|
|
* USBscope50 is a tiny PC based oscilloscope which connects via the USB port, combining the ease of use, portability and economy of PC based scopes with high performance normally associated with much larger bench oscilloscopes.
* USBwave12 is a new concept in USB function generator products. PC based function generators offer many user benefits including flexibility, ease of use and economy.
The USB interface has developed into probably the best and most widely implemented PC peripheral connection method and is a natural choice for the function generator.
* USBpulse100 is a new concept in USB Digital Pulse/Clock Generator products. PC based pulse generators deliver many user benefits including flexibility, ease of use and economy. They are an invaluable tool during design and debug of digital circuits and can be used to quickly test the behaviour of a circuit under different input frequency and duty cycle conditions.
* USBcount50 is a PC based frequency counter designed for maximum flexibility, ease of use and economy. It is an invaluable tool during design and debug of digital circuits and can be used to quickly to verify generated frequencies, pulse widths and duty cycles.
|
|
| ... products without technical information |
| |
IFR INECTION FLOW AND RATE
PRESENTATION
The IFR (Injection Flow and Rate) is a device for measuring injection volume on a stroke-bystroke basis.
It is particularly adapted for monitoring the high-energy multi-stroke injection systems found on modern diesel motors.
ADVANTAGES
- Instantaneous flow measurement of up to 10 injections/revolution.
- Real time display of the injection rate curve.
- Injection rate identical to the measurement given by a «rate tube».
- Analysis of the injection rate and time measurements.
- Mass measurement accuracy regardless of injection conditions : pressure, speed.
- Back pressure can be regulated from 5 to 100 bars.
- Injection measurement during 180° rotation from the pump (360° motor).
DEVICE STRUCTURE
The IFR system is made up of :
-a mechanical element including measurements of volume (mass), pressure and temperature.
-an electronic element which manages the measurement cycle and carries out all the necessary calculations at each revolution.
PRINCIPE DE FONCTIONNEMENT
The injected fluid is collected in an injection chamber maintained at a constant, static pressure. This injection back-pressure can be regulated from 5 to 100 bars.
The increase of the mass in the injection chamber causes an increase in the instantaneous pressure, providing an image of injection volume.
At the end of the injection cycle, the injected fluid is transferred into a volumetric measurement chamber which performs an accurate measurement of the total injected mass. The pressure signal from the first chamber is analysed to determine all the mass measurements, the time intervals and the duration of each injection.
|
|
| ... products without technical information |
| |
The HMP228 is a fast, reliable and accurate on-line detection system for water in oil.
Moisture measurements from lubrication oil can significantly cut maintenance costs and prolong machine lifetime. The HMP228 measures water activity and temperature from oil. In connection with oil, water activity measurement offers several advantages compared to the traditionally measured variable, parts per million (ppm). Water activity indicates directly whether there is risk for free water formation. The measurement is independent of the type, aging or temperature of the oil.
|
|
Humidity sensors from Measurement Specialties are designed to improve performance, reduce energy consumption and increase safety. In any environment where temperature affects performance, compensating for humidity should also be considered. Typical applications for humidity sensors include automotive, appliances, HVAC and medical.
Measurement Specialties recently acquired Humirel, a world leader in the design and manufacture of innovative humidity and temperature sensors. Humirel’s proprietary manufacturing processes, derived from the semiconductor industry, are strictly controlled to guarantee consistent output. A high level of automation in the board assembly process makes these humidity/temperature sensors ideal for high volume production required for large OEM programs. Humidity sensors are available as sense components, assemblies with voltage (analog) output or PCB modules for frequency (digital) output.
|
|
Humidity sensors from Measurement Specialties are designed to improve performance, reduce energy consumption and increase safety. In any environment where temperature affects performance, compensating for humidity should also be considered. Typical applications for humidity sensors include automotive, appliances, HVAC and medical.
