|
|
| The radio transceiver ARM-C8 complete the ARM radio modems range and offers a solution for all users who want a wireless function on their equipment. The versatile ARM-C8 features radio transmission that uses the license-free ISM bands: 868MHz (and 433MHz in option). The radio channel and the transmission power can be set by Hayes commands. The A.R.M. series enables link range from 1 to 2km in 10mW and a least 5km in 500mW. Very easy to integrate and to use, the ARM-C8 can operate in transparent or securized mode (serial port Baudrate up to 115200bps). The firmware includes most of all the current features required for radio transmission applications. The ARM-C8 is a small 64x32mm card to be directly solded on a PCB (12 points). The power supply is 5V (350mA max in 500mW Tx) or 3-3.3V with the low power version. |
|
Single channel transmitter and receiver
The CDP-TX-04S-R and CDP-RX-03BS/AS-R are a FM narrow band miniature transmitter and receiver set. The low-cost compact modules are designed to operate with low voltage and current consumption. The miniaturization of the CDP-TX-04S-R is of particular note as compared with other narrow band FM modules.
The receiver CDP-RX-03BS/AS-R provides very high sensitivity -120dBm(434MHz) which realize long operation range. |
|
RF line-of-sight range: 1,000m at 1,200bps and 600m at 9,600bps
RF effective rate: 1,200, 2,400, 4,800, 9,600, 19,200 and 38,400bps optional
Receiver sensitivity: -118dBm at 1,200bps and -114dBm at 9,600bps
Networking topology: point-to-point and point-to-multipoint
Frequency band: 868MHz (default) and 820 to 960MHz (customized)
Channel: 8 (default) and 16/32 (customized)
Interface: TTL/UART, standard RS232, RS485 optional
Antenna base: 50 ohms SMA
Voltage: +3.3 to 5.5V DC
Transmit current: <60mA at 10dBm, <80mA at 14dBm and <130mA at 20dBm
Receive current: <45mA
Sleep current: <5uA
Output power: 100mW (default) and 10 to 20dBm (10 to 100mW customized)
Operating temperature:
Industrial: -35 to +80 degrees Celsius (TCXO crystal)
Commercial: -20 to +60 degrees Celsius
Size: 47 x 28 x 7mm
Weight: 22g |
|
UHF Multi Channel Transparent Data Link
The TXL2 and RXL2 modules are 9600baud simplex multi channel OEM radio modems, operating on the European 433MHz ISM Band.
The TXL2/RXL2 pair act as a transparent serial cable to attached host. The TXL2/RXL2 will take care of preamble, synchronisation, bit balancing and error checking, along with automatic noise squelching.
Features
· Conforms to EN 300 220-3 and EN 301 489-3
· Serial modem baud rate at 9600bps (simplex)
· Addressable point-to-point
· 5 serial select wideband channels
· Transmit Power: +10dBm (10mW)
Applications
· In building environmental monitoring and control
· Remote data acquisition system, data logging |
|
Multi channel radio transmitter and receiver
The unique and compact CDP-TX/RX-02E-R is a frequency selectable radio data module for the 434MHz UHF band. Both CDP-TX-02E-R (transmitter) and CDP-RX-02E-R (receiver) are equipped with a frequency synthesizer system including microprocessor. 32 RF channels are selectable using an onboard 4-bit switch.
A 458 MHz version is available with 11 channels.
Its small size, low voltage operation, and frequency selectability make CDP-02E ideal for various applications in sites where many radio transmitters are operated.
8-pin frequency selection is available as CDP-TX/RX-02EP-R. |
|
This system enables two-way half duplex digital links over a range of up to 6Km.
It is used as an asynchronous serial channel where the useful data rate ranges from 0.2 kBps to 50 kBps Manchester.
These systems offer 9 transmission channels
These modules (miniature daughter boards to be integrated) are available in 4 versions
* Monochannel 433MHz / 868MHz or 915MHz
* 8 channels 433MHz - 10mW
* 9 channels 868MHz
* 1/2/5 channels 868MHz - 500mW for long range applications
They are in accordance with the European Directive EN 300-220 / EN 301-489
The applications covered range from point to point transmissions, industrial remote controls, remote sensors to cordless local networks... in both industrial sectors of activity: robotics, remote control, and in general public or tertiary fields: access control, home automation...
