|
|
Ammann aims to offer users all the benefits of modern technology, in line with constantly changing requirements on construction sites. The focus is on people: alongside high performance and efficiency, user-friendliness is a key factor in our machines.
More than 15 years ago, we broke new ground by developing hydraulically-driven vibratory plates. Nowadays Ammann is numbered among the leading providers in this equipment category. |
|
Forward Soil Plates
Dynapac offers a comprehensive range of forward soil plates that are specially designed for compacting granular soils. They are ideal and most economical for small repair and maintenance work. Forward plates are also a compliment to rollers that may not be able to operate effectively in confined spaces.
Forward Asphalt Plates
Dynapac offers a comprehensive range of forward asphalt plates that are specially designed for compacting asphalt. They are ideal and most economical for small repair and maintenance work, such as driveways, pathways and parking lots. Forward asphalt plates are also a compliment to asphalt rollers that may not be able to operate effectively in confined spaces.
Forward & Reversible Plates
The range of forward and reverse plates are an economical alternative or compliment to a roller. These allround machines are specially designed to compact soil in confined areas, such as in trenches and parking lots, among other areas. Forward and reverse plates are also suitable for special applications, such as block paving. Forward & Reversible plates are also a compliment to rollers that may not be able to operate effectively in confined spaces. |
|
Ammann aims to offer users all the benefits of modern technology, in line with constantly changing requirements on construction sites. The focus is on people: alongside high performance and efficiency, user-friendliness is a key factor in our machines.
More than 15 years ago, we broke new ground by developing hydraulically-driven vibratory plates. Nowadays Ammann is numbered among the leading providers in this equipment category. |
|
| The Single Direction Vibratory Plates are mainly used in following applications: soils and asphalt compaction, interlocking blocks, footpath construction and maintenance, trenches and pipelines, sportsgrounds, landscaping and groundwork engineering. |
|
Our Plate Compactors are manufactured in our factory, with registered brandname "Vibrotech" in compliance with ISO 9001-2000 Certification and CE.
Five different type of compactors are available currently in our production line:
PC 40 / Moulding Plate and Iron Sheet Plate:
Plate Type : Moulding/ Iron Sheet (Optional)
Plate Dimensions : 40 x 52 cm
Compaction Capacity : 530 m2 / h
Gradeability : 30 %
Centrifugal Force : 18 kN
Vibration Frequency : 78 Hz
Weight : 90-105 kg
Engine Options :
-Honda Gasoline 5.5 HP
-Lombardini Gasoline 6 HP
-Lombardini Diesel 4.8 HP
-Hatz Diesel 4.6 HP
-Electrical 4 HP
PC 50 / Moulding Plate and Iron Sheet Plate:
Plate Type : Moulding and Iron Sheet (Optional)
Plate Dimensions : 50 x 60 cm
Compaction Capacity : 660 m2 / h
Gradeability : 30 %
Centrifugal Force : 26 kN
Vibration Frequency : 78 Hz
Weight : 120-145 kg
Engine Options :
-Honda Gasoline 9 HP
-Lombardini Diesel 6.5 HP
-Hatz Diesel 6.8 HP
-Electrical 5.5 HP
PC 60 / Moulding:
Plate Type : Iron Sheet
Plate Dimensions : 60 x 70 cm
Compaction Capacity : 830 m2 / h
Gradeability : 30 %
Centrifugal Force : 35 kN
Vibration Frequency : 80 Hz
Weight : 160-175 kg
Engine Options :
-Honda Gasoline 11 HP
-Antor Diesel 12 HP
-Hatz Diesel 10.5 HP
-Ruggerini Diesel 10 HP
-Electrical 7.5 HP |
|
| ... products without technical information |
| |
| Sheet Metal Module provides intuitive 3D modeling for sheet metal parts. The capabilities include automated bend relief, unfold and ability to work simultaneously in 3D and flat pattern. The software automatically understands modeling intent, such as bend type, based on user edge selections on the model. |
|
| TopSolid'PunchCut is a fully integrated CAM software for sheet metal processing. It pilots numerically controlled punching machines, 2 and 3 axes laser cutting machines and combined machines. One programming system for all of these technologies guaranties optimal flexibility for the company by making its processes more secure and reliable. |
|
| 100% focused on applications for flexible sheet metal working technology, COMPUTES provides a complete suite of sheetmetal software products, fully independent but perfectly integrated: CAD and CAM solution for turret punching, laser, plasma, oxycut and combined machines; drawing and unfolding modules; CAD and CAM system for press-brakes and metal forming systems; scheduling and monitoring of automated production lines, FMS and handling technology. |
|
DEFORM™-3D is a powerful process simulation system designed to analyze the three-dimensional (3D) flow of complex metal forming processes. DEFORM-3D is a practical and efficient tool to predict the material flow in industrial forming operations without the cost and delay of shop trials. Typical applications include:
- forging
- machining
- rolling
- extrusion
- heading
- drawing
- cogging
- compaction
- upsetting
Based on the finite element method, DEFORM has proven to be accurate and robust in industrial application for more than two decades. The simulation engine is capable of predicting large deformation material flow and thermal behavior with astonishing precision. |
|
- Search by Attribute
Radan CAD/CAM users now have the option to use Radview to search for drawings and symbols by attribute, in addition to the traditional Windows File Open dialog.
