|
|
|
The T4 was engineered for machining the largest size of aerospace structural parts.Carbon-fiber-reinforced plastic (CFRP) has been extensively applied to aerospace structural parts to reduce the weight of aircraft and improve their fuel economy. The use of titanium alloys has also been increasing recently because their coefficient of thermal expansion is compatible with that of CFRP. Machining productivity is extremely low for titanium alloys because their hard-to-cut nature limits the cutting speed owing to the relationship with tool wear. Makino has developed the T4 to improve machining productivity for these hard-to-cut materials. Typical machining applications for the T4 include edge frames and pylons.
|
|
Sturdy, accurate and absolutely reliable, the new TRIM series by Belotti is the show-piece of t-axis machining centers dedicated to the trimming of plastic and composite materials. Like the previous MKN model, the new TRIM machining center ensures extreme accessibility to the work area, so that the workpiece-holder template can be accessed without any problems.
The adjustment and working qualities of the TRIM series machining centers meet any needs fully in terms of machining speed and quality. Among the various optionals automated loading/unloading systems (rotary tables and parallel loaders) enable tooling the machining center quickly and saving precious time.
|
|
For materials like as Nomex, Kevlar, Aluminium usw.
Shafts / receptions.
Circle-knives.
Special-circular saw-leaves.
|
|
| ... products without technical information |
| |
|
|
|
|
NORDUC® tubes and connectors
The NORRES corrugated plastic protection tubes, NORDUC®, are highly flexible and liquid tight.
Applications
- for electrical installations, installation in switchboard plant, switch cabinets, mechanical engineering and robotics
- as suction and pressure hose for gaseous and liquid media
- for hydraulic and pneumatic hoses
- for moving machine parts
Properties
- highly flexible
- gas and liquid tight
- good resistance to alkalis and acids
- good resistance to UV and ozone
- kink-proof
- approved to UL94 (flame-retardant), partically up to fire class V0
- easy to cut through
- also available in large diameters
IP 68 to EN/ IEC 60529
Temperature Range
from -40 °C up to +135 °C (short time +150 °C approx.)
Construction and material
- corrugated full plastic tube; wall: high grade polyamide, polypropylene (PPmod) or polyurethane
Connectors
Our one-piece NORDUC® connectors are quick and easy to fit. They are vibration resistant and also available in stock in large diameters.
|
|
|
|
|
|
Plastic conduits and connectors
NORRES Plastic conduits, WELLFLEX, NORFLEX (PVC or Polyurethan) and NORPLAST, have the following characteristics:
- liquid tight
- highly flexible
Applications
- for electrical installations, installation in switchboard plant, switch cabinets, mechanical engineering and robotics
- as suction and pressure hose for gaseous and liquid media
- for hydraulic and pneumatic hoses
- as robust protection conduit
Properties
- highly flexible
- gas and liquid tight
- good resistance to alkalis and acids
- kink-proof
- interior protection against corrosion
- partially smooth interior and exterior (easy retraction of cables, easy cleaning of exterior surface)
up to IP 68 to EN/ IEC 60529
Temperature Range
from -40 °C up to +90 °C (short time +125 °C approx.)
Construction and material
- WELLFLEX® construction: wall thickness depending on diameter; wall: high grade soft PVC/ special premium ether-polyurethan (Pre-PUR®); spiral: plastic coated spring steel wire
- NORFLEX: wall: high grade soft PVC/ special premium ether-polyurethan (Pre-PUR®)
- NORPLAST: hard plastic spiral integrated in the wall; wall: high grade soft PVC: spiral: rigid PVC
Conduit connectors
NORRES can supply all standard connectors and thread profiles for the various hoses or combines them to form customised solutions. These connectors are tailor-made for our cable protection systems. Optimum compatibility and tightness are guaranteed.
|
|
|
|
|
|
* Flex IPCX neutral 3321 SUPERLUB® :
APPLICATIONS Where an higher mechanical resistance is required. It can be embedded under the floor, under plaster, in the ceiling.