For any information : http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
Channel programmable transceiver
The UHF FM narrow band transceiver module STD-302N/N-R is suitable for industrial remote control and telemetry applications. Custom made SAW filters and narrow band technology provides reliable data communication in industrial applications where good interference rejection and practical range is required. Suitable for feedback systems. |
|
PERFORMANCE
Power Output: 27~30dBm
RF Line-of-sight Range: 2000m@1200bps,1000m@9600bps
RF Effective Rate: 1200/2400/4800/9600/19200/38400bps
Receiver Sensitivity: -118dBm@1200bps,-114dBm@9600bps
Supply Voltage: +4.75~5.5VDC
Transmit Current: <450mA@27dbm,<500mA@30dbm
Receive Current: <45mA
Sleep current: <5μA
Frequency Band: 868MHz(Default),820MHz~960MHz(customized)
Channel: 8(Default),16/32 (customized)
Interface: TTL/UART, standard RS232 and RS485
Size: 78mm×56mm×15mm
Weight: 45g
Antenna Base: 50Ω
Operating Temperature: -35℃~+80℃(TCXO crystal)
Frequency Stability: ±2.5ppm |
|
869MHz Wide Band FM Radio Transceiver
The BiM3B radio transceiver module is an enhanced higher power replacement for the European version BiM3A-869-64.
Two frequency variants are available in the European unlicensed band, one with 5mW RF power with no duty cycle restriction, the other with 25mW RF power with 1% duty cycle restriction.
Features
- Complies with European harmonised standards EN 300 220 and EN 301 489
- RF power output: +14dBm (25mW)
- Data rates up to 64kbps
- Crystal controlled PLL FM circuitry for both Tx and Rx
- Receiver Sensitivity: -101dBm for 1ppm BER (64kbps)
- Usable range up to 300 metres external, 75 metres in building
- RSSI (standard) or carrier detect option
- Analogue and digital baseband
- Low profile with small footprint
|
|
UHF Narrow Band FM Low Cost Multi Channel Radio Modules
The LMT2 transmitter and LMR2 receiver modules offer a multi channel,
low power and reliable data link.
Features
• Conforms to EN 300 220-3 and EN 301 489-3
• High performance double superhet. PLL synthesizer with TCXO
• Data rates up to 5 kbps for standard module
• Usable range over 1km
• Fully screened. Low profile
• Feature-rich interface (RSSI, analogue and digital baseband)
• Re-programmable via RS232 interface
• Operating frequency: 433.875-434.650MHz (EU band)
458.525 - 459.1MHz (UK band)
• Other custom UHF bands
• 32 channels
• Transmit power: +10dBm (10mW) / +20dBm (100mW)
Applications
• Data loggers
• Industrial telemetry and telecommand
• In-building environmental monitoring and control
• High-end security |
|
Modulation mode: QPSK
Method of spread spectrum: DSSS
Working frequency: 2.4 to 2.5GHz
Transmission power: 0dBm (1mW)
Receiving sensitivity: -92dBm
Interface: UART, TTL, 38,400bps and 8N1
Receive current: less than 33mA
Transmission distance: within the visible range, when the height of antenna is higher than 2m, reliable transmission distance is 100m
Power supply: 3.3 to 6.0V DC
Transmit current: less than 33mA
Working temperature: -40 to 80 degrees Celsius (industrial)
Dimensions: 38 x 33.4 x 3.5mm |
|
Eurotech Ltd offer a range of ZigBee enabled products to the mobile, industrial and military markets.
A standard ZigBee or 802.15.4 is an excellent choice for many low power, low data rate wireless communication applications. However, is it really for everything? There are situations where 802.11 WLAN works very well for high data rate traffic. Similarly, there are applications that require long range & more battery life. ZigBee protocols are relatively light with respect to demands on code space (32-70 KB) & have a moderate range (10-100m). These make ZigBee a good choice for Industrial & Home Networking. One of the big advantages of ZigBee is the %u201Cmesh%u201D capability. Mesh Networks allow messages to be passed from node to node such that if any of the nodes fail or drop out, the message can still reach its destination.
ZigBee Modules
1. nZB %u2013 suitable for Industrial Automation, Remote Control & Monitoring, Domotics, Remote Sensor Networking, Medical Equipment, Active RFID or localisation applications.