Measurement Specialties recently acquired Humirel, a world leader in the design and manufacture of innovative humidity and temperature sensors. Humirel’s proprietary manufacturing processes, derived from the semiconductor industry, are strictly controlled to guarantee consistent output. A high level of automation in the board assembly process makes these humidity/temperature sensors ideal for high volume production required for large OEM programs. Humidity sensors are available as sense components, assemblies with voltage (analog) output or PCB modules for frequency (digital) output.
|
|
Humidity sensors from Measurement Specialties are designed to improve performance, reduce energy consumption and increase safety. In any environment where temperature affects performance, compensating for humidity should also be considered. Typical applications for humidity sensors include automotive, appliances, HVAC and medical.
Measurement Specialties recently acquired Humirel, a world leader in the design and manufacture of innovative humidity and temperature sensors. Humirel’s proprietary manufacturing processes, derived from the semiconductor industry, are strictly controlled to guarantee consistent output. A high level of automation in the board assembly process makes these humidity/temperature sensors ideal for high volume production required for large OEM programs. Humidity sensors are available as sense components, assemblies with voltage (analog) output or PCB modules for frequency (digital) output.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
YP11MVV80
These sensors are especially well suited for high speed indication of contrast differences by means of an analog output voltage.
Analog Output: 0...10 V DC
Switching Frequency: 10 kHz
|
|
CHARACTERISTICS - ORIFICE PLATE
Calibrated insertion diaphragm (concentric orifice) with
identification tag for mounting between flanges with
smooth waterproof surfaces.
The upper face of the entrance orifice plate is square
edged while lower face is in angle.
CHARACTERISTICS - RESTRICTION
ORIFICE
Calibrated insertion diaphragm (concentric orifice) with
identification tag for mounting between flanges with
smooth waterproof surfaces.
The upper face of the entrance orifice plate is square
edged;
Suitable to reduce pressure or flow in pipes.
APPLICATIONS
- Gases, vapours, corrosive and non corrosive fluids.
SPECIFICATIONS
- Material:
AISI-304, AISI-316, AISI-318, AISI-321, Alloy 400,
Alloy 625 Alloy 825, Alloy C-276, Titanium, PTFE,
etc...
- Maximum process temperature: depending on
material properties and use.
- Plate thickness: depends on inside Diameter and P
(differential pressure).
- Calculations:
BS EN ISO 5167-1, 2003, ASME, API, R W MILLER, L W SPINK.
|
|
For over 35 years, LDS Nicolet has provided state-of-the-art data acquisition solutions for the test and measurement community. Today, we are the world's premier provider of out-of-the-box, ready to use systems for a diversity of physical and electrical applications. The Genesis system builds on a reputation of high performance acquisition and signal conditioning by providing a flexible, cost effective platform to meet all data acquisition and transient acquisition needs. With the Genesis, LDS Nicolet introduces the future of data acquisition.
Based on the concept of a mainframe with plug-in modules, the Genesis offers a wealth of capabilities. Up to 128 channels can be installed within a rack mainframe (56 channels in the portable tower mainframe), and multiple mainframes can be combined to an even larger system. Up to 400 MegaSample memory per board allows for high definition transient capture. Built-in data transfer acceleration gives you an overview of MegaSamples of data within seconds. With the world's best performance signal conditioning and 16-bit accuracy, Genesis is the right solution for your difficult measurement task.
Genesis Features
Combines Transient Recorder and Streaming Data Acquisition Capabilities
Programmable High-Performance Signal Conditioning
Sample Rates from
200 kS/s to 100 MS/s per Channel
Transient RAM to 400 MS per card, 12.8 GB per System Max.
Tower Mainframe with 7 slots or Rack Version with 16 slots (see lower picture)
Master Slave Option for Synchronized Acquisition on up to 1080 Channels
Unlimited Recording Size and Duration
IRIG and GPS Time Code Options
Local SCSI Drive Storage for Safety Critical Applications
|
|
|
Rosenberger offers a wide product range for applications in industrial test & measurement such as RF high-precision connectors and adaptors, test accessories and test components.
|
|
HOLSTER BAGS
Practical in every detail.
Made-to-measure openings for easy access to controls, keypads or connectors.
Belt holsters can be rotated on the belt and can be removed quickly when required.
