|
|
The Filament Winding DL is a two-component continuous-flow programmable-ratio meter, mix, and dispense machine for filament winding. The DL will supply accurately mixed resin/hardener systems directly to in-line composite processes. It is designed to easily fit into any production layout.
Features:
- Continuous feed of premixed resin/hardener
- Precision gear metering pumps
- Touch pad programming of mix ratios and flow rates
- Choice of several tank, drum or totes feed systems
|
|
Technical Data:
-Stainless steel frame
-Switch cabinet with controler, pneumatic and mechanics
-Feed part A direct from suppliers 50 litre open topped straight sided rums, follower-plate unit with 360mm diameter
-Feed part B direct from suppliers 50 litre open topped straight sided drums, follower-plate unit with 360mm diameter
-Metering pump with drive unit mounted on follower plate A
-Metering pump with drive unit mounted on follower plate B
-Low level cut off for both components
-Three-phase current motor
-Electronic adjustable dispense rate
-Electronic mixing ratio adjustment
-Pressure lines 250 bar
-Mixing block with dynamic and static mixing
-Purge with one component
-Swivel boom for mixing block
-Follower plate unit and Unidos 300 TX/MP machine are based on a zinc plated steel base with rollers
-Potlife alarm, adjustable time
|
|
2-component metering- and mixing plant to process thixotropic core filler
Technical Data:
•Switch cabinet with controller, pneumatic and mechanics
•Feed part A direct from suppliers 20 litre open topped straight sided drums, follower-plate unit with 282mm diameter
•Feed part B direct from suppliers 20 litre open topped straight sided drums, follower-plate unit with 282mm diameter
•Potlife alarm
•Pressure display
•Three-phase current engine
•Manual gear box for smooth mixing ratio adjustment
•Electronic adjustable dispense rate
•Start / Stop trigger at mixing block
•Mixing block for disposable static mixer use
•Pressure lines 250 bar, free length 3 metres
•Follower plate units and machine are based on a zinc plated steel base with rollers
•Low level cut off for both components
•Precision stainless steel gear pumps
|
|
Technical Data:
-Aluminium frame
-Stainless steel cover
-Precision steel gear pumps
-Resin containers
-Adapter for disposable static mixer use
-Pump drive unit
-Mixing ratio adjustment by changing belt wheels
-High pressure tubes
-Output rate max. 800 g/min at a mixing ratio of 100:100
|
|
|
|
|
|
RTM Attachment Included For Direct Injection .
Available in 2 Different Pump Ratios To Fit Your Exact Needs.
The 5:1, and 9:1 Systems Are Built To Last and Feature A
3.7 GPM Stainless Steel Fluid Pump.
System Is STANDARD Internal Mix; Complete With Catalyst Alarm &
Programmable Resin Monitor - AT NO EXTRA CHARGE !!!
With The Precision Of The "Phoenix 45" Airless Air-Assist Gun,
The "Atlas" System Is THE Choice For Your Standard-Volume Application.
The System You Need At The Price You Deserve...
This System Processes Your Neat Or Filled RTM Resin With Absolute Ease!
System Features:
- Phoenix 45" Internal Gun
- RTM Lite or RTM HP Nozzle Assembly
- Resin Pump Quick Pin Disassembly
- "UltraClean" Take Apart Accumulator
- Long Wearing Pump Seals
- "OptiSlave" Catalyst Slave System
- Micro-Adjustable Dispense Percentage
- Stainless Steel Catalyst Pump
- "No-Leak" Upper Seal
- Hardened Components
- Easy Access Control Valve
- Several Mounting Options Available
- Spare Parts Kit w/ extra Mix Nozzles
- 1 Year Warranty
|
|
| ... products without technical information |
| |
Dispensing polyester resin and catalyst is easy with the Robinson Bench Mount Dispenser.
Resin and catalyst are pumped and dispensed by either continuous flow or shot size amounts in an unmixed state thus avoiding any need for flushing with a solvent.
Catalyst is pressure fed from a 10 litre S/S tank through Robinson's simple flowmeter system which is easy to see, easy to adjust and very low maintenance.
Resin flow per minute is controlled by the air pressure to the pump with low air pressure for low volume and higher pressure for higher volumes.
Dialing up the number of pump strokes gives an automatic dispensed amount of resin and catalyst.
For an accurate amount of resin and catalyst, use the Robinson Bench Mount Resin Dispenser Unit.
|
|
Features:
System Versatility:
Robinson's RTM Lite Dispensing Units are simple to use and because of the lightweight trolley is easily manoevered and transported.
Internal Mix:
Robinson spiral mixing head ensures 100% distribution of catalyst and resin resulting in high strength components.
Performance:
Using the very low pressure of the 4:1 ratio resin pump, outputs of 0.5Kg/Min are achieved.