2. nZB Development Kit
3. uTOS %u2013 IEEE 802.15.2/TinyOS Module
4. ZStick %u2013 USB/ZigBee Stick
5. ZRouter %u2013 Router for ZigBee Mesh Networks
6. ZED %u2013 Multifunction ZigBee end device family with rechargeable battery
7. ModBee2400 %u2013 ModBus-ZigBee mesh network interface.
8. Zypad WL1100 |
|
| AUREL RF receivers are produced in accordance to RoHS European Directive and are identified with a -G- suffix to Manufacturing Code (Ex. 650200609G). |
|
Features :
- Laser Class 1
- Compliant with Small form Factor Pluggable MSA Specification
- Compact Size (13.3 x 49.8 x 9.8 mm / 0.52 x 1.95 x 0.39")
- Compliant with Industry Standard RFT Electrical Connector and Cage
- Available with either button release or bail release latching mechanism
- High-Performance and Cost-Effective
- Single +3.3 V Power Supply and TTL Logic Interface
- Low Power Consumption
- Metal Package for Superior EMI Performance
- EEPROM with Serial ID Functionality
- Enhanced Monitoring Functionality (Digital Diagnostics per SFF-8472 available)
- Standard and Wide Operating Temperature Ranges
Applications:
- SONET/SDH from 155 Mbit/s to 2.7 Gbit/s (OC-48, OC-12, OC-3, and STM-14, STM-4, STM-1)
- GbE (GbE-SX, GbE-LX, and GbE-ZX)
- FC (1GFC and 2GFC)
- Transmission distances from 500 m to 100 km
- Metropolitan and access systems
- IP routers and ATM core switches
- DWDM for Metro Area Networks |
|
| Designers can easily add cost-effective, short-range wireless data features to their products using the Toshiba family of low-power, high-sensitivity, single-chip radio transceivers and receivers. The devices offer frequency bands of 240 to 450 MHz, 900 MHz and 2.4 GHz. Each device is engineered to enable flexible and customized system designs reducing end-product and manufacturing costs. |
|
| Licensed radios from Phoenix Contact meet the most complex and demanding requirements in both point-to-point (PTP) and point-to-multipoint (PTMP) SCADA and telemetry systems. These digital data radio modems are configurable as a master, slave or repeater using the RAD-Link 400 software. |
|
Wireless audio transmitter and receiver
Transmitter WA-TX-01-R and receiver WA-RX-01A-R are RF modules that transfer audio (analog) signals in the 863-865 MHz European audio bands. All necessary circuits from RF parts to noise reduction systems are included in a compact case for easy integration in user applications. The modules have wide dynamic range (100 dB) achieving high quality sound transmission. The system uses a compander/expander noise reduction system. In addition, the outstanding features of WA-TX-01-R are its low voltage, low current and compact size. 4 channels are available for simultaneous system operation in one site. |
|
FC-201/SA Audio/Data RF module
Application:
¡ôWireless meter reading
¡ôIndustrial remote control and telemetry
¡ôAutomatic data collecting system
¡ôBuilding automation, safety and security, powerhouse equipment wireless monitor, entrance control system
¡ôPOS system, wireless keyboard, mouse
¡ôTraffic, under-well locating ,alarm
Specifications:
Modulation mode£º MSK
Carrier frequency£º UHF/VHF
Frequency stability£º ¡À2.5PPM
RF power£º 200mW /300mW optional
Channel Spacing: 12.5kHz/25kHz
Receiving sensitivity£º-119dBm
Interface data rate£º 1200¡«9600bps
Interface data format£º 8E1/8N1/8O1
Air data rate£º1200¡«9600 bps
Temperature£º-20¡æ¡«70¡æ(Ordinary)
-35¡æ¡«70¡æ(Industrial )
Power supply£º DC +3.6¡«+5.0V
Dimension: 61.5mm¡Á36mm¡Á12mm
Weight: 30g
Transmitting current£º ¡Ü200mA
Receiving current£º ¡Ü40mA
Humidity£º 10%¡«90%RH£¬non-condensing |
|
Versatile module with integrated µC and antenna
This module enables a two-way digital link up to a range of 1000m.
It uses the 863/870MHz band according to the European Directive RTTE EN300-220 / EN301-489.
This modem-module integrates a digital radio transceiver, a microcontroller and dedicated firmware.
Data transmission is performed via a UART serial interface.
The module is available either with a miniature antenna integrated in the PCB (for short-distance applications) or with the use of a wire remote antenna.
This compact MODEM-MODULE is very simple to integrate resulting in reduced marketing times.
It covers most applications requiring middle-distance communication, file transmission, professional thermal
regulation (industrial buildings, hotels), professional GPRS, middle-distance telemetering, digital or analog status translation….
Specific development on request.
DemoKit - Integration kit including : demoboard, module, RS232 cable, power supply available for this product.
