|
|
| The ASM series (Advanced Signal Multi-scanner) offer a great time-saving automatic solution to calibrate multiple temperature sensors at the same time. The ASM series is an eight channel scanner controlled by JOFRACAL software on a PC. Up to 3 ASM units can be stacked to calibrate up to 24 sensors at the same time. It can handle signals from 2-, 3- and 4 wire RTDs, TCs, transmitters, thermisters, temperature switches and voltage. |
|
| ... products without technical information |
| |
Korenix JetCon1301 is a compact sized and rugged industrial fast Ethernet media converter with one 10/100M Fast Ethernet copper & one 10/100M single-mode or multimode fiber port. The power input range is either 18~27VAC or 18~32VDC. JetCon 1301 supports wide operating temperature from -10 to 70.
The JetCon1301 is world's first fiber Ethernet converter with pure converter mode design. Pure converter mode design guarantees the packet will never be lost with extreme short data forwarding latency. The pure converter mode design just forwards the signal to link partner without packet checking which is suitable for proprietary communication protocol such as EtherCAT. |
|
Combine a 100Mb Fibre Media Converter and a 2-port 10/100 copper Switch. Add in fibre port choices for all multi-mode and single-mode fibre connector types plus AC or DC input power selection and multiple application environments, and you have a new flexible edge-of-the-network Ethernet product: the CS14 Converter Switch. The compact package is ideal for network edge installations, and is able to be conveniently mounted to suit any application.
The CS14 regular-package units are for office and indoor wiring closet environments. The ambient temperature rating is 0C to 40C. A robust metal case with convection cooling is featured. Metal mouting clips are included, and rack-mounted tray options are available.
The CS14H hardened units are for factory floor applications. The ambient temperature rating is for industrial use. No internal air flow is required for cooling, so it resists dust, dirt, moisture, smoke and insects. Mounting option include stand-alone panel-mounting, DIN-Rail, or rack-mount tray.
The CS14P Premium-rated units are for temperature uncontrolled sheltered applications. Mounting options include stand-alone panel-mounting, DIN-Rail, or rack-mount tray.
Please visit our website for the full product information. |
|
For any user who needs a 10Mb fibre link connected to one ot two 10/100 copper devices, the "go anywhere" CSN14 Converter Switch is a versatile and handy solution.
The CSN14 family of Converter Switches, with a 10Mb Fibre port built-in covers the full range of application environments with regular (office), hardened (factory floor), and Premium-rated (outdoor) versions.
The CSN14 regular-package units are for office and indoor wiring closet environments. An external AC power supply for either North America (-d, 115vac 60Hz) or international (-i, 230vac, 50Hz) is included. The ambient temperature rating is 0 to 40C. It is convection cooled. Metal mounting clips are included, and rack-mount tray options are available.
The CSN14 Hardened units are for factory floor applications. It resists dust, sirt, moisture, smoke and insects. Mounting options include stand-alone panel mounting, DIN-rail, or rack-mount tray.
The CSN14 Premium-rated units are for temperature uncontrolled applications. In addition to a Premium-rated AC power option and jack, terminals for internal DC power choices at 8 to 15V, 24V or -48V DC are included. Mounting options include stand-alone panel-mounting, DIN-rail, or rack-mount tray.
Please visit our website for full product specifications. |
|
The JetCon 3401G, the industrial Gigabit Ethernet media converter, is equipped with a rugged aluminum alloy case with IP-31 grade ingress protection against
damages of solid objects or dust. With the excellent characteristics of heat dissipation, JetCon 3401G is capable to perform better than ordinary Gigabit Ethernet media converters which are enclosure by steel metal with various of heat dissipation holes.
Unlike those with a single power input, the real time redundant power backup on JetCon 3401G leads to the functionality of a real Industrial Gigabit Ethernet Media Converter with the non-stop transmission.
