|
|
- Door with safety lock and polycarbonate glass. Useful dimensions 660x525 mm h.
- Suitable for monitor sizes up to 21". Internal dimensions of upper compartment: 690x600x580 mm h.
- Retractable keyboard shelf Useful dimensions 620x510 mm h.
- The lower compartment can be fitted with retractable and height-adjustable shelves for housing hardware systems and printers. Internal
dimensions 690x600x720 mm h.
- Cooling fan with dust filter.
- 4 channel cable duct.
- 5 socket electrical system with circuit breaker.
- Air inlet hole with dust filter.
- Intlet hole for network cables and outlet hole for power cable.
- Room temperature for use -5/+40 C with humidity up to 50%
- Room temperature for use -5/+20 C with humidity up to 90%
|
|
- A 4" base with front access makes it easy to move with a forklift or pallet-jack when required. It is also possible to add casters and have the cabinet be mobile at all times.
- The 21 " x 19" glass panel is demagnetized to avoid image distortion.
- The palm rest on the keyboard drawer provides good wrist support when consulting computerized data.
- The back panel provides easy installation of your computer system
- Built-in ventilator with filter to limit dust infiltration and reduce heat, allowing you to protect your equipment.
|
|
|
For the best protection of PC Blades and BackPacks, ClearCube recommends using a full cabinet enclosure. Cabinets come standard with a glass door that provides protection and Blade front panel LCD visibility. Each cabinet also includes adequate space for routing User Port and Ethernet cables.
|
|
Features
EIA RS-310C 19" Rackmount Standard
Heavy duty Ni-plated steel, Black or Beige
Supports Full or Half-Size SBC
PICMG Backplane with optional 2 or 4 PCI slots for Expansion
(1) 5.25"/(1) 3.5" FDD/(1) 3.5" HDD
Lockable Front Door and Replaceable Air Filter
(2) 80cm Replaceable High-speed Ball Bearing Fans for Better Ventilation
300W/400W ATX Auto-switch Power Supply
Specifications
Construction Heavy-Duty Steel with Ni Plating
Color Black or Beige
Board Support Full or Half Size PIII/PIV Single Board Computer
Drive Bays (1) 5.25" (1) 3.5" FDD (1) 3.5" HDD
Expansion PICMG butterfly backplane with optional 2 or 4 PCI slots
Power Supply 300W/400W PS/2 ATX power supply (PFC optional)
Cooling (2) 80cm Ball Bearing Fans and replaceable air filter
Keyboard/Mouse Ports (1) PS/2 Keyboard/Mouse Port on Front Panel
Switch On/Off Switch; Touch-Free Reset Switch
Dimensions 430 mm(W) x 450mm(D) x 88 mm(H) / 16.69 x 17.7 x 3.5
Gross Weight 12.5 kgs /27.5 lbs
|
|
The RCK-606/608 6U Rackmount Chassis was specially designed for Computer Telephony Integration (CTI) and for fault tolerant server applications. The chassis provides two drive bays combination for different applications. RCK-606 supports four 5.25 + two 3.5 drive bays and RCK-608 supports two 5.25 + six 3.5 drive bays, suitable for RAID related applications. The combination of roomy space, separation of system boards and power supply plus three powerful 120mm fans ensures high reliability for any heat sensitive applications. Detachable card cage offer integrators the ease of installation and maintenance.
Features
Standard 6U 19 Rackmount Chassis.
Front Panel with Lockable Doors to Protect Drives
Two drives combinations : (4) 5.25 & (2) 3.5 or (2) 5.25 & (6) 3.5 drive bays for different applications.
Replaceable rear panel to support either backplane or ATX motherboard.
Replaceable power supply bracket to support both standard PS/2, dual PS/2 redundant power supplies.
Detachable card cage for easy installations and maintenance.
|
|
|
RCK-103MA is a rackmountable 1U chassis that supports practically all kinds of ATX motherboards and dual CPU server boards. The core of its cooling system is a 9 cm high-speed ball bearing blower and the design that allow efficient airflow to ensure excellent heat dissipation critical for heat sensitive applications. Retaining bar reduces board vibration significantly and enhances system stability and durability. RCK-103MA also supports hot-swap of HDD. With one 5.25" CD/DVD-ROM drive bay and two 3.5" drive bays with optional SCSI adapter with bracket for Ultra 160 SCSI HDD to support hot-swap function, RCK-103MA is an ideal solution for simple server, FTP, WEB, Mail or Firewall server, client server or data backup server.
|
|
EIA RS-310C 19" Rackmount Standard 4U height
Heavy Duty Steel with Ni plating
(10) 3.5" HDD and (3) 5.25" Drive Bays
Supports mini-redundant or PS/2 power supply
(1) 80mm and (3) 120mm high speed ball-bearing fans
|
|
The WMC-1004 is a full-length shoe-box wallmount industrial chassis for both SBC's (8-10 slot backplanes) and micro ATX motherboard. Its two-story modular design allows convenient installation of CPU boards and drivers while keeping the size of the chassis compact. Within its heavy-duty steel construction, it is equipped with two 5.25", one external 3.5" and one internal 3.5" drive bays for basic system requirements. To further enhance the unique design of the WMC-1004, (2) 9cm ball-bearing fans have been allocated especially for the CPU board to maintain the integrity of the higher speed processors. The WMC-1004 offers an ideal solution for computers in public areas or mobile computers where size is one of the main concerns.
