|
|
COMPARTMENT SCREEN CPUC
Tilted roof
Front face, higher face and back face obtained in only one part for a total
sealing
Side faces: sliding panels in the slottings of 10mm of depth
guaranteeing nonthe water penetration at the time of washing
This double access right-hand side and left avoids the obstruction of the doors and the mechanical risks and facilitates the access to computer equipement
Compartiment screen CPU completely tight
COMPARTMENT PRINTER AND KEYBOARD
Access by shutter cutting down
Telescopic table, slide triple
development stainless charges 60 kg with safety position
Reserve of place mouse gun cab
|
|
•PROTECTION & SECURITY : maintaining the best protection against dust, bumps...
•MODULARITY : large compatibility to fit every hardware change (inside is fully adjustable).
•ERGONOMICS : screen is at 1.40m height and keyboard about 1m high (best ergonomics position to work standing up).
•MOBILITY : easily movable and high stability.
•SECURITY : highly stable and 360° visibility.
DESCRIPTION :
•Steel and composite movable container.
•Very resistant (20/10 steel structure).
•Easy access to front and back panels (2 doors).
•Overpressure inside the container for best protection (filtrated air system and heat extraction).
|
|
|
|
|
|
PERMANENT PROTECTION for workstations with a 14"
to 17" screen, data capture tray and keyboard.
DESCRIPTION:
- Sides in 10mm-thick composite material, self-coloured (white), complying
with hygiene standards in force
- Thermoformed monobox structure (rounded edges)
- Smooth surface for easy cleaning and to prevent accumulation of dirt
- Model also available for LCD screen: AGRO EC LCD
- Self-supporting structure for optional wall mounting
- Sloping top
- Sealed to IP 65
- Fire rating M1 self-extinguishing
FEATURES:
SCREEN COMPARTMENT
- Front protected by opening panel in 6mm-thick transparent, colourless
acrylic glass
- Sealed with compression bolts and peripheral joints in the housing,
in stained wood
- Closure with two compression bolts
KEYBOARD COMPARTMENT
- Independent of the screen compartment
- Compartment with white foldaway polyethylene tray with two runners
in the same material, and safety stops
- Thermoplastic hatch (10mm thick) sealing the compartment
- Cable sleeve for link between the two compartments
|
|
- Door with safety lock and polycarbonate glass. Useful dimensions 660x525 mm h.
- Suitable for monitor sizes up to 21". Internal dimensions of upper compartment: 690x600x580 mm h.
- Retractable keyboard shelf Useful dimensions 620x510 mm h.
- The lower compartment can be fitted with retractable and height-adjustable shelves for housing hardware systems and printers. Internal
dimensions 690x600x720 mm h.
- Cooling fan with dust filter.
- 4 channel cable duct.
- 5 socket electrical system with circuit breaker.
- Air inlet hole with dust filter.
- Intlet hole for network cables and outlet hole for power cable.
- Room temperature for use -5/+40 °C with humidity up to 50%
- Room temperature for use -5/ 20 °C with humidity up to 90%
|
|
- A 4" base with front access makes it easy to move with a forklift or pallet-jack when required. It is also possible to add casters and have the cabinet be mobile at all times.
- The 21 ¾" x 19" glass panel is demagnetized to avoid image distortion.
- The palm rest on the keyboard drawer provides good wrist support when consulting computerized data.
- The back panel provides easy installation of your computer system
- Built-in ventilator with filter to limit dust infiltration and reduce heat, allowing you to protect your equipment.
|
|
Computer & Documentation Stations
These stations are built to answer the ever increasing need for
documentation and I.T on the shop floor.
Document stations come a lockable drawer and full cupboard with
optional backpanel system.
Computer stations feature slide out keyboard drawers, full
cupboards, some with sliding shelves and a choice of open or
enclosed monitor areas.
Workstations
Perfect for supervisory or general workshop use, these units combine secure
storage with a sloping worksurface.
• Solid steel construction with reinforced doors
• Lockable cupboard with 2 adjustable shelves
• Lockable drawer
• Document retaining lip
All models are supplied with fronts in epoxy powder coat RAL5015
blue as standard. red, green, mid or light grey fronts are available as
a no cost option. Housing / shelves are RAL7035 light grey.
All prices include delivery to mainland U.K and are subject to V.A.T.
Delivery time in standard blue is 2-3 weeks
|
|
|
For the best protection of PC Blades and BackPacks, ClearCube recommends using a full cabinet enclosure. Cabinets come standard with a glass door that provides protection and Blade front panel LCD visibility. Each cabinet also includes adequate space for routing User Port and Ethernet cables.
|
|
Machine tool cabinets offer high storing capacity on a small footprint; they require little storage space and reduce installation costs.
