors are oil-lubricated, single acting water-cooled piston compressors for air or inert gas compression in two or three stages from 10 to 100 bar with gas flow-rates from 65 to 400 Nm^3/h.
'LB' series inert gas boosters are dedicated nitrogen gas boosters that can accept suction pressures from 4 to 14 bar to deliver gas to a maximum of 40 bar. This single stage gas booster range is the result of years of trouble-free experience with the 'L' range.
'L' series compressor/boosters offer a wide range of gas flow-rates from 10 to 400 m^3/h at pressures to 40 bar in two or three stages based upon the established marine diesel air-start Sauer range of two and three stage oil-lubricated, piston compressors. Even as air compressors they can be safely adapted for use in Ex-atmospheres to ATEX regulations
|
|
Silenced piston compressors are the perfect choice for indoor installation.Thanks to their low residual noise level, they can be installed near the workplace which reduces the length of pipeworks and related pressure drop.
Fonolife
- Vertical design for small footprint
- Easy access to components
- Oil sight glass visible through the canopy
- Low rotation speed for reliability
- Control panel with hourmeter and power switch
|
|
|
The particularly compact structure and the low noise levels characterising this king of compressors allow installation directly in the work area. Thanks to the particular features, it is possible to achieve a considerable soundproofing level, according to which our silenced compressors may be installed and put into operation without any risk of environmental pollution.
|
|
Up to 350 bar
An alliance of advanced technology an user-friendly operation
With our long tradition of technology and ongoing research and development, our machines are highly mature and the most advanced in this market segment.
When designing our compressors, we concentrate on the essentials - maximum functionality - , because that's what counts, with form following function, using tried and tested, classic mechanical engineering principles for ease of use, with the main maintenance points readily accessible.
|
|
|
|
|
|
Sauer Compressors UK offers water cooled compressors covers up to 350 bar.
With our long tradition of technology and ongoing research and development, our machines are highly mature and the most advanced in this market segment.
When designing our compressors, we concentrate on the essentials - maximum functionality -, because that's what counts, with form following function, using tried and tested, classic mechanical engineering principles for ease of use, with the main maintenance points readily accessible.
Our know-how in the design and construction of water-cooled compressors, gained over 75 years in
supplying dockyards and shipping company’s worldwide, has meant we can offer a series of highly competitive alternatives for use where air-cooled compressors cannot be used. Enjoy the benefits of
robust water-cooled compressors for your application: low noise, no need for cooling air and much less heat release to the environment.
Water-cooled high-pressure compressors have proven themselves in exceptionally tough applications, such as submarines and aircraft carriers. They are the safe choice for all applications in which air-cooled compressors are impractical. For your special requirements, you can depend on the advantages of this high-performance, extremely robust series.
|
|
|
|
|
|
Sauer Compressors UK offers water cooled compressors covers up to 350 bar.
With our long tradition of technology and ongoing research and development, our machines are highly mature and the most advanced in this market segment.
When designing our compressors, we concentrate on the essentials - maximum functionality -, because that's what counts, with form following function, using tried and tested, classic mechanical engineering principles for ease of use, with the main maintenance points readily accessible.
Our know-how in the design and construction of water-cooled compressors, gained over 75 years in
supplying dockyards and shipping company’s worldwide, has meant we can offer a series of highly competitive alternatives for use where air-cooled compressors cannot be used. Enjoy the benefits of
robust water-cooled compressors for your application: low noise, no need for cooling air and much less heat release to the environment.
Water-cooled high-pressure compressors have proven themselves in exceptionally tough applications, such as submarines and aircraft carriers. They are the safe choice for all applications in which air-cooled compressors are impractical. For your special requirements, you can depend on the advantages of this high-performance, extremely robust series.
|
|
|
Maneurop reciprocating compressors are universal compressors for both commercial refrigeration and air conditioning applications with refrigerants R22, R407C, R134a, R404A and R507A. The range consists of single compressors with rotolock connections and factory made tandem units. The Maneurop compressors are suitable for parallel mounting (racks).
|
|
ROLLAIR 80 - 100 - 125 - 150EA compressor developed in line with a longstanding tradition : quality, reliability, reduced maintenance costs, optimum energy efficiency.
