|
|
|
|
|
|
Patriot Chopper/Saturator
The MVP Patriot™ Standard Output System delivers power, versatility and unprecedented precision to the composites production process.
3:1 or 7:1 output system
Highly Accurate Patriot Technology
Increased Efficiency
Improved Product Quality
Modular Versatility
The Patriot™ Chop/Wetout system delivers unprecedented presion, power, versatility and rugged construction for long lasting use, Rapid Access Design (RAD) for easy maintenance, and reliable performance. This is the one the other guys compare themselves to.
The Patriot™ Chop/Wetout system is a versatile pumping system that addresses many of the problems experienced in composites material application. If your goal is to make quality parts with minimal overspray and greatly reduce waste materials, then the precision of this system is what you need.
Precision counts. The key to efficient FRP production is achieving a uniform laminate. Precise metering is the key to correct many of the quality issues, such as porosity, inconsistent thickness and more that currently face composites manufactures. With a catalyst-to-resin variance ratio of 1% or less, the Patriot™ chop system runs circles around competitive systems that tested with variance ratios of 25% - 30%.
Superior Construction. The Patriot™ Chop/Wetout System features a deep induction heat hardened Fluid Section which is then coated with a thick hard chrome layer to increase the wear characteristics of the system, allowing it to run for longer periods.
Both the Fluid Section and Catalyst Pump on Patriot™ feature the new "self-healing" seal that has the lowest coefficients of friction available today. This seal does not require packing adjustments, and greatly reduces the problems associated with heat buildup and wear.
Patriot™ is designed and built with modular components to create the optimum configuration for your needs. Utilizing quick-change components extends the system life and allows for reduced down time. The major components change out in 10 minutes or less.
If you are looking to take your chopping operation to the next level, the Patriot™ Chop/Wetout System is the best move you can make.
|
|
|
This WOLFANGEL® unit was conceived for the processing of low viscose fluid plastics. In this case, a PU glue had to be dosed for the glueing of stone tiles. The processing pressure is about 100 bar as the glue has to go through a 7,5 m long material hose before being delivered to the processing head with a capacity of 5 kg/min. Due to the short pot life, the material cannot be heated for the reduction of the viscosity.
|
|
The M.V.P. Patriot™ High Output System offers a positive displacement pump design that delivers highly accurate ratio control of ±0.1%.
The secret to Patriot’s unprecedented precision is the unique pumping system. Patriot™ is a versatile pumping system that addresses many of the problems experienced in composites application.
|
|
For Applying:
epoxy resins
polyurethane resins
silicones
adhesives
Advantages:
-Smooth adjustable mixing ratio
-Exact volume and mixing ratio, no loss of material
-Optimum of industrial hygiene
-Avoid hazardous waste
-High precision dosing system
-Saving of time
-Easy to operate
|
|
|
This WOLFANGEL® unit was conceived for the vacuum infusion process, where, at the beginning of the process, a great amount of material is required. The capacity is 50 kg/min. Resin, catalyst and accelerator (or inhibitor) are delivered by 3 material pumps. The particular advantage of this plant is that it can process preaccelerated resin. The reaction process of the resin system can be adjusted to an optimum to the temperatures of the environment so that the possibilities of adjustment are improved compared to a preaccelerated system. This concept can also be used for epoxy dosing units.
|
|
Simple and Maintenance-Free, The Polaris System is Available in Four Different Pump Ratios for Spray and Pour Applications. You can choose from 8:1, 13:1, 22:1 and 40:1 Systems.
These systems are built TOUGH and feature DUAL 1.0 GPM or 2.0 GPM Stainless Steel Fluid Pumps with TRIPLE UPPER SEALS to Prevent Moisture Attack. In addition, Quick Pin Disassembly Provides for Rapid Pump Rebuild or Replacement.
The Polaris Processes Coatings, Adhesives, Polyurethane Foams, Polyurethane Elastomers, and Polyureas.
With the additon of optional line heaters, a hose heater and our Programmable Dispense Meter, This system becomes the Ultimate in 2-Component Dispense Technology.
|
|
|
|
|
|
RTM Attachment Included For Direct Injection .
Available in 2 Different Pump Ratios To Fit Your Exact Needs.
The 5:1, and 9:1 Systems Are Built To Last and Feature A
3.7 GPM Stainless Steel Fluid Pump.
System Is STANDARD Internal Mix; Complete With Catalyst Alarm &
Programmable Resin Monitor - AT NO EXTRA CHARGE !!!
With The Precision Of The "Phoenix 45" Airless Air-Assist Gun,
The "Atlas" System Is THE Choice For Your Standard-Volume Application.
The System You Need At The Price You Deserve...
This System Processes Your Neat Or Filled RTM Resin With Absolute Ease!