Tools and operating materials are stored directly on location. Machine tool cabinets can ensure value conservation and effortless use of the valuable stored goods in the very best way. The cabinets are available with hinged or sliding doors
|
|
The computer cabinet is designed for protecting
computers against dust, knocks and bumps in industrial environments. The top part has an opening of 590 x 650 mm with lockable door fitted with a Plexiglas window, lockable, pullout keyboard shelf and mouse mat and a shelf.
The bottom part has an opening measurement of 590mm x 855mm with a single lockable door
|
|
The new dimension at the interface between man and machine for enhanced
- workspace
- safety
- ergonomics.
Industrial Workstations are more than just combinations of individual components. Individual customer requirements are achieved cost-effectively and to perfection.
Examples include compact solutions for scanner or laboratory workstations, individual worktops, combinations with the AP console system or Command Panel - there are virtually no limits to your creativity.
The concept is convincing because it is so simple: IW modules are equipped with climate control and electronic components, centralised security controlling, plus an extensive range of accessories, for a complete solution.
Perfect solutions from a single source. We develop and manufacture according to the principles of ergonomics and safety engineering.
|
|
INNOVATIVE PRODUCTS
- Monobox structure
- Sections made from 19mm composite extruded material, self-coloured
(white) and complying with hygiene standards
- Smooth surface for easy cleaning
- No sharp corners to prevent accumulation of dirt
- M1 self-extinguishing fire classified
- High mechanical strength eliminating any risk of condensation
or bacterial development
- High modulus of elasticity guaranteeing high resistance to pressure
and knocks
- High resistance to abrasion
- Sealing to IP 65
Access from the front:
- Opening/closing with sliding curtain made from articulated thermoplastic
sections (food quality) guided by 2 PVC runners with seals
- 2 handles for easy manoeuvring
- Closed curtain, sealed compartments with directional water jet or foam
cannon projections
Access from the rear:
- Removable panel, sliding vertically, giving access to the rear of the IT
equipment (cables, maintenance)
- 2 height adjustable trays (on vertical runners)
|
|
Standard PCs are increasingly used as control systems for machines, complex plants and installations. Protecting the main PC unit and the peripherals, e.g. printer and keyboard, from illegitimate access and from sources of pollution is the purpose of the PC Enclosure range. These systems conform to common safety requirements and provide the standard of easy and comfortable operation that has come to be expected. They also feature a range of concepts for heat dissipation.
- powder coated RAL 7032, front doors painted 7023
- robust industrial design
- complete pre-installation (ready for use upon delivery)
- front with three compartments, full-size door on back
- roof plate screwed tight (optionally raised, meeting IP 23)
- two-part bottom gland plate, 1/3 and 2/3, with patented rubber profiles for cable entry
- two mounted device carrier plates included in standard supply
- one pair of side panels also pre-installed
- multiple cable entry options
- appealing design
|
|
|
We offer an extensive range of products for industrial PCs to the ATX standard, from 482.6 mm (19") rack-mount versions in 1, 2 and 4 U, through to solutions for direct mounting on mounting plates.
|
|
BMX-R10 System
The BMX-R10 Mini-ITX System supports the Avalue EMX-M6901G Mini-ITX motherboard. The system features an onboard AMD 200U 1GHz processor, a 2.5” HDD drive bay, and supports up to 4GB of DDR2 SODIMM memories. The rear panel I/O ports include USB, VGA, DVI, COM, KB/MS, LAN, Audio and a DC-in jack. The front panel has a power status LED indicator. The BMX-R10 system has a metal, seamless, black chassis that can be wall mounted or stand on a desktop. It measures only 260mm in width, 186mm in depth, and 58.5mm in height. It uses a 60-watt power adaptor.
MBX-R10 Features:
Cost Effective Industrial Design
Rigid Metal Chassis
2.5” HDD Drive Bay
System Fan Inside
Design for Compact but Easy to System Configure
60W AC Adapter / 12 Vdc in
Mounting Bracket for Wall/Desk Mount Applications
|
|
Crash Cart Enclosures. The modularity of the DYNICS Crash Cart will allow you to essentially build your own "custom" box. Once the enclosure is specified with the Crash Cart Configurator, DYNICS will develop a drawing and then send for your approval ensuring that the appropriate solution has been created. Some of the Crash Cart features include:
- Painted Steel OR Stainless Steel Construction
- Rugged Modular Construction
- Configurable Cable Connections
- Gasketed Doors and Openings
- Lockable Front Doors and Keyboard Tray
- Swivel Touchscreen Display
- Non-Marking Caster Wheels
|
|
A frontal frame is mounted on the standard ARETA cabinet to form the
basis of this PC cabinet assembly.
|
|
"PRATIK PC" is a special configuration particulary engineered to accomodate industrial Personal Computer.