*Converts 10/100/1000TX to Gigabit Fiber
*Flexible SFP Fiber transceiver design
*Auto Fault Detection and Alarm
*Fault Alert for port and power
*Two way Link loss forwarding
*Power redundancy with wide range input
*IP-31 grade protection with wide range operating temperature
*1.5KV Hi-Pot testing passed |
|
JetCon2401 is a Multi-serial to fiber media converter which adopts RS-232/RS-422/RS-485 triple mode circuits with auto baud rate and direction control. It extends the serial signal link distance to 5KM (JetCon2401-m Multi-mode Optical Fiber) or 40KM (JetCon2401-s Single-mode Optical Fiber) and also provides good immunity of EMI/EMS.
To ensure nonstop transmission in hazardous environment, JetCon2401 supports wide operating temperature range, -20~70 model (JetCon2401).
Further more, JetCon2401 supports wide range power input (DC/AC) and DIN rail mount for quick and easy installation.
|
|
The optical networking features a safe datatransmission and is suited for example to transmit PROFIBUS, MODBUS-PLUS and many other manufacturer specific systems. These innovative systems can be realisedin bus-, star- or tree-structures as well as electric-optic mixed structures. Beyond this the systems are also able to transmit RS 232, TTY- or RS 422-Protokolls.
The systems of the d-Light series are mainly suitable for applications with high safetytechnical requirements for example in the climatic und air ventilation application used in tunnel ventilations or in the railwaytechnics.
As an important performance of the Transmission with POF, HCS, multimode or singlemode fiber optics obtains the ruggedness to electrical and magnetical interferences, the potential separation of transmitter and receiver as well as ranges to 40km between 2 fiber optic systems.
Trough the continuos expansion of our productportfolio the fiber optic centre of eks provides not only standard components and customer specific solutions. We allthough offer the fiber optic cabels and the packaging. The competent planningsupport of the eks fiber optic team from the project beginning until the realisation tops our Quotation - fiber optic from one hand - of our expanding company off. |
|
MRV provides a full range of media converters, unmanaged and managed, in stand-alone and modular form-factors. These converters cover all major networking protocols, including Ethernet, SONET and FiberChannel, and create fiber-optic links up to 130km on single-mode fiber.
Converts copper to fiber or Multimode to Single Mode
Compatible with numerous protocol standards, including Ethernet, SONET, and Fiber Channel
Provides distances up to 10km on MM, 130 km on SM
Low Temperature option operating at a wide temperature range (-45C to +60C)
|
|
APPLICATIONS
- Data transmission in a noisy environment
- Interface Insulation
- Remote equipment
- Interface adaptation
CONNECTIONS
RS232 :
- connector SUB D 9 pin femelle,
- connector block 3 pts TD, RD, 0V,
- Connector OF : SMA (ST in option),
- Power supply : connector block (2,5 mm2
AWG 12 max, length stripping = 8 mm)
RS232 INTERFACE
- Transmitted signals : transmit data and
receive data (TD, RD)
- Connection SUB-D 9 pin idem PC
- RTS looped to CTS and polarized to +V
- DSR looped to DTR and polarized to +V
- Signal DCD polarized to +V
- RS232 connection length : 15 to 20 m max |
|
Industrial Media Converters from Phoenix Contact are designed to be suitable for harsh industrial applications enhancing the overall reliability of your system.
DIN rail mountable media converters can isolate, extend and protect your data signals for use within hazardous areas (Class I, Div 2). |
|
| ... products without technical information |
| |
| These new fiber-optic amplifiers for mounting on DIN rails (DIN/EN 50022) are distinctive thanks to their narrow housing width of just 10 mm, which permits their optimum stacking in large numbers. The devices are further distinguished by their long sensing range, which extends from 0 to > 200 mm, depending on the optical fibers used (no blind zone). The operating distance can be adjusted between 20 and 200 mm. Adjustment is effected by means of a 12-turn potentiometer with an illuminated scale. The devices are simple to operate and feature an excellent switch-point stability as well as a high switching frequency of 1.5 kHz. The switching output can be set to either light- or dark-On directly on the device. Besides this, these fiber-optic devices have an aditional excess light output and are largely insensitive to environmental influences (IP 64). They are available with both red light and blue light (sensing range 0 to > 100 mm, adjustable from 20 to 100 mm). In addition, the Contrinex range also includes high-performance devices with sensitivity adjustment by teach-in. |
|
This light wave amplifier contains one (LWV-SE) or two (LWV-KS) optical transmitter and receiver.
