|
|
| Assembled enclosures with backplanes, power supplies, and various configuration options. Modified standard and custom solutions also available. |
|
VME bus
- Available from stock
- Combination from VMEbus and 19’’ technique
- System with plug and play technique
CompactPCI
- Available from stock
- Combination from CompactPCI bus and 19’’ technique
- System with Plug and Play technique
VME64xbus
- Available from stock
- Combination from VMEbus and 19’’ technique
- System with Plug and Play technique
|
|
| Investing in the best industrial PC makes no sense if the enclosure is not suitable for use in harsh industrial environments. The racks and enclosures shown on the following pages are optimized for the special conditions of industrial use and ensure the highest degree of safety against external interferences. Our twenty years of experience in developing and producing industrial electronics ensures that you will find the optimum solution for your application. |
|
| ... products without technical information |
| |
6U CompactPCI Boards
Full line of 6U CompactPCI products supporting PICMG 2.16, IPMI, Hotswap, TPM, System Management. For more information on CompactPCI integrated systems, please click here systems
A complete overview provides Kontron's CompactPCI Product Guide. |
|
5.25-inch Single-board Computer with LVDS, CRT, SSD, LAN, Audio, DVI and TV-out
Model Number:EC5-1719CLDNA
Supports Intel Core Duo and Celeron-M low power processor
Intel 945GM and Intel ICH7 chipset
Supports 1 x DDR-2 DIMM slot (supports 533/667MHz DDR2)
Intel 945GM Integrated graphic controller
Supports VGA, LVDS, DVI, TV-out and dual display
Supports 2 x SATA and 1 x ATA100 IDE port
Supports 2 IDE devices
Supports 4 x USB2.0, 1 x LAN, 1 x parallel port, 3 x RS-232, 1 x RS-232/422/485, 1 x PS/2 and 1 x CF card devices
Supports 1 x PC/104-plus and 1 x PCI-E slots |
|
* cPC2PMC64-T - cPCI Hot Swap dual PMC Carrier 64Bit / 66MHz for H110 :
CompactPCI dual PMC carrier for 64-bit / 66MHz hot-swap applications. Uses the HB6 bridge chip from HiNT ensuring full compliance with PICMG 2.1 R2.0 with PI = 1 support.
* cPC2PMC64 - cPCI Hot Swap dual PMC Carrier 64Bit / 66MHz :
CompactPCI dual PMC carrier for 64-bit / 66MHz hot-swap applications. Uses the HB6 bridge chip from HiNT ensuring full compliance with PICMG 2.1 R2.0 with PI = 1 support.
Two versions are available providing a choice of I/O depending on whether P4 is being used for the H110 telecoms bus.
* cPC2PMC-T - Hot Swap dual PMC Carrier for Telco Applications :
CompactPCI Hot Swap Dual PMC Carrier, the same as cPC2PMC but with the rear I/O from the PMC sites routed to J3 and J5 instead of J3 and J4. This alternative pinout is compatible with systems using H110 backplanes.
* cPC2PMC - Hot Swap dual CompactPCI PMC Carrier :
CompactPCI Hot Swap Dual PMC Carrier, compatible with cPCI Hot Swap specification 2.1 R1.0, Uses Texas Instruments PC12250 33MHz 32bit PCI bridge conforming to PCI local bus specification 2.2, PMC rear I/O via J3 and J4, 3.3 or 5 Volt signalling. Full hot swap support under Windows 2000 and XP Embedded. |
|
- 6U, 64-bit/66-MHz, system-slot or peripheral-slot or stand-alone
- PowerPC MPC8540 or MPC8560, 800 MHz and higher
- Cyclone FPGA for tailor-made computer I/O
- SODIMM socket up to 2 GB DDR SDRAM, optional with ECC
- Linux, VxWorks, QNX |
|
| Backplanes in various industry-standard architectures and custom design services. Signal integrity services are also available. |
|
VMEbus
- Conforming with VITA 1-1994
- J1, J2 and J1/J2 backplane
- Manual or automatic daisy chain
VME64 Extension
- Conforming with VITA 1-1994 VME standards, VITA 1.1-1997 VME64 Extension standards, VITA 38 System Management for VME
- Termination, passive
- Electronic automatic daisy chain (EDC)
- Outstanding high-frequency noise suppression and very high MTBF due to ceramic capacitors
CompactPCI bus
- For durable industrial application
- CompactPCI is an adaptation of the Peripheral Component Interconnect (PCI) specification, version 2.1
- Power supply selectable with screw connections, ATX-PSU-connector, connector type M
- Clock signal less running times with optimum skew
ATCA Backplane
- Conformity with PICMG 3.0 ATCA Core Specification (ATCA= Advanced Telecom Computing Architecture)
- Full Mesh and Dual Star Topology
- 4 Ports per Link
- Slots for 2 redundancy Shelf Management Controller
- Connector for fan unit integrated
|
|
- Intel® Core™ Duo processor
- Mobile Intel® 945GM Express chip set
- 3U CompactPCI®/ CompactPCI® Express system master
- Designed and qualified for harsh industrial environments
- Linux, Windows®, VxWorks®, QNX® |
|
- Intel® Core™ 2 Duo processor
- Mobile Intel® 945GM Express chipset
- 3U CompactPCI®/ CompactPCI® Express system master
- Designed and qualified for harsh industrial environments
- Linux, Windows®, VxWorks®, QNX® |
|
| Among many useful features and practical details, such as the support of Master redundancy concepts, process image with time stamping function, among others, the new DF PROFI II convinces by its well thought-out and performance-oriented concept aimed at the future. It is available as PCI, XPCI, CPCI und PC104+ version. |
|
| ... products without technical information |
| |
Customization is the standard at ELMA. With an extensive offering of modular products as a foundation, ELMA is able to leverage existing solutions and proven design concepts to meet any custom application. This approach insures that ELMA will provide quality, compliant solutions with reduced lead time, cost and risk.
Custom solutions for:
AdvancedTCA
CompactPCI
PICMG 2.16, Gigabit Ethernet
CompactPCI Express
MicroTCA
PXI
VXI
VME/VME64x
VPX
VXS
|
|
| In addition to the enclosure, the power supply plays a major role when it comes to the reliability and performance of an industrial computer. Take a look at the various power supplies for different applications, each with different capabilities and substantial safety features. |
|
- CompactPCI board in single Eurocard format
- WLAN standard IEEE 802.11b
- Outdoor range up to 600 meters
- -40 to +85°C operation temperature |
|
| Galil offers a complete line of single and multi-axis controllers for stepper and servo motors. Interfaces include PCI, ISA, PC/104, cPCI, VME, USB, RS232 and Ethernet. Modes of motion include point-to-point positioning, jogging, linear and circular interpolation, contouring, ecam and electronic gearing. Also programmable I/O for interface to external sensors. |
|
|
|