- The upper tempered glass door with handle allows the operator to look at the monitor.
- The lowest part, equipped with 19" rack mount frames or full-width separator shelves, is suitable to contain PC, UPS and/or printers. For safety sake this part is closed by a blind metal door with handle.
- The middle part contains a sliding shelf for housing the keyboard. This section has its own opening, in order that the operator can have access to the keyboard only.
Like all PRATIK cabinets, it has a rear metal door with lock and keys and metal side walls.
It is available in 1.795 (37U) and 2.018 (42U) heights.
Dimensions (width x depth): 640x640 or 640x800
|
|
PC 4650.000 with keyboard drawer
- Lock insert, lock no. 3524 E
- Swing-down front for handrest
- Mousepad support (also suitable for IP 67 mouse), may optionally be used on the left or right
- Hinged cable support
PC 4650.704 with desk section
- Cover plate top and bottom
- Designer strip made from plastic approved for use with foodstuffs
Material:
Stainless steel 1.4301
Enclosure: 10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane safety glass for screen diagonal 482.6 mm (19).
Surface finish:
Brushed, grain 240
Protection category
IP 55 to EN 60 529, NEMA 12 is met.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
|
A 3U-high chassis which houses up to eight PC Blades. Each Cage is a self-contained unit that provides all of the Ethernet connections, airflow management, and power required by the Blades. Up to 14 Cages (112 Blades) can be mounted in a standard 6' rack. A BackPack connects directly to the back of each Cage, and PC Blades slide in the front.
|
|
1U Industrial Rackmount
Model PRS-1174
19" 1U Height rack-mount micro-ATX based server with four drives
2U Industrial Rackmount
Model PRC-2193
19" 2U industrial rack-mount chassis for M/B version
3U Industrial Rackmount
Model AREMO-3194E
19'' 3U rack-mount chassis for ATX M/B platform(adopt PS/2 Power supply)
4U Industrial Rackmount
Model AREMO-4196
The Best Cost-Performance 19" 4U Height Pentium® 4 Processor Based Rack-mount Computer
5U Industrial Rackmount
Model IRC-750
19" 5U rack-mount CTI chassis with 6 drive bays
6U Industrial Rackmount
Model IRC-860
19" 6U rack-mount CTI chassis
Industrial Node Chassis
Model AREMO-6163
6-slot full-sized industrial node chassis (Shoe-box)
|
|
|
The range PAC is intended for difficult environments. This range can accept up to 8 cards (short or long) ISA, PCI, or PCIe. Products of this range have a systeme of blockage for every card and a filter with removable air for easy maintenance.Thanks to conectors, this PC could be defined according to your needs.
|
|
- 4U 19'' Rackmount Industrial Chassis for IPC or Mainboard :
- Rugged design constructed in 1.2mm Heavy duty steel and
it's a cost effective solution
- One 12cm lntake cooling for excellent cooling cycle and
comes with washable air filter
- Design for various industrial computer for networking,
communication applications and related solutions
|
|
Driver Bays 3 x 5.25ff Bay, 1 x 3.5ff Bay, 6 x 3.5ff removable sata HDD Bay
System Control Power Switch button, Host Power Switch button, Reset button, Keyboard-Lock button, DC Input
System Cooling Fan 6 x cooling fan
Power Supply Support ATX/PS/2 Power supply
Vibration 0.5g rms/5`500Hz/random operation
EMC CE/FCC Class B
Construction Heavy duty steel
Operating Temperature 0Ž`50Ž
Operation Humidity 5%`95%, 40Ž, no condensing
Dimensions 482mm~540mm~177mm (W~D~H)
|
|
one cabling solution for your equipment
- Ten sizes of cable ducting plus associated accessories.
- Optimal ducting sizes for maximum cabling capacity.
- Simplified installation:
- snap-off tongues for cable entry,
- 4 types of fixing accessories to suit the application: screw, clip-in, door mounting and chassis mounting.
- Important: no metal component parts enter the inside of the trunking, thus maintaining electrical insulation.
|
|
PAC-Xscale-12 The PAC-Xscale-12, industrial PC, includes a 12.1" display for applications requiring a larger, higher resolution display than our original industrial PC, the PAC-Xscale. It carries UL; Class 1 Div 2 (A, B, C, D); ATEX Class 1 Zone 2; and CE Mark approvals.
PAC-Xscale The PAC-Xscale, our smallest flat panel computer, offers versatility and durability to meet application requirements in any environment. With a 5.7" color TFT display, this industrial PC requires a minimum amount of space to perform.
|
|
| ... products without technical information |
| |
|
|
