|
|
Highlights
Increase of E-module and tear resistance
Reduction of cold flow
Low thermal expansion coefficient
Low permeation
Improved adhesion
PTFE-sheets combined with fabrics, fibers, metal foils, glass and elastomer films
Typical Applications
Linings for chemical industry requirements
High-strength compounds (XYMON)
Guides and bearings
Composite membranes
Base materials for printed circuit boards
Conveyor belts
Customer-specific composites
|
|
A core material produced from certified kiln-dried balsa wood in the 'end-grain' configuration. The properties of balsa make it ideal as a core for sandwich construction. It has extremely high strength and stiffness to weight ratios, and achieves an excellent bond with all types of resins and adhesives. It is compatible with a variety of manufacturing processes and is resistant to temperature changes, or exposure to fire, or chemicals such as styrene. It is an ideal core material for an extensive range of applications. All while being a renewable resource.
- extremely high strength and stiffness to weight ratios
- excellent fire performance
- ecological product
- wide operating temperature range (-212°C to +163°C, -414°F to +325°F)
- excellent fatigue resistance
- good sound and thermal insulation
- high impact strength
- good moisture resistance
|
|
A thermoplastic foam that combines outstanding fire resistance with low smoke and toxicity, along with excellent dielectric properties. It has a high strength to weight ratio, low moisture absorption, is thermoformable, and ductile. It is an exceptional core material for use in applications that demand structural fire resistance, are required to be transparent to radar, or operate in extreme hot or cold environments.
- fulfils most stringent fire requirements
- operating temperature from -194°C to +160°C (-317°F to 320 °F)
- remains ductile at cryogenic temperatures
- excellent dielectric properties (radar transparent)
- very low moisture absorption
- good fatigue resistance
- high impact resistance (non-brittle failure mode)
- thermoformable
- good sound and thermal insulation
|
|
A unique closed cell, cross-linked polymer foam that combines high stiffness and strength to weight ratios with superior toughness. It is non-friable, contains no CFCs, has negligible water absorption, and provides an excellent resistance to chemicals. A fine cell structure offers an excellent bonding surface that is compatible with most resins and manufacturing processes. It is ideally suited as a core material for a wide variety of light-weight sandwich structures subjected to both static and dynamic loads in service.
- high strength and stiffness to weight ratios
- good impact strength (highest elongation in class)
- low resin absorption
- high fatigue resistance
- good fire performance (self-extinguishing)
- sound and thermal insulation
- non biodegradable
- good styrene resistance
|
|
|
|
|
|
Corecell™ is the leading structural foam core material, which has become widely accepted for the construction of large, high performance structures. It is the latest in foam core technology and although originally developed for the marine industry, it is now used in other applications such as wind turbines and sub sea vessels.
Corecell™ uses SAN polymer base, resulting in unique high tougness and impact resistance characteristics. The foam acts as a 'shock absorber' between the two skins - absorbing the impact without failing, distributing the stresses evenly within the core and, in the case of a boat, ensures it remains watertight even after high point impacts.
Corecell™ foams provide low weight, excellent stiffness, and structural integrity under dynamic loads. They have high shear elongation and retain their mechanical properties even in the higher ambient temperature range.
Corecell™ foams are compatible with polyester, vinylester, and epoxy resins. Corecell™ is type approved by the American Bureau of Shipping (ABS), Lloyds Register of Shipping, Det Norske Veritas (DNV) and Germanischer Lloyd (GL).
The Corecell™ product range provides increased levels of performance, strength, structural integrity and comfort, unmatched by any other core material. Suitable for a wide range of demanding structural applications and different composite manufacturing processes.
|
|
ArmaFORM is the solution capable of coping with all requirements in the composite market, the innovative foam core made of PET foam is lightweight, strong and resistant to both heat and chemicals. It can be covered with most laminates and foils.
- Low weight (Available densities: 100 kg/m3 and 150 kg/m3)
- Extreme mechanical resistance through high compression strength, high stability and high shear modulus
- High structural stability
- High temperature resistance: has an excellent processing temperature.
- Short-term maximum temperature up to 200°C.
- Thermoformable
- High resistance to chemicals
- Very good thermal insulation due to its excellent thermal conductivity properties
- Very low water absorption due to its inherant cell structure
- Good bonding behaviour with all laminates and foils
- Easy to use with all common procedures used in composite applications
- Low toxic smoke emission and no corrosive gas development in the event of a fire
- Gridscore version also possible
|
|
| ... products without technical information |
| |
Internal dimensions :
Ø=1000 mm x L=1600 mm
Working temperature : 200°C
Working pressure : 10 bars
Control system :
By specific software and supervisor
|
|
Internal dimensions :
Ø=1500 mm x L=3000 mm
Working temperature : 250°C
Working pressure : 10 bars
Control system :
Regulation by industrial programmable controller and supervisor
|
|
Processing parameters with operational temperatures in excess of 600 degrees C and pressures of 68 Bar are available where processes require it. With heating options include electric, oil, steam or Aeroform’s patented, award winning gas fired Radiant Tube Heating Technology that offers energy cost savings of up to 70% over other forms of heating.
|
|
- Moulding press for composite parts for
the aircraft industry.