Ideal for small data entry devices. Also available in washable material.
|
|
|
Compact Torque Measurement Coupling - Contactless torque measurement | Integrated into a backlash-free shaft coupling | Simple electrical and mechanical installation | Robust and reliable machine element | Completely maintenance-free
|
|
STA 449 F1 Jupiter® – Simultaneous TG-DSC
Fascinating Flexibility in Thermal Analysis
The new STA 449 F1 Jupiter® combines unlimited configuration flexibility and unmatched performance in just one instruments.
● Thermal stability, decomposition behavior, composition, phase transitions, melting processes to be analyzed comprehensively and quickly
● Easily to use top-loading system with exceptionally precise balance resolution (25 ng resolution at a weighing range of 5g) and highest long-term stability
● Interchangeable sensors for DSC measurements with highest sensitivity and best reproducibility for reaction/transition temperatures and enthalpies as well as for measurements of specific heat
● A variety of optional system enhancements for ideal system adaption to user-defined applications
● Various furnaces, easily interchangeable by the user, available (optional a swiveling double hoisting device for two furnaces)
● Pluggable sample carriers (TG, TG-DSC, TG-DTA, etc.)
● Automatic Sample Changer (ASC) for up to 20 samples
● Automatic evacuation and refilling (Autovac)
● Plenty of accessories, e.g. sample crucibles in the most varied of forms and materials
● Unique for STA: temperature-modulated DSC (TM-DSC)
By supplementary MS-and/or FTIR-coupling even more comprehensive analyzes are possible.
All these features make the new developed STA 449 F1 Jupiter® to the ideal tool for thermal analysis of materials in the fields of research, developments and quality assurance.
|
|
EZ-ARRAYTM
The Banner EZ-ARRAYTM Measuring Light Screen system comprises an Emitter and Receiver sensing array. Its intended use is for detecting or measuring size and/or position of articles, components and parts etc. in control and/or sort operations.
Product highlights:
- Applications include edge and center-guiding, loop tension control, hole sizing, parts counting and on-the-fly product sizing and profiling
- Closely spaced infrared beams detect objects as small as 5 mm wide; edge resolution is 2.5 mm
- Controller functionality is built into the receiver, so basic setup requires no controller, software, or PC
- Easy-to-use software is included for advanced configuration, using a PC
- Configuration options include 14 measurement modes, three scanning methods, two analog and two discrete outputs and a serial output
- Range is 4 meters
- Array heights range from 150 to 1800 mm
|
|
BORALIGN® can answer your questions...
- Are the bores in line?
- Are the bores aligned to a shaft rotation axis? (e.g. boring machine)
- The offset and slope of the bore?
- The position of the bores relative to "guage points"?
BORALIGN® simplifies the task:
- True bore centre measurement - not just the straightness of bore sole.
- Saves time - Corrections can be performed simultaneously as measurement takes place.
- On-line Move function - for correction of individual points or alignment of housing to bore machines.
- Traceability - ISO9000 quality documentation of measurements can be printed to any office printer.
- Ease of set-up - lightweight components and laser technology makes equipment set-up simple.
|
|
• Pitot tubes Type L : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Body made of stainless steel.
• Pitot tubes Type L with TCK : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Pitot tubes type S with TCK : pitot tubes with TIG welding and protective tube made of stainless steel. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Air Flow Measuring blades DEBIMO : simple and cost effective method of providing permanent air flow measurement in rectangular or circular ducts. When used with a KIMO differential pressure device (pressure, transmitter, electronic micromanometer, liquid column manometer, differential pressure switch, ...).
DEBIMO air flow measuring blades ensure accurate indication, control or recording of air flow velocity and volume. Permit velocity measurements from 3 to 100 m/s (9 Pa to 10000 Pa).
|
|
Ranger Multiscan - Several feature images from one camera!
With Ranger in MultiScan mode you are able to acquire 3D shape, and intensity data such as gray scale, gloss, laser scatter and other important data simultaneously from one single camera.
All feature images are captured simultaneously when the object passes the camera in a line scan mode. The images are transferred to your PC via CameraLink or Gigabit Ethernet for easy system integration. The speed and performance is extremely high thanks to SICK IVP’s unique and patented sensor technology. MultiScan is the solution for any in line inspection task where 2D or 3D alone does not solve the problem.
You have to see the defect to detect it!
|
|
|
