|
|
Microwave heating and drying cabinet,
type VHM HEPHAISTOS
The newly developed microwave system, VHM HEPHAISTOS, is an internationally patented system and characterised by a very high field homogeneity.
The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance.
Advantages:
Reduction of production costs due to shorter heating, process and cooling times compared to conventional methods. Use of metal parts (e.g. metal tools and charging systems) possible in the microwave field
Specific volumetric heating of products; the furnace chamber itself is not heated
Sizes from laboratory up to large scale (e.g. aircraft industry) are available (working chamber volume of the shown systems 750 and 4200 ltr); other sizes upon request
Broad spectrum of use
Technical Data
Nominal temperature: 400 °C
Heating: microwave
Control system: S!MCON/32-Net |
|
We are specialized on manufacturing and marketing of screw compressors up to a capacity of 14,5 m3/min (512 cfm) and pressures up to 15 bar (215 psig).
Smaller machines can be mounted on horizontal air-receivers – ready to operate.
A wide range of accessories is also available, e.g. refrigeration and adsorption dryers, filters, air-vessels and others.
|
|
| ... products without technical information |
| |
ACI Air knife Systems are a cleaning, drying and cooling device used in both manufacturing and other processes. By creating a high intensity, balanced sheet of laminar airflow across the entire length of a component, an air knife has the ability to clean, dry or cool components, webs and conveyors..
The number of manufacturing applications suitable for air knives is bewildering. Typically they are used for cleaning, drying and cooling any type of surface ranging from cans and bottles to textiles and extrusions.
Examples:
• Removing residue water from bottles and cans prior to product labelling, ink jet coding and packing operations.
• In conveying systems air knives are used on continuously produced parts or products. In the Cement Industry ACI air knives can be used to remove dust and gravel from the conveyor. Rubber extrusion used in making seals for car doors and windows require a dip in hot salt potassium nitrate to give it a gloss. An air knife can be used to blow off the excess salt to restore the gloss.
• They can be used to remove viscous contaminants from a surface. Cutting oil used in the production of threaded metal rods can be blown away by an air knife.
|
|
| ITW Vortec's Curtain Transvectors are air amplifiers, which use a small amount of compressed air to produce a strong, high velocity, laminar sheet of air. Ionizing versions of the air knives effectively neutralize static while providing a powerful blowoff to remove accumulated dust, scrap, particles and contaminants on surfaces and finished products. The airflow delivers positive and negative ions to the surface to kill static cling to improve cleaning. Available for a broad range of manufacturing operations, the Curtain Transvectors efficiently handle high-speed drying applications and clean wide areas such as wood panels, laminates, sheets, films and other large objects or flat surfaces. The patented design significantly outperforms similar products in reduced noise levels and providing excellent uniformity of airflow. Compact and easy to install, Curtain Transvectors have no moving parts, provide instant on/off, and are offered in various lengths. Stainless steel models are available, ideal for applications where purity, high temperature or corrosive environments are concerned. |
|
Nex Flow™ air blade™ air knives are superior to competitive units for the following reasons:
- All our air knives are full flow which means they can be put end to end for continuous flow and takes up less space in tight areas. Even one competitor's so-called full-flow standard answer to our Nex Flow™ standard air blade air knife is not nearly as efficient as ours by their own published values and is only a small, flimsy version in comparison.
- All our air knives come with a stainless steel shim to maintain the gap for the compressed air to exit. Many companies use plastic shims which may be "squeezed" for uneven flow but more important, no matter how clean you make the compressed air line, the plastic will wear. Plastic shims is one of the biggest complaints customers have with air knives - Nex Flow™ however uses stainless steel shims as a standard in all air knives.
- Easy mounting. Some air knife designs are difficult to mount requiring them to be taken apart, often effecting flow and making the job of mounting more difficult. All Nex Flow™ air knives have convenient mounting holes.
- All Nex Flow™ aluminum air knives are anodized while many competitors do virtually nothing to the aluminum for protection. In fact, if you want any better protection they try to get you to by more costly stainless steel when simple anodizing is less costy and already "standard" with Nex Flow™.
- Flexibility in connections. Except for the very short lengths, both standard and X-stream™ versions have compressed air ports at the ends and the back for flexible choice in air input. |
|
The design of the tubes of Drying by Atomization DELAVAN, refers of it in the field of the Manufacture of Powder.
We to you propose a complete range of Haute-Pression tubes (SDX) and Bi-Fluids (Swirl-Air) |
|
By removing excess moisture from product, Key's Air Knife improves plant efficiency, reduces operating costs, and enhances product quality. The Air Knife features an over-line double air plenum with remote high velocity blower that provides both primary and secondary air curtains to strip moisture from product. The product momentarily stops as it flows to the primary air curtain, where it rolls, then proceeds forward for the final pass through the air curtain.