* Evaluate the products
* Perform RF measurements
* Develop a prototype
For any information http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
Power Output:10mW@5V
RF Line-of-sight Range:1000m@1200bps,500m@9600bps
RF Effective Rate:1200/2400/4800/9600/19200/38400bps ex-factory
Receiver Sensitivity: -118dBm@1200bps,-112dBm@9600bps
Supply Voltage:+3.3~5.5VDC
Transmit Current: <40mA
Receive Current: <30mA
Sleep current:<20ƒÊA optional ex-factory
Frequency Band: 433MHz(Default),400MHz~470MHz(customized)
Channel: 8(Default),16/32 (customized)
Interface: TTL/UART(Default),RS232 or RS485 optional ex-factory
Size: 47mm*26mm*10mm
Weight:21g
Antenna Base: 50Ohm SMA
Operating Temperature:
Industrial:-35Ž~+80Ž(TCXO crystal)
Commercial:-20Ž~+60Ž
Frequency Stability:
}2.5ppm Industrial
}10ppm Commercial(}5ppm@1200bps) |
|
Wireless-based high-precision, 8-channel temperature measurement module;
requires WLS-IFC wireless gateway device
- 8 temperature input channels
- Supports thermocouples, RTDs, thermistors, and semiconductor temperature devices
- Superior performance - accuracy exceeds sensor output
- 8 digital I/O bits; user-configurable for alarming
- 802.15.4 wireless protocol
- Range: Up to 150 feet indoors, 2400 feet outdoors
- Included Software: TracerDAQ™, Universal Library, Universal Library for LabVIEW, and InstaCal
- Lifetime Warranty & Harsh Environment Warranty® included |
|
AMC335
Intelligent Synchronous WAN Communications Module
HIGHLIGHTS:
* Multipurpose Intelligent WAN Communications Module for AdvancedTCA® and MicroTCA%u2122 Systems
* Mid-Size Single AMC Module
* Full Compliance with AMC.0 R2.0, AMC.1 R1.0, and AMC.2 R1.0 Specifications
* Four High-speed Channels Capable of Sustaining 2 Mbps per Port
* Freescale%u2122 MPC8270 PowerQUICC II%u2122 Processor
* 128 MB Dedicated Processor SDRAM Memory
- Handles Extensive Onboard Traffic and Protocol Requirements
* 32 MB Application Flash
* NexusWare® WAN Protocol Software:
- Radar Receiver
- TADIL-B
- HDLC
- X.25
- Frame Relay
- ASYNC
* NexusWare® CGL OS and Development Environment
* Broad Operating System Support Includes Solaris%u2122, Windows®, and Linux®
The use of AdvancedTCA® and MicroTCA%u2122 systems for the aerospace and defense markets, as well as for telecom OEMs, will require high-density, highly advanced I/O solutions for use in these new environments. As a long-time contributor to industry standards and emerging technologies, Performance Technologies provides a combination of powerful hardware and advanced software that enables its customers to fully leverage AdvancedTCA and MicroTCA capabilities for the creation of high-density, high-performance solutions.
The AMC335 Intelligent Synchronous WAN Communications module provides four high performance synchronous/serial channels for WAN connectivity. This module is ideally suited for use in creating flexible and efficient radar gateways, radar recorders, protocol convertors, serial gateways, and front-end I/O elements as well as many other high-speed communications devices that require RS232, RS422 (RS449/EIA530), and V.35 connectivity. The AMC335 is part of Performance Technologies' industry-leading family of AMC solutions that include compute, storage, and video supported by powerful enabling software for embedded applications. |
|
This module enables a two-way digital link over a range of 300m.
Pre-certified, able to be used without a license, it uses the 863/870 MHz band and is certifiable according to the European RTTE Directive EN 300-220 / EN 301-489.
This modem-module integrates a digital radio transceiver, a microcontroller and dedicated firmware.
Data transmission is performed via a UART serial interface.
Its ease of integration, even for non RF specialists, thus limits technological risks optimizing the time to market at extremely competitive prices
This product covers most applications requiring short-range communication, payment terminal, home applications, thermal regulation, Traceability, “consumer market” intercom, automotive ...
DemoKit - Integration kit including : demoboard, module, RS232 cable, power supply available for this product.
* Evaluate the products
* Perform RF measurements
* Develop a prototype
For any information http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
For telemetry applications that do not have an adequate supply of electricity, the T-BOX line of low power and ultra-low power systems offers new capabilities for the remote monitoring of technical equipment.
T-BOX LP models can be powered by small lithium batteries or by a battery charged by solar panel, small wind generator, or any other external source. With unique standby/active algorithms for the processor, the T-BOX LP offers unrivalled operating performance on low power sources.
The system uses the infrastructure of the switched telephone network, GSM, or radio frequency, depending on the models and options.... |
|
| ... products without technical information |
| |
|
|