Power: 75 up to 150 ch
Pressure: 7.5 up to 13 bar
FAD: 429 à 1175 m³/h
Noise level: 64 up to 73 dB(A)
Cooling: AIR or WATER
|
|
PREMIUM COMPRESSORS
Ideal for any construction site, the compact and powerful "Premium" piston compressor range is ideal for all sandblasting, nailing, tacking, jointing, impact wrenching, drilling, sanding and painting applications; the possibilities are endless. All units are easy to transport and are manufactured to the highest quality standards to ensure a long, efficient and reliable service life.
|
|
Industrial lubricated piston compressor designed for an intensive use 24 hours a day corresponding to the most demanding customer's needs.
Power : 2 to 15 hp
Pressure : 10 to 15 bar (145 to 218 PSI)
Air receivers : 120 to 500 litres
Exists on frame or air-receiver mounted
|
|
From 30 kW to 480 kW
Outlet nominal pressure 40 bar: for PET blow moulding applications
Outlet nominal pressure 15 to 40 bar: for industrial oil-free applications
A special series for PET applications
The P-series is the product range perfectly customised to the PET blow moulding applications. The compressors deliver 100 % oil-free air at 40 bar as standard.
They are delivered as complete, ready-to-use installations.
Several compressors can be monitored in the same compressor room with the Centralised ES energy saving control system.
The P27 to P45 models benefit from an up-graded design (integrated coolers) for higher efficiency and easier maintenance.
15 to 40 bar : a series for industrial, oil-free air applications
These compressors can be ajusted to the pressure you need for other industrial oil-free applications within a pressure range between 15 to 40 bar.
|
|
CLASSIC COMPRESSORS
There is a "Classic" model to suit every workshop air demand.
A "Classic" series compressor is the perfect choice for all wheel changing, tyre pressurisation, painting, chiseling and chipping applications. Proven quality, robust construction and long service intervals (fluid change every 2 years) provide maximum air availability and unrivalled value.
|
|
SNX 20 - 100
This soundproofed piston compressor, with cast iron cylinders and IP55 motor, can easily be installed in any kind of workshops, while being environmental friendly.
Power : 2 to 10 hp
Pressure: 10 or 12 bar
Air receiver: 100, 300, and 500 l
Noise level: 62 to 64 dB(A)
Dryer option for 500 l version
|
|
This soundproofed piston compressor, with cast iron cylinders and IP55 motor, can easily be installed in any kind of workshops, while being environmental friendly.
Power : 2 to 10 hp
Pressure: 10 or 12 bar
Air receiver: 100, 300, and 500 l
Noise level: 62 to 64 dB(A)
Dryer option for 500 l version
|
|
Beverages :
Compressed air to drive beer pumps
When Dispensing Beer do you have any of these problems?
- Over Carbonated Beer in Glass?
- Slow Dispense Beer Wastage?
- Over Carbonated Beer in Kegs?
To Dispense the Perfect Pint Contact us we have the Solutions
Soft Drink Dispense
Small compact compressor stations available to drive syrup pumps.
|
|
Compressor stations
Plug and play straight from the box
High reliability
Extremely long service life
Low noise levels
100 % continuous operation
|
|
Raising the Pantograph
On start-up of the locomotive the pantograph has to be raised to make contact with the overhead power line. An oilfree compressor station provides the auxiliary compressed air supply. A range of DC-compressors with a variety of voltages is available.
|
|
We supply compressor stations, with fitted plug complete with receivers from 3 l up to 90 l volumes. All pressure receivers have internal corrosion protection and are manufactured to EEC regulation 87/404.
|
|
| ... products without technical information |
| |
|
|