- Enhanced auto-dimensioning
Auto-dimensioning now recognises more shapes as individual features. This can dramatically reduce the number of dimensioned points which are added to a drawing.
- Improved setup sheets
User configurable, with thumbnails of parts and more information.
Efficient use of costly materials is of the utmost importance to maximise profitability.
- Improved Common Line Cutting
Auto-tooling of common line cutting has been greatly improved – including intelligent lead-in placement.
- Improved nesting
Up to 50% improved material utilisation for shapes that stack at angles.
- Automatic remnant storage and tracking
When nests are created with spare capacity on the sheet the remnant can be stored for later use.
- Automatic remnant usage
The nester will try all remnants stored in a folder and select the best one to use. |
|
ACT/UNFOLD software offers a complete 3D and 2D working environment which allows to import 3D CAD models, to design sheet metal parts from scratch, to unfold 3D parts and to export the flat patterns to any CAM software for bending, cutting or punching.
You can download an evaluation version of this software and order on line on our website. |
|
Programming system to control the press brakes with numerical control.
This software makes it possible to calculate and program ranges of folding using a library of matrices and punches. This library entirely personnalisable makes it possible to modify and create tools.
The sequences of folds are displayable thanks to simulation 3D. The software manages the collisions automatically.
After validation of the ranges of folding, the ISO code is generated then sent to the press brake |
|
Lantek Expert Cut is a CAD/CAM system specially designed for automating the programming of sheet metal cutting machines (oxycutting, plasma, laser and water jet).
Leaders in oxycutting and plasma
Lantek Expert cut optimises continuous cutting, automatically positions multi-torches and automatically calculates the most suitable remnants.
Established in laser and water jet
Lantek Expert Cut optimises cutting, avoiding passing over already cut holes, and manages different cut qualities. |
|
Lantek Expert Punch is a CAD/CAM system specially designed for automating the programming of CN punching machines.
Automatic and manual nesting with great flexibility and optimum performance.
Lantek Expert Punch improves the automatic loading and unloading of the sheets and automatic part removal.
It correctly manages Autoindex tools, Multitool stations and all types of tools for forming, embossing, drilling, threading, stamping, rolling, shearing, etc.
It enables micro-cuts to be automatically inserted in parts interwoven in the sheet. |
|
Lantek Expert Duct ist speziell für die automatische Programmierung von Blechschneidemaschinen konzipiert.
BEMAßUNG NACH DEN DIN-NORMEN
Die Figurenabwicklungen erfüllen die DIN-Norm 18.379 und gewährleisten somit die Übereinstimmung mit den europäischen Fertigungsnormen. Alle bereitgestellten Informationen zu den Abwicklungen entsprechen ebenfalls den dafür gültigen Normen.
DIREKTZUGRIFF AUS ALLEN PROGRAMMEBENEN HERAUS
Von jedem Programmteil aus kann direkt in anderes Modul hinübergewechselt werden. Durch diese fortschrittliche Funktionalität bleibt die Bedienung des Programms übersichtlich und schnell.
SCHNITTSTELLEN ZUR VERBINDUNG MIT ANDEREN CAD-SYSTEMEN
Mit Hilfe der integrierten DXF-Schnittstelle können Zeichnungen aus jedem anderen CAD-System importiert werden. Es können komplette Listen mit Geometrien auf einmal importiert werden. Aus Zusammenbauzeichnungen lassen sich einzelne Geometrien herausfiltern und einzelne Layer individuell einlesen.
WEITERE SCHNITTSTELLEN (optional)
Auf Anfrage sind weitere Schnittstellen für andere CAD-Formate wie z.B. IGES, DWG, DSTV, IPS, etc. erhältlich.
|
|
Our family of Lantek Flex3D offers a complete solution for 3D design, bending of plate pieces and cutting of pipes and profiles.
Lantek Flex3D PRODUCT FAMILY
Flex3D Unfolding: Is an application used for simple and intuitive 3D design of parts and their subsequent unbending automatically.
Flex3D Tubes: Is a specific application for the design and cutting of pipes and profiles.
Flex3D SW: Is a 3D design module for sheet metal totally integrated with SolidWorks®.
Flex3D Bending: Is an application which generates the bending sequence automatically from the 3D design.
Flex3D SE: is a software program which enables 3D sheet metal designs to be automatically unfolded and saved in the Lantek Expert database for subsequent use with Lantek Expert Cut and/or Punch. Totally integrated with Solid Edge®.
Flex3D 5X: Is an application for automatic programming of five-axis machine tools for laser and water-jet cutting applications.
|
|
| ... products without technical information |
| |
KLINGSPOR strips, sheets and discs are available in various qualities and designs.
- strips/sheets/discs
- for general use for free-hand grinding and sanding and for use with hand held power tools
- specially designed for particular materials
- special sizes available on request
- for wet and dry grinding |
|
| Sheets are universal products for manual work and hand-held machines. Special versions are available designed to work certain materials (e.g. wood, metal, etc.) and users can cut or tear sheets to suit their individual needs. Sheets used in conjunction with a sanding block can be used to form various edge and surface profiles, internally and externally. With paper or cloth backings, the sheets and strips can be used for both wet and dry grinding, depending on the grade chosen. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