Common Product Applications
- Beans-green, wax, lima
- Berries, cranberries
- Broccoli, cauliflower
- Carrots
- Corn
- French fry strips
- Peaches, pears
- Peas-green, snap
- Vegetables |
|
• Blower/air knife systems engineered and “Guaranteed” for each application
• Air knives from 2" to 198" (5 to 502 cm) long, powered by Sonic Compact Blowers 3-50 Hp (2.2 to 37 kW).
• Sonic Rotary air knife and nozzle system (patent pending)
• Air Knife velocities up to 40,000 FPM (12,100 m/min).
• 75% Reduction in electrical use versus compressed air.
• Sonic Variable Temperature blowers (patent pending) deliver up to 200°F air temperatures without heaters
• Air cleanliness from 10 micron down to 0.1 (HEPA/ULPA).
• Blower & air knife enclosures.
• Quick release brackets for easy installation and product change over.
• Products are CE Registered with IEC motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order.
• Fill out the on-line questionnaire for a quote.
|
|
WindJet Air Knife Packages, complete with knives, regenerative blowers and package accessories, can be configured to your exact specifications. We also offer WindJet (Low Flow Air Knives that use compressed air.
|
|
In any dryer good mixing and efficient liquid-gas contact are of basic importance to assure rapid drying. The height of the dryer system is largely determined by the time required to dry the largest particle produced by the atomizer, while other important parameters are represented by the inlet-air temperature and the properties of the product being processed.
Spray drying has several advantages, the main one being the ability to handle heat-sensitive products such as food and pharmaceuticals. This is due to the fact that the drying process of a drop happens by loosing water on the external layers, and this keeps the inside material in the drop cool or at least protected against excessive heat. |
|
| Recent enhancements make our SprayDry nozzle better than ever. New features allow more user configurability, reduced maintenance time, improved wear resistance and more. |
|
The ACI air knives of Almeco replace the traditional compressed air systems for blow drying.
The air knives are more efficient and more economic than compressed air. the compact set-up makes it possible to fit the air knives into any existing system/production line.
The main advantages of the air knives:
- low energy consumption
- safe: pressure below 0.25 bar
- limited maintenance
- efficient for both small and big pieces
The air knives have repeatedly proven their worth and their rapid return-on-investment in the food industry, automotive industry, ... |
|
Paxton has designed and manufactured custom dryer blower systems for industry since the 1950's. Many of today's standard industry practices for "precision drying" and air knife design were pioneered here at Paxton.
Following are some of the key factors we consider in the design of your Air Knife system:
- The Air Knife system's objective(s).
- Direction of material flow and posture of the material: Horizontal / Vertical / Inclined
- Product temperature.
- Speed of the line.
- Arrangement of product or material on conveyor, i.e., single file, rows, etc.
- Dimensions of product(s) involved.
- Description of surfaces, including cavities and difficult areas.
- Conveyor dimensions .
- Temperature limitations, and heat sensitivity of materials.
- Drying requirement, and whether product is to be treated (dry, stripped, cleaned).
- Types of fluids involved (wash, rinse, treatments, coatings, acids, plating or printing). |
|
Drying locker for professional clothes. Closing by handle 1/4 of turn. To pose on the ground on feet jacks. Multiple punching of the lower part of the cell. Capacity from 2 to 3 complete equipments of work. Different specific models
230 V - 1100 Watts |
|
Drying with hot air (controlled) of the boots, shoes and gloves. Disinfection system per ozone generator. Startup manual or programmable. Two speeds of heating. valves closing system on each tube. Time of drying: between 20 min and 1H30. Model for 5, 10, 15, or 20 pairs. Model 10 pairs for gloves.
230 V - 16A - 550 to 2200 Watts |
|
Cupboard of drying out of stainless steel.
Manual or automatic Démarage.
Drying with hot air, system of recycling of the air. Programming of the startup and the stopping of the apparatus.
Allows the drying of a multitude of materials such as for example of the masks respiratoirs, the shoes, the gnats...
Cleansing by ozone generator.
Capacity from 30 to 70 pairs.
Conso 2000 to 3200 W in 230 V 50 Hz -
Drying cupboard
Also exist in version epoxy painting
|
|
Drying of the cuissardes to the hot air. Startup manual or programmable using a case of order with key closing. Ozone generator for the cleansing. Seal for a washing with large water. Removable tubes supports. Capacity 8 pairs. Stainless apparatus.
Food: 230 V - 3000 Watts
|
|
Film Applicator and Drying Time Recorder COATMASTER 509 MC III
Besides its function as a film applicator, this combined instrument also offers the possibility to evaluate the degree of dryness of 7 identical or different paint specimens simultaneously. Most versatile instrument due to a variety of accessories. Mobile control box with LCD to select the working movement, the operation mode as well as the working parameters. |
|
|
|
