|
|
|
|
|
|
The PILOT Premium from WALTHER PILOT is not only a new paint spray gun with a dynamic, ergonomic design, it is also a first-class „green gun“. The innovative HVLP-Plus nozzle/air cap system (blue air cap) guarantees high material savings while providing an outstanding surface finish. Tests carried out by the renowned Fraunhofer Institute in accordance with the EN 13966-1 standard confirmed transfer efficiencies of up to 88 %. These results make sure that the PILOT Premium pays for itself in a very short time.
Moreover new top-of-the-range model from WALTHER PILOT guarantees top-quality surface finishes while minimising overspray and protecting the environment.
• All wetted parts in stainless steel
• Large choice of nozzle-air cap systems: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 1.8 / 2.0 / 2.5 / 3.0 / 3.5 mm ø
• High quality gravity-feed cup with full-surface filter insert
• Up to 30 % less material used
• The spray gun is also available as a version for pressure tanks and pumps
• Spare parts are guaranteed to be available for 10 years
|
|
|
|
|
|
MVP's EMG-1000 external mix gun is ideal for your external mix gelcoat operations.
Light Weight
Ergonomic Design Reduces Operator Hand Fatigue
Solvent-Friendly
Created to endure harsh environments, the EMG-1000 Gun performs with legendary dependability. The EMG-1000 Gun features a replaceable head thread, stainless steel and aluminum construction, and an ergonomic design which relieves hand strain for the operator.
Magnum Venus Plastech's EMG-1000 external mix gun is ideal for your external mix gelcoat operations. The stainless steel and aluminum construction will stand up in rugged environments, and the ergonomic design relieves hand strain for the operator.
-Light Weight:
With fewer parts, the EMG-100 gun is significantly lighter than the competition.
-Ergonomic Design:
The EMG-1000 features an overall reduction in gun weight, balanced design handle and trigger, putting the weight of the gun further back over the hand for a distinct ergonomic difference.
-Solvent Friendly:
The stainless steel and aluminum design of the EMG-1000 makes this gun the ideal tool in rugged and harsh environments. Complete immersion in solvent will not effect the performance.
|
|
|
|
|
|
The ProGun Gun eliminates the needle and seat design, boosts cost savings and reduces emissions.
Internal Mix Technology
Low Pressure Delivery
Comfortable Design
Experience in the industry and documented research have proven that low pressure guns, like ProGun, significantly reduce emissions and porosity. The ProGun ensures that larger amounts of material reach the intended application surface instead of misting away or evaporating into thin air. Our large gun selection meets individual customer needs worldwide.
Magnum Venus Plastech' ProGun is one of the most versatile guns for use in the FRP industry. With low pressure and low emissions, thousands of operators have found their gun of choice.
-Internal Mix Technology
The ProGun utilizes the exciting
internal mix technology which cuts down emissions and material waste.
-Low Pressure
Using lower operating and catalyst pressures
than other guns, the ProGun dramatically reduces atomization.
-Comfortable Design
Featuring an ergonomic light weight design, with smooth pneumatic trigger action designed for better finger control, this gun is both efficient and comfortable to use.
|
|
Introducing The Revolution Internal Mix Air Purge Spray Gun
Offering the Advantage of Internally mixing resin & catalyst without the constant concern of gelling the gun. Its lightweight and simple design is the ultimate in Polyester Spray Gun Development
Features:
- Enviromentally Sealed Valve Components
- Single Operating Piston
- Air Purge Eliminates Solvent Waste
- Pneumatic Trigger
- Automatic Air Flush
- High Flow Passageways reduce Spray Pressure
- Self Adjusting Fluid Seals
- Low Emission, Non-atomized Spray Package
- Hardened Components
- Low Repair Costs
- Less Down Time
- Less Waste
- More Production
- Cutter Mounting Kit Available
- Accessor and Robotic Adapters Available
|
|
| ... products without technical information |
| |
|
The adhesive spray gun Maxi-ND-K is specially designed for processing dispersi¬on adhesives. All parts in contact with the material are made of stainless steel. Due to the low-pressure atomisation (system HVLP), a droplet ¬spectrum that facilitates optimum adhesions is generated. High application efficiency ensures good material exploitation. A large selection of nozzle sizes: 0.5/0.8/1.0/1.5/1.8/2.0/2.2/2.5 mm Ø is available. Owing to the shearing sensitivity of the spraying media, material transfer should occur without pulsation. For this reason, pressure tanks from WALTHER PILOT are the best solution. The tanks are available as standard in many sizes.
|
|
The universal adhesive spray gun PILOT III-K is exclusively suitable for solvent-based adhesives. In the automobile industry, the model PILOT III-K has proven itself many times, particularly in the manufacture of upholstery and in lamination. The body is coated with TEFLON® for comfortable cleaning.