The received signal will be amplified and coupled back into the fiber optic cable by the transmitter. Using these devices makes unlimited transmission paths possible.
In addition to amplifying we can realise a media conversion (e.g. Multimode to Singlemode). |
|
| The Smart Series is a full functionality DWDM EDFA featuring variable gain and transient control. These amplifiers offer powers up to 23 dBm, are available in pre-amp, line and booster versions, and feature mid-stage access with up to a 12 dB loss budget. |
|
Transmitters, Transceivers, and Transponders for Datacom and Telecom Applications
Finisar's broad product selection and innovative technology have made us the optical module manufacturer of choice for all major networking equipment vendors worldwide. We have taken a lead role in transforming the telecommunications equipment market from utilizing discrete optical components to leveraging the design and pay-as-you-grow flexibility offered by pluggable modules. Our products are fully compliant with Gigabit Ethernet, Fibre Channel, and SONET/SDH standards and operate at data rates up to 40 Gb/s and for distances greater than 200 km. They feature outstanding performance over extended voltage and temperature ranges, while minimizing jitter, electromagnetic interference (EMI) and power dissipation.
Finisar's Patented Digital Diagnostics
Finisar's XFP, XPAK, X2, 300-pin, SFP, SFP+, 2x6, 2x7, and 2x10 SFF and selected GBIC transceivers feature a microprocessor and diagnostics interface that provides performance information on the data link. Users can remotely monitor - in real time - received optical power, transmitted optical power, laser bias current, transceiver input voltage and transceiver temperature of any transceiver in the network. These digital diagnostic functions provide network managers with a highly accurate, cost-effective tool for implementing reliable performing monitoring. |
|
Communicate up to 15 kilometers with EIA-232 port-powered transceivers. Flexible, Long-Range Fiber-Optic Communication - Send serial data up to 15 kilometers (9 miles) using multi-mode optical fiber with standard ST connectors. Use data rates from 0-40,000 bits per second.
Easy Application - Plug transceiver/modem directly onto a standard 9-pin serial connector (DB-9). No special mounting is required. Receives power from the host device via the connector; no separate power supply or power wiring is needed. Order transceivers/modems with male or female DB-9 connectors. Use switch to select DCE or DTE standard pin configurations, and eliminate the need for adapters. Transmits continuous light pulses, for simpler testing with an optical meter. Apply with ST pre-terminated fiber cables. Secure and Reliable Data Transfer -
Maximum bit error rate (BER) of 10-9. Far less susceptible to EMI/RFI than copper links. Vertical Cavity Surface Emitting Laser (VCSEL) technology provides component isolation and low power consumption.
|
|
DESCRIPTION
The use of plastic optical fiber (POF) as a physical layer for 1394b (FireWire) is on the rise. Firecomms' FDK300S-101 Optical 1394b Transceiver Evaluation Kit allows the user to examine a data link over POF and to test the operation of the fiber optic transceivers.
This evaluation kit includes two evaluation boards, two multi-region DC power supplies and a 10 meter Step Index POF cable with SMI plugs at each end. Each board includes a Tx-Rx pair in an SMI socket. A CD
containing the data sheets and full design files for the PCB also is included.
The PCBs have been carefully laid out and tested to demonstrate the performance of the Firecomms 1394b Transceiver FDL300E/D over POF.
Each evaluation board carries the POF transceiver components in a through-hole SMI or IDB-1394 socket.
The electrical input and output lines from the transceiver are brought out to SMA connectors. The input accepts an LVDS/CML or PECL data source such as a Bit Error Rate Tester (BERT), Pattern Generator, or other signal source. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