Features:
Heavy duty steel construction shoebox industrial chassis can be mounted vertically or horizontally.
Two 5.25" and two 3.5" drive bays (one hidden).
Two 9 cm ball bearing fans with replaceable air-filter and one 8cm ball bearing fan.
Supports 8-10 slot backplane or micro-ATX
motherboard.
Supports PS/2 power supply
|
|
"PRATIK PC" is a special configuration particulary engineered to accomodate industrial Personal Computer.
- The upper tempered glass door with handle allows the operator to look at the monitor.
- The lowest part, equipped with 19" rack mount frames or full-width separator shelves, is suitable to contain PC, UPS and/or printers. For safety sake this part is closed by a blind metal door with handle.
- The middle part contains a sliding shelf for housing the keyboard. This section has its own opening, in order that the operator can have access to the keyboard only.
Like all PRATIK cabinets, it has a rear metal door with lock and keys and metal side walls.
It is available in 1.795 (37U) and 2.018 (42U) heights.
Dimensions (width x depth): 640x640 or 640x800
|
|
Standard Model 36U, 1800mm x 600mm x 800mm (HxWxD)
Upper front door with metacrilate window of 15'' and key lock; intermediate section with a drawer for keyboard and mouse and lower metal front door with key lock; e tray for monitor and another tray in the lower section. Top ventilation unit with 2 fans and thermostate. RAL Colour 7035-7004. Available options - Equipment support trays
|
|
|
The DS-M1 uses an ultra light, specially-made metal outer covering, while the DS-M2 features a highly rigid double-decked structural design. The inner layer of both cases utilizes the DS-M1s ultra light outer covering, while the outer layer of each case is finished in a magnificent polished ebony coating with the added protection of reinforced fire retardant plastics. Apart from their sleek elegance and precision, the new cases also effectively dampen noise from radiating fans inside during operation. The layout of ports at the back of the frame has further been designed for user-friendliness, allowing even elementary DIY users to easily identify and plug in ports.
|
|
|
We offer an extensive range of products for industrial PCs to the ATX standard, from 482.6 mm (19") rack-mount versions in 1, 2 and 4 U, through to solutions for direct mounting on mounting plates.
|
|
IPC-810A
19" rackmount, EIA RS-310C compliant
14-slot ISA/PCI/PICMG passive backplane
Provide 3 x 3.5" HDD bays and 2 x 5.25" HDD bays
The front panel contains power switch, CPU reset button, keyboard lock, power LED and HDD LED
Dust-proof and lockable door protects control parts.
With keyboard interfaces on the front and rear of the plane both
Anti-vibration bar for preventing the inserted card from vibrating
Support PS/2 power supply
Support ATX motherboard
Dimensions: 177(H) x 482(W) x 452(D) mm
|
|
A frontal frame is mounted on the standard ARETA cabinet to form the
basis of this PC cabinet assembly.
|
|
PC 4650.000 with keyboard drawer
- Lock insert, lock no. 3524 E
- Swing-down front for handrest
- Mousepad support (also suitable for IP 67 mouse), may optionally be used on the left or right
- Hinged cable support
PC 4650.704 with desk section
- Cover plate top and bottom
- Designer strip made from plastic approved for use with foodstuffs
Material:
Stainless steel 1.4301
Enclosure: 10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane safety glass for screen diagonal 482.6 mm (19).
Surface finish:
Brushed, grain 240
Protection category
IP 55 to EN 60 529, NEMA 12 is met.
|
|
|
The range PAC is intended for difficult environments. This range can accept up to 8 cards (short or long) ISA, PCI, or PCIe. Products of this range have a systeme of blockage for every card and a filter with removable air for easy maintenance.Thanks to conectors, this PC could be defined according to your needs.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
Standard PCs are increasingly used as control systems for machines, complex plants and installations. Protecting the main PC unit and the peripherals, e.g. printer and keyboard, from illegitimate access and from sources of pollution is the purpose of the PC Enclosure range. These systems conform to common safety requirements and provide the standard of easy and comfortable operation that has come to be expected. They also feature a range of concepts for heat dissipation.
- powder coated RAL 7032, front doors painted 7023
- robust industrial design
- complete pre-installation (ready for use upon delivery)
- front with three compartments, full-size door on back
- roof plate screwed tight (optionally raised, meeting IP 23)
- two-part bottom gland plate, 1/3 and 2/3, with patented rubber profiles for cable entry
- two mounted device carrier plates included in standard supply
- one pair of side panels also pre-installed
- multiple cable entry options
- appealing design
|
|
|
A 3U-high chassis which houses up to eight PC Blades. Each Cage is a self-contained unit that provides all of the Ethernet connections, airflow management, and power required by the Blades. Up to 14 Cages (112 Blades) can be mounted in a standard 6' rack. A BackPack connects