Rotary jet nozzles are used so that the adhesives can be processed easily. Nozzle sizes: 1.0 / 1.5 / 1.8 / 2.0 mm Ø. The nozzle insert is designed such that material deposits on the air cap are avoided. PILOT III-K is available as a gravity-feed cup gun, as a siphon-feed cup gun, as a gun for pressure tanks or for connection to piston or diaphragm pumps. 10 years supply guarantee for spare parts.
|
|
FP-900 handguns minimize physical stress and fatigue when manually applying ambient temperature adhesives. Weight-supported design and ergonomic configuration allow operators to maintain a neutral wrist position. FP-900 handguns are ideal for gluing applications on flat panels in automotive, appliance and furniture industries.
Easily move left or right and in or out using the pivoting swing arm.
Spray patterns range from 1.0 to 6 inches wide (25 to 152 mm).
Design optimized for high-performance, ambient-temperature, moisture-cure materials.
|
|
The cold glue spray gun MZF is designed to air-atomized application of low viscosity fluids.
Solid and compact construction delivered with nozzle and air cap coated with antistick treatment.
On request this gun is available for solvent or acetate fluids
|
|
| ... products without technical information |
| |
|
|
|
|
Classic Dependability… Unrivaled Quality… Now Safer Than Ever!
The world’s most popular thermal spray gun just got better with our new built-in safety feature! Today, all companies know that good safety practices and a good safety record are good for their employee’s health and well being, and also good for their bottom line. With the new 16E Combustion Wire Gun, you get
peace of mind by knowing you have the safest wire combustion gun available and still have the rugged,reliable gun you’ve come to depend on.
• Reduces risk of injury and damage to components and facilities
• Release mechanism stops gas flow and wire feed
• Complies with the most stringent standards, including the latest
CE requirements
• Lightweight and comfortable to grip, even for extended periods of time
• Simple to light and easy to operate
• Steady, consistent wire feed of any type of wire with no electricity required
• Your choice of configuration for a wide variety of fuel gases and wire
diameters
• Uses the same parameters as the 14E spray gun
• Integrates into existing wire combustion systems with no additional changes
• Saves money on process gases with instant shut off on handle release
Free Training DVD Included!
|
|
F4MB-XL!
The F4MB-XL is the latest generation of Sulzer Metco‘s F4MB, which has been redesigned for improved robustness, yet retains all aspects of the F4MB that have made this machine-mounted, atmospheric plasma spray gun a customer favorite for decades.
What’s new about the Sulzer Metco F4MB-XL?
• New more rugged design lasts longer without major maintenance
• New left and right water/power cable connectors prevent accidental polarity
reversal
• New cable cover stands up to harsh spray conditions without cracking or
melting
What’s the same?
• Use your existing F4MB spray parameters without adjustment
• Tool center points and mounting hardware are identical to the F4MB
• Uses the same F4MB consumable gun components, injector holders and air jets?
|
|
|
|
|
|
Process Description
Plasma Spray is perhaps the most flexible of all of the thermal spray processes as it can develop sufficient energy to melt any material. Since it uses powder as the coating feedstock, the number of coating materials that can be used in the plasma spray process is almost unlimited. A high frequency arc is ignited between an anode (nozzle) and a cathode (electrode). Process gases (generally mixtures of argon, nitrogen, hydrogen and helium) flowing between them is ionized to become a plume of hot plasma gas with that exceed the surface of the sun of 6,600 °C to 16,600 °C (12,000 °F to 30,000 °F). When the coating material is injected into the gas plume, it is melted and propelled towards the target substrate.
Features of the Atmospheric Plasma Spray Process:
- Large choice of coating materials, including metals, alloys, ceramics, cermets, carbides and others.
- Coating systems are possible, using layers of different materials.
- Produces surfaces for a wide variety of applications, including resistance to many different types or wear and corrosion mechanisms, desirable thermal or electrical characteristics, and surface restoration and dimensional control.
- Excellent control of coating thickness and surface characteristics, such as porosity and hardness .
- No heat affected zone or component distortion.
- High deposition rate.
- High bond of the coating to the substrate.
- Coating of complex geometries.
- Easy masking of areas that should not be coated.
- Process can be fully automated.
- Coating of internal geometries possible
|
|
Crescocito CPR 08A
CRP 08A is a pilot air operated for precise control of paint supply.
Internal designs for optimum performance. Very low usage of cleaning agents/solvents needed per cleaning due to small internal volume and unique design.
All wetted parts made in high grade stainless steel for increased life time.
Large diaphragm diameter for high sensitivity and accuracy.
Dual diaphragms. Teflon diaphragm for fluid function.
Suitable for all types of paint materials, from water based to solvent and UV materials.
Many sizes and types of fittings for fluid connections.
Materials used in CPR 08A:
Housing: Stainless Steel
Cover: Aluminium with surface treatment
Fittings: Stainless Steel
Sealings: Perflour rubber, Teflon
Max working pressure: 8 bar
Size of paint hoses: 4,6,8,9,10,12 mm
Type of fittings: Straight or angled connectors.
Size of pilot air hose: 6/4 mm
Part number: 242 008 000
Approvals: CE, Atex
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
... see all the products in the category
Hoses
|
|
|