MATERIAL PVC
COLOR Neutral
QUALITY MARKS IMQ, VDE
STANDARDS CEI EN 50086-1
CEI EN 50086-2-2
COMPRESSION RESISTANCE Class 3 medium (higher than 750N on 5 cm. at +20°C)
IMPACT RESISTENCE Class 3, medium (2 joule at -5°C)
MINIMUM TEMPERATURE RANGE Class 2 (-5°C)
MAXIMUM TEMPERATURE RANGE Class 1 ( 60°C)
* Flex IPC blue 3321 SUPERLUB® :
APPLICATIONS Where an higher mechanical resistance is required. It can be embedded under the floor, under plaster, in the ceiling.
MATERIAL PVC
QUALITY MARKS IMQ, VDE
STANDARDS CEI EN 50086-1
CEI EN 50086-2-2
COMPRESSION RESISTANCE Class 3 medium (higher than 750N on 5 cm. at 20°C)
IMPACT RESISTENCE Class 3, medium (2 joule at -5°C)
MINIMUM TEMPERATURE RANGE Class 2 (-5°C)
MAXIMUM TEMPERATURE RANGE Class 1 ( 60°C)
* Flex IPCN black 3321 SUPERLUB® :
APPLICATIONS Where an higher mechanical resistance is required. It can be embedded under the floor, under plaster, in the ceiling.
MATERIAL PVC
COLOR Black
QUALITY MARKS IMQ, VDE
STANDARDS CEI EN 50086-1
CEI EN 50086-2-2
COMPRESSION RESISTANCE Class 3 medium (higher than 750N on 5 cm. at 20°C)
IMPACT RESISTENCE Class 3, medium (2 joule at -5°C)
MINIMUM TEMPERATURE RANGE Class 2 (-5°C)
MAXIMUM TEMPERATURE RANGE Class 1 ( 60°C)
|
|
SUPERLUB® The internal lubricated surface makes easier to thread the cables, reduces the friction, overpasses the obstacles, avoid abrasion, crack and damages to electric wires.
APPLICATIONS
Where an higher mechanical resistance is required. It can be embedded under the floor, under plaster, in the ceiling.
|
|
Smooth inside, corrugated outside, double walled, protectiveunderground, large diameters conduits.
APPLICATIONS For cable conduits underground. Their flexibility an mechanical resistance allows installation even in the presence of irregularity of the ground.
MATERIAL HD, polyethylene high density.
High chemical and water resistance
COLOR Red.
Available also in green, yellow, black an blue on request with a minimum quantity of 2000m. per size/colour.
QUALITY MARKS NF-USE
STANDARDS CEI EN 50086-1
CEI EN 50086-2-4 (type N)
COMPRESSION RESISTANCE Higher than 450N on 5 cm. at +20°C
IMPACT RESISTENCE Type N (normal) at -5°C
3kg/h = variable with the size.
|
|
| ... products without technical information |
| |
The SOCO SYSTEM is designed to handle cases, plastic crates, trays plus many of the products inside.
The illustration shows a fully automatic packaging line consisting of the following standard SOCO SYSTEM modules: carton erector, 3-axis free arm robot, conveyors, carton sealer, pallet magazine, palletising robot and pallet stretch wrapper.
The modules can work together or as stand alone units.
|
|
Standard Roll Container 720 x 810 - Plastic base
Apart from the normal benefits of a Caddie roll container, the roll with plastic base offers the following advantages:
- light weight construction
- easy to maneuver
- quiet, low-noise design
A touch of color in the world of transport.
EP - H.1700
EP - H.1900
|
|
10003: Dollies for Crates 600x400 and 400x300 mm. Plastic yokes and Polyamide rollers 6 with rubber band
L.620, A.420 mm. Rollers 100 mm.
20003: Dollies for Crates 800x600 and 600x400 mm. Plastic yokes and Polyamide rollers 6 with rubber band
L.820, A.620 mm. Rollers 100 mm.