System Features:
- Phoenix 45" Internal Gun
- RTM Lite or RTM HP Nozzle Assembly
- Resin Pump Quick Pin Disassembly
- "UltraClean" Take Apart Accumulator
- Long Wearing Pump Seals
- "OptiSlave" Catalyst Slave System
- Micro-Adjustable Dispense Percentage
- Stainless Steel Catalyst Pump
- "No-Leak" Upper Seal
- Hardened Components
- Easy Access Control Valve
- Several Mounting Options Available
- Spare Parts Kit w/ extra Mix Nozzles
- 1 Year Warranty
|
|
Technical Data:
-Steel frame, zink plated
-Rollers
-Balancer
-Mixing block
-Pneumatic control
-Stainless steel piston pump
-Swivel boom made out of stainless steel
|
|
| ... products without technical information |
| |
The 236, 237, and 238 Source-Measure Units (SMU) are fully programmable instruments, capable of sourcing and measuring voltage or current simultaneously. These systems are really four instruments in one: voltage source, current source, voltage measure, and current measure.
Related Applications:
- MOSFET measurements
- GaAs measurements
- Bipolar measurements
- Diode characterization
- Oxide characteristics
- Electromigration testing
- Research and electronic manufacturing applications
|
|
High Voltage Power Supplies - rugged, compact, reliable instruments for just about any high voltage application.
With up to 20 kV output capability, a GPIB computer interface, and 0.001 % voltage regulation, these high voltage power supplies have become the industry standard.
There are several models to choose from, with outputs ranging from 1.25 kV to 20 kV.
|
|
|
With the ability to accept worldwide ac input voltages using eight different ac input cords and worldwide safety agency approvals, the NP family is the top choice in rectifiers. The NP family consists of a wide variety of scalable 48V building blocks including the NP0800, NP1200, NP1500, and NP2500 and a 24V building block, the NP1300. The NP0800, NP1200 and the NP1500 are 2 RU tall, while the NP1300 and the NP12500 are 3 RU tall. The rectifiers and shelf are also NEBS approved. Rapid customization of the rectifiers is possible with the use of Network Protocol Cards (NPC). A complementary shelf is also available that holds up to three modules.
|
|
|
|
|
|
The GX1838 provides 8 output channels and three Voltage Rails. Each of the 8 output channels can be connected to one of the three voltage rails or set as Open. Voltage Rails A through C are used as voltage sources for the High and Low state. Additionally, the GX1838 offers a programmable DC electronic load capable of loading up to 500mA. The GX1838 occupies a single 3U PXI slot.
The GX7400 is a dual output programmable DC power supply designed for use in PXI systems. The GX7400 occupies three 6U slots and is controlled via the PXI bus. The AC power is provided using a panel mounted receptacle. The power supplies are fully isolated and can be externally connected in series to provide higher voltage. Each of the dual outputs can accommodate a programmable or a fixed power supply module.
The GT7404 is a low cost method of providing controlled power to interface and test target circuitry. The GT7404 permits +5V, +12V, -5V, and -12V power outputs present on the GTXI motherboard to be switched through a DB25 connector for use by the unit under test and interface circuitry.
|
|
|
KSI offers cap charging power supplies tailored to meet your needs by configuring modular designs that are already very close to your exact requirements.
|
|
| ... products without technical information |
| |
- Paper Packaging at Unrivaled Speeds
Creates custom-length paper pads at up to 150 per minute – making it the fastest paper system on the market
- Versatile
Can be used in a variety of packaging techniques, including cushioning and blocking and bracing
- Environmentally Responsible
TigerPad™ material contains 85% Post Industrial and 15% Post Consumer recovered fibers equaling 100% recycled fibers
Patented, single-motor design results in lower power consumptions than other paper systems
TigerPad™ material is lofted, strong and durable requiring less material to provide “more” protective packaging performance
- Dependable and Durable
Requires minimal service, which means greater uptime and a more profitable packaging operation
- Effortlessly Integrate into your Current Operation
Ideal for workstations – materials can be taken straight from the system or batched into bins. Smaller footprint is easy to position anywhere
|
|
|
|
|
|
Fillpak® Voidfill System
FillPak® is a patented voidfill system that converts kraft paper at a very high speed into an economical, clean alternative to other voidfill materials. Single-ply, fanfold kraft paper is converted into a PaperStar? configuration, which is geometrically the most effective way to fill a void. FillPak is created through FillPak®, FillPak TT®, and FillPak MTM converters.
FillPak: EXTREMELY FAST AND EFFICIENT VOIDFILL
Fast - top converting speed is 55 inches per second
Versatile - integrates easily into a voidfill or pick and pack operation
Economical - more cost effective than other voidfill materials
Efficient - seven packs of paper can be stacked, taped together and converted for maximum uptime and throughput
FillPak TT: VOIDFILL WHERE AND WHEN YOU NEED IT
Fast - converting speed is 60 inches per second
Compact - designed for companies with multiple packing stations
Adaptable - can be converted into a battery operated unit when electrical outlets are not available
Versatile - can be easily configured as a floor or a table stand
Lightweight - entire converter only weighs 55 lbs. making it easy to move around
FillPak M: GOOD THINGS COME IN SMALL PACKAGES
Compact - minimal area for setup and storage; ideal for low volume or indiviual pack station needs
Clean - paper packing material is neatly guided into the box without any overfilling or spillage
Quiet - no motor makes the unit appropriate for non-industrial settings
Innovative - Ranpak's patented fanfold paper eliminates the "drag" experienced when using paper rolls
|
|
PadPak Cushioning System
PadPak® is a versatile product that can accommodate most packaging needs and applications such as cushioning, wrapping and blocking and bracing.
PadPak converters create cushioning pads from single or multi-ply kraft paper. Inside the converter, the paper layers are crimped together, trapping air inside the layers to form a cushioning pad. PadPak converters vary in size and configuration to accommodate any packaging environment or application. PadPak is created through the PadPak® AutoPad® , PadPak Jr.® , PadPak® Pad-N-Pak® Workstation or PadPak LCTM converters.
AutoPad®
A HEAVYWEIGHT FOR CUSHIONING APPLICATIONS
Versatile - several modes of operation allow for batch production or in-line, just-in-time use for most cushioning applications
Adjustable - converter is easy to rotate and is height adjustable to adapt to packing environment needs
Adaptable - multiple stand options and various accessories and customizations available
|
|
The new Easypack Spiral Pro™ is a high-speed motor driven version of the Spiral system producing tubular lengths of cushion void fill packing on demand.
High volume output is controlled by a foot switch with the flexible cushion material dispensed straight into the transit box.
The small, neat machine takes up minimum space so that every packing bench can have its own dispenser.
- Produced from 100% recycled and biodegradable paper
- Provides effective all round protection for goods using top, bottom and side fill
- Flexible tubes are easy to shape and form
- The tubular material is readily coiled to support heavy items
- The dispenser is fully adjustable for height, tilt and swivel
|
|
Epsilon™ is a cost effective system producing flexible, shock absorbing void fill and protective cushions from 300m rolls of single ply, 100% recycled paper. It generates a high bulk pack using the minimum amount of material.
The Epsilon™ system is suitable for both low and high volume users. Cushions generated from 300m length rolls of single ply paper make loading easy, and extend the time interval between roll replacement.
- Resilient paper cushions provide ideal all round protection and shock absorbing void fill for goods of any shape, size and weight
- Costs reduced by use of longer rolls of single ply paper with no need for total fill
- Environmentally friendly 100% recycled paper is recyclable and biodegradable
- Sturdy, high quality packs maintain their shape and resist compression, ensuring safe transit of goods
- Recycled paper does not mark polished surfaces
- Neat, clean packaging is readily unpacked and liked by people receiving the goods
|
|
|
The Meech Model 904 is a constant voltage power supply, designed to provide a 7kV source for Meech AC ionising equipment. It is adjustable to operate at 100-120v or 200-240v input voltages and is available in either 50Hz and 60Hz versions to suit local conditions. The 904 utilises a modified shape of output wave form and is uniquely designed to allow automated manufacture for increased reliability and extended product life.
|
|
|
The 977CM - Current Monitoring Pulsed DC Controller, brings together powerful long-range ionisation; closed-loop feedback; self-monitoring and remote reporting. A complete package, unique to Meech. Self-monitoring and adjustment of performance allows optimum control of static for much longer periods than previously possible. Local display and output signals alert operators to the need to clean the equipment.
|
|
|
The Model 233v3 Pulsed DC Controller has been designed to operate with the Series 200 range of ionisers for ESD applications. The 233v3 is light, compact and features lockable plug and socket connectors for quick release. It also provides the option of Steady State DC (SSDC) output.
|
|
|
The Model 977v3 Pulsed DC Controller has been designed to operate with the full industrial range of Meech Pulsed DC static elimination equipment. It is light and compact but able to cope with the most technically demanding industrial applications. In addition to the ability to control power output, frequency and polarity, the 977v3 also offers alarm and remote monitoring and control functionality. A new feature of the 977v3 is an 8- way DIN for connection of an ion balance sensor and feedback system. Patent No. ZL200530000278.0
|
|
Pfiffner mst
Revolutionary automatic lathe with fixed and sliding headstock with maximum flexibility for machining highly complex precision turned parts from blanks or bar stock.
* max. bar capacities 4/7 mm
* max. spindle movement 50/100 mm
* max. spindle rotating speed 20'000/15'000 t/min.
|
|
TRAUB single spindle bar automatics are suited for machining short parts with diameter up to 36 mm, no matter which level of complexity they have. Optimal accessibility, easy programming and powerful drives are only some of the features, which characterize the TNK series. The simulations use of maximum four tools provides a high productivity.
TNL26K
The fixed headstock version of the proven CNC sliding headstock technology TNL26,with a plus in benefits for economic machining of shorter parts:
- No guide bushing required, reduces setup time and tooling cost
- No precision material required
- Significantly shorter bar remnants
- Chuck work possible for machining of pre-machined or pre-formed parts
|
|
|
|
see the results for the following category : 