Environmental Comfort:
Robinson's RTM Lite Dispensing Unit is a passive method of producing FRP components and by using accurately measured materials, wastage is eliminated giving a clean working environment. The non-spray application of RTM produces the lowest level of emissions possible.
Savings of Material and Time:
RTM production produces high quality and high turnover components. Under these production rates, wastage by other application methods is eliminated by using RTM/closed mould application. All the materials used go directly into the mould and nowhere else.
|
|
Moyno Grinders
400 Series Grinders
Moyno 400 series grinders offer constant, uniform, non-pulsating flow that provides low shearing action for minimum degradation of shear-sensitive materials and low velocity capabilities for effective pumping of viscous fluids.
|
|
NETZSCH M-Ovas® grinding systems can be used wherever it is essential that solid matter in fluids be broken down reliably to ensure the prevention of pipe clogging and damage to downstream equipment.
The special design of the M-Ovas® housing carries the solids in the wastewater flow to the cutting plate, where they are held and chopped by rotating blades. This low-maintenance assembly is designed for sludges with a maximum flow of 300 m3/h and a dry matter content of up to 7%.
Advantages of the NETZSCH M-Ovas®:
- high operating safety due to robust construction
- ease of operation and simple maintenance
- low operating costs through high operating efficiency
- optimal price/performance ratio
The NETZSCH M-Ovas® is primarily used in the following areas:
- Wastewater treatment
- Agriculture
- Slaughterhouses and recycling plants
- Canning/tinning factories
- Sugar factories
- Industrial kitchens
|
|
| ... products without technical information |
| |
... see all the products in the category
Shredders
|
|
To view pump drive product information, please select a series below. To learn more about the OEM applications that use pump drives
|
|
| ... products without technical information |
| |
Pumps may rotate or reciprocate. Rotating pumps are usually well balanced. Nevertheless their elastic support makes sense when these pumps are installed on the upper floor levels inside a building, since in this way vibration and structure borne noise can be avoided.
|
|
Originally designed for use with marine engines, this compact low
profile mounting is easy to install. It combines 3 way control of
the suspended equipment with relatively large static deflections
where the rubber is loaded in shear and compression.
The design incorporates bump and rebound control features
which limit excessive movements under shock loading. Top metal
cover gives protection against oil contamination and protective
finish resists corrosion attack. Propeller thrust on marine applications
is accommodated. There are four sizes in the standard range
with varying degrees of rubber hardness cater for point loads from
32 kg to 3000 kg. Natural frequencies as low as 8 Hz are possible.
Note: When used in marine engine applications with thrust forces
involved, the maximum load capacity is substantially reduced, see
table below!
|
|
EGA MARINE
Initially designed to be used for marine applications
that mount is commonly used too for both
static and mobile equipment such as:
Gen-sets
Pumps
Compressors
Marine engines
Industrial engines
They are fitted with a mechanical stop or failsafe (rebound).
That machine mount allows controlling vibrations
in three directions and guarantees different degrees
of stiffness in the three main axes.
The metal cup (Cover) gives a good protection
against oils, greases and corrosion.
Natural frequencies as low as 8 Hz are possible.
There are 2 sizes in the standard range with
various degrees of rubber hardnesses.
NEW: Available in stainless steel too.
|
|
| ... products without technical information |
| |
|
|
|
|
Multiformat vibrating bowl for perfume pumps : crimped pumps, crimpless pumps, screw-on pumps, clinch-on pumps (for deodorant cans), mini-pumps, drop dispensers / checkers.
Achieve high speeds without the use of air jets with the new generation of patented PKB vibrating bowls.
It is extremely easy to use and format changeover is very easy and quick using only one bowl for all of the different types of perfume pumps.
Benefits :
- high speeds : up to 160 units/minute
- no air jets : no compressed air, reliability, repeatable format changeovers, reduced noice, reduced operating costs
- great sorting quality and great respect for the integrity of the items being dispensed all due to the effective design of the specialized vibrating bowl, dedicated exclusively to perfume pumps dispensing
- quick and extremely simple format changeover, no bowl to change, minimal adjustments and tool use, easy to empty bowl
- multiformat universal rail guide
- 60-minute running time
- industrial production of all components particularly the format parts (100% manufactured)
- very robust, low maintenance.
|
|
Cartridge mounted mechanically balanced seals, manufactured in accordance with API 682 standards. These seals are designed for heavy duty applications and/or applications which are dangerous to both people and surrounding atmosphere.
They offer the best performance possible in terms of reliability and gaseous emission control, making them the ideal solution for petrochemical plants.
They are available as single or double seal construction in the various versions required by API Standards.
The metallic bellows designs are particularly suited to high temperature and/or corrosive liquids.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category : 