- Moulding press for carbon parts.
- Moulding press for PU-injection.
- Moulding press with
4 daylight performance.
|
|
| ... products without technical information |
| |
Internal dimensions :
Ø=1000 mm x L=1600 mm
Working temperature : 200°C
Working pressure : 10 bars
Control system :
By specific software and supervisor
|
|
Internal dimensions :
Ø=1500 mm x L=3000 mm
Working temperature : 250°C
Working pressure : 10 bars
Control system :
Regulation by industrial programmable controller and supervisor
|
|
Processing parameters with operational temperatures in excess of 600 degrees C and pressures of 68 Bar are available where processes require it. With heating options include electric, oil, steam or Aeroform’s patented, award winning gas fired Radiant Tube Heating Technology that offers energy cost savings of up to 70% over other forms of heating.
|
|
| ... products without technical information |
| |
|
Hot Sun BG S1P: Leather full flower nubuck and mesh microphone-ventilated, sole PU/TPU, textile antiperforation, lining nets 3D, end composite, without metal. Use for industry.
|
|
|
|
|
|
HELIUM Range : lightness, durability,safety all combined in a non-metallic footwear
With its new HELIUM range, Lemaitre Sécurité innovates to combine the advantages of “non-metallic” with high performance protection, comfort and endurance which underline LEMAITRE brand's success today.
Composite protective toe cap: ultra light, ultra resistant Thinner and more elastic than a plastic or steel toe cap it does not split into pieces in the event of a shock
Kevlar anti-perforation insert: light, flexible, unalterable, resistant to perforation over 100% of the surface of the sole
Non-skid sole with Parabolic® profile (an exclusive Lemaitre Sécurité patent). Among the advantages which set the HELIUM range apart:
Non-metallic
> Impervious to thermal variations and transfers from -10°C to 40°C
> Undetectable by security scanners
> Resistant to hydrocarbons and acids
> Exceptionally comfortable, without any concession to safety
HELIUM range is recommended for electronic industries, airports, clean rooms, logistics and automotive supplies industry, controlled areas in factories, outside job assignments, etc.
|
|
EN ISO 20345 S3
Composite non metallic toe cap to 200joule, lighter in weight and more comfortable
Non metallic midsole providing puncture resistance
Water resistant leather uppers
Rubber sole unit for excellent grip
Anti-static
Breathable moisture wicking linings for extra comfort
Soft padding around tongue and collar areas
Completely non-metallic product, so suitable for areas such as airports,prisons, bonded warehouses etc where security screening occurs.
|
|
An attractive shoe for both men and women who have to do a lot of walking, want to prevent tiredness caused by having to stand for long periods or handling heavy loads.
Low-sided safety shoe.
Upper: high quality water-resistant leather. Fastens with flat nylon fabric lace. Non-detectable trough metal detectors.
Sole: Lightane, fitted with concept 3A
Standard: EN 345-1 S3 HRO
Toecap: Xetane 200 J. FleXtane by Jallatte pierce-resistant insole and liner. 100% composite material, non-magnetic, does not conduct heat or cold.
Antistatic
Performance:
Safe 100% composite, lightweight.
Lightane sole resistant to heat, oil, acids and alkalis.
Seams kept to a minimum for better protection against splashes of harmful liquids.
|
|
An attractive shoe for both men and women who have to do a lot of walking, want to prevent tiredness caused by having to stand for long periods or handling heavy loads.
Low-sided safety shoe
Upper: perforated butt suede. Breathable, quick-drying 3D lining
Sole: Lightane, fitted with concept 3A. Resistant to Heat, oil, alkalis, acids.
Standard: EN 345-1 S1 P HRO
Toecap: Xetane 200 J. FleXtane by Jallatte pierce-resistant insole and liner. 100% composite material, non-magnetic, does not conduct heat or cold.
Antistatic
Performance:
Safe 100% composite, lightweight.
3D lining combined with perforated suede for all-round ventilation of the foot.
|
|
Code C 4428
Upper Printed leather, black color
Lining black color, absorbent, moisture wicking, high scratch resistance, anti-bacterial
Fussbett Removable, two layer, anti-static, soft latex foam inside
Sole Double density polyurethane, anti-static, non-slip, oil resistant, anti-corrosive
* Steel or Composite material crush-proof toe cap
* Steel or non metal pierce proof layer
Sizes composite material toe cap 36 to 47
Safety categories S1, S1P
Fit 11 MONDOPOINT
Conformity EN ISO 20345:2004
|
|
|
|
see the results for the following category : 