10013: Dollies for Crates 600x400 and 400x300 mm. Antistatic
L.620, A.420 mm. Rollers 100 mm.
|
|
| ... products without technical information |
| |
The J+J electric actuator is widely used in the plastic valve market because it has a plastic housing making it light in weight, and as it has more standard features than any of its rivals, offers exceptional value.
The new J3 Series electric actuators offer an LED status light and plug & play conversion kits that change the function from on-off to failsafe, or modulating, or both.
|
|
2-Way Poly KZValve (shown with KZCO's EH2 actuator)
VALVE FEATURES:
- Valve Sizes from 3/4" to 2" Full Port Single Valves
- Valve body available in poly or nylon
- Ball and Stem: 316SS
- Seat: Virgin PTFE
- Stem Seal: Dual VITON O-Ring
- Body Seals: EPDM
- Max PSI 150 @70F (Poly)
- Max PSI 300 @70F (Nylon)
- Wiring (most configurations available)
- FNPT or Flanged outlets available
- Quick Hairpin (QH)(1" Only)
ACTUATOR FEATURES:
- High quality, durable actuator housing rated NEMA 6P for waterproof applications and NEMA 7D for Ignition Protection applications
- 12/24 VDC and 24 VAC operation available
- Tough aluminum gear box with metal gears
- Actuator housing available with "indicator flag" or with "blank" lid
- Waterproof wire plug connectors
- Private labeling available
Consult our Engineering or Sales staff for application assistance.
|
|
The VKD is a True Union ball valve, particularly suitable for industrial applications, where high performances and long time reliability are a must.
The patented Seat Stop® system assures great longevity of the seals in situations where vibration or thermal expansion occurs. A micro-adjusting of the PTFE seals is also allowed.
As any accidental loosening of the ball carrier is not possible, the radial dismounting of the valve body can be done in full safety.
The new patented Dual Block® system allows a proper nut tightening, without any risk for unscrewing due to vibrations.
|
|
|
Cam-Line plastic-lined trunnion ball valves offer the same proven design benefits as the Cam-Tite product line, including tight shut-off, reliable stem sealing, and unsurpassed torque reduction—all unique features in a plastic-lined ball valve design. With special Tefzel or polypropylene linings and option PVDF coatings, Cam-Line ball valves are well suited for highly corrosive applications within the chemical processing industry such as sulfuric and hydrochloric acid.
|
|
The VKD is a True Union ball valve, particularly suitable for industrial applications, where high performances and long time reliability are a must.
The patented Seat Stop® system assures great longevity of the seals in situations where vibration or thermal expansion occurs. A micro-adjusting of the PTFE seals is also allowed.
As any accidental loosening of the ball carrier is not possible, the radial dismounting of the valve body can be done in full safety.
The new patented Dual Block® system allows a proper nut tightening, without any risk for unscrewing due to vibrations.
|
|
|
|
|
|
Rugged, Compact Design:
Hayward's rugged, low cost QIC2 all plastic PVC ball valves incorporate many design features found only on higher cost ball valves. Features such as PTFE seats, full porting and a 150 PSI pressure rating are all standard on every size of QIC2 ball valves.
Cost Sensitive Applications:
The QIC2 ball valve is perfect for OEM and other applications that require a reliable ball valve at an economical price. The QIC2 valve has been designed and tested to make certain it will perform year in and year out in the most demanding applications without leakage or failure. The internal components of the QIC2 ball valve are completely encapsulated inside the one piece valve body which means that the valve never requires adjustment. The QIC2 valve is ready to be put into service right out of the box.
Lightweight and Compact:
QIC2 lowcost ball valves are designed to fit into spaces too small for other valves. They are about 1/3 the overall size of a true union ball valve and they weigh an average of 50% less. This makes them ideal for skid mounted and other applications where space and weight are critical considerations.
Can't Rust, Won't Corrode:
Their all plastic construction means that they will never fail, stick, or jam because of rusted or corroded parts. And they'll work in places and environments where metal valves must be painted or coated just to survive.
|
|
|
|