|
|
Universal milling tools for Duro- and thermoplastics
HSC-end mill 1F GR - ZR - SR, HSC-end mill 2F GR - ZR - SR, 14 Grad, 30 degree, 45 degree, 55 degree helix, HSC-end mill Z3 GR, ZR, SR, 30 degree, 45 degree, 55 degree Drall
|
|
|
For GFK-/CFK-materials, reinforced materials foam materials. Standard serrations type N, type WD, type GR
|
|
General description :milling tool
For Sandwich-materials like foil - lack - wood - adhesive - aluminium.
|
|
|
For PA- and PE and similar materials, soft aluminium alloys. Extremly sharp cutting geometries for best surfaces without burr
|
|
Manual shape cutting
The P is a lightweight manual ultrasonic device allowing easy shape cutting on any type of synthetic textiles and nonwovens. This handy cutter performs very clean cuts, eliminates frays and creates consistent and clean edges.
Manual straight cutting
The T is an easy-to-handle manual device performing straight cuts on any thermofusible fabric.
|
|
| ... products without technical information |
| |
Compact Grinder for Edges and Corners
Features Overview
180 mm grinding width
Working speed: 2.800 rpm
Ideal for corner and edge grinding
|
|
Single Disc Grinding Machine
Features Overview
Grinding width: 250 mm
Special drive system for optimum load distribution
No need for manual finishing
|
|
TCG 500 Electric/Petrol
Grinding of concrete surfaces. (Shopping malls, hospitals...)
Removal of old coatings and contaminates. (Factory floors, car parks...)
Scarifying to remove oil/dirt surfaces. (Airports, car parks...)
Ice removal from cold store floors. (Food processing plants...)
Grinding Terrazzo floor tiles.
Grinding resinuous based coatings.
Smoothing and levelling concrete before applying a new coating.
|
|
To satisfy popular demand, VIC is manufacturing its own grinder and polisher that is highly productive, dependable and in-the-field repairable reducing down time and increasing profitability. Here are some key features of our system:
Key Features
High productivity
Flatter floors
Manufactured in the US at VIC International Corporation
Unique tilting head for easier diamond changing
Easier to load, unload and maneuver on floor
Designed to facilitate "in-field" repair
Built with readily available components
|
|
Standard feature includes self-propelled hydrostatic forward and reverse drive.
Suggested Uses
- Correcting Concrete Joints
- Slurry Cap Removal
- Lippage Removal
- Concrete Grooving for Anti-Slip
- Removal of Concrete High Spots
- Multiple Other Applications
Technical data
- Approx. Weight: 716 lbs
- Required Circuit: 460V
- FLA: 36/18
- Motor Output HP: 15 HP
- Cutting Width: up to 13", depending on number of blades and spacers
- Cutting Disc Dia.: 10"
- Length of Cord: 18 ft
- Cutting Disc Width Options: 0.110 x 10" (50 blades recommended)
|
|
Anti-Vibration Hand Grinder
Features Overview
180 mm grinding width
Heavy duty 2,4kW Hitachi motor
Quick release wheel guard
|
|
The newly developed side and face milling cutters with their sturdy, tangential and four-edged indexable inserts ensure a high machining volume (from 4 mm cutting width and above) for parting, slitting, slotting and trimming.
The new porcupine cutter family for shoulder milling and trimming is suitable for cost-effective machining of P, K, S and N materials.
Walter porcupine cutter F4038 / F4138 / F4238
High process reliability due to the firmly embedded front plates and large cutting areas
Extremely soft cutting action due to high positive cutting edge geometry
Milling without steps
|
|
SLOTTING TOOLS
Dathan also produces a range of slotting tools for use on gear shaping machines. These are usually used to produce forms that cannot be generated in the normal way. Combination tools can also be produced as the gold cutter below. This is a custom made generating and slotting tool designed to cut a splines in a part with large clearance areas and teeth with radial sides.
|
|
Features :
- Outstanding chip control through stagger tooth form and coolant thru holder.
- Vibration resistant carbide holder.
- Simple insert indexing through front mounted insert screw.
- T-Slot width per DIN 650 (a=10, 12, 14mm)
- Specials available upon request
|
|
| ... products without technical information |
| |
Gear Shaving Cutters. Gleason manufactures
and resharpens precision shaving cutters to
support Gleason Hurth shaving machines and
any other gear shaving machines. The
Gleason shaving cutter design is optimized
for maximum tool life.
|
|
|
Dathan disc type cutters can be designed and produced for cutting any type of gear, internal or external, spur or helical. They can also be designed to cut splines, serrations, sprockets or other involute forms. The cutters are full form generated using the Dathan 'pass thro' method. These cutters may be manufactured with bore diameters from 10mm to 120mm or ½" up to 4", cutter diameters (pitch circle diameter) from .75"(19mm) to 10"(250mm) and can be manufactured to any world standard or to any specified requirement.
|
|
SHANK TYPE CUTTERS
These are primarily designed for cutting internal gears, splines and serrations, both spur and helical. May also be designed for externals if required. These cutters are full form generated however small the pitch circle diameter (PCD) although strength of the cutter produced is the limiting factor. The strength and rigidity of shank type cutters is greatly improved by the Dathan ribbing method and is especially advised for those of small PCD.
HUB TYPE CUTTERS
Dathan hub type cutters are designed for cutting internal components where maximum rigidity is required. Hub type cutters are recommended for cutting long face widths or for coarse pitches.
In general terms, any tooth form, face width or number of teeth that is available on a shank cutter, can be manufactured with a hub type fitting. Note: these cutters screw directly onto the spindle of the machine therefore rely on the spindle being in a good true state.
|
|
STRAIGHT BEVEL GENERATING TOOLS
These are produced for Gleason machines, 24", 18", 12", 11" ,6" and 3" both roughing and finishing and also for Heidenreich and Harbeck machines, 15KH, 25KH, 26KH, 60KH and 75KH. These are manufactured as standard in M2 HSS, though tools in 5% colbalt steel can be supplied to order.
|
|
Convert now to cutting reliability at higher speed
At Sandvik Hard Materials we regard the cutting function as a single system that forms an integral part of the converting line. Using Sandvik CRC (Carbide Rotary Cutters), your converting line will face no restrictions in the cutting function (up to 1800 pieces/min).
Sandvik CRC are designed on the basis of a powder metallurgy process. The resulting material is both harder and stiffer with superior thermal conductivity compared with steel which makes cemented carbide ideal for rotary cutters. It is possible to resharpen the cutters several times during their lifetime.
|
|
Gear Milling Cutters
- Gear Roughing Cutters
- Circular-type Gear Profile Cutters with Form Indexable Inserts
- Roughing Cutters for Rotors with Indexable Inserts
- Rotor Profile Cutters with Inserted Blades
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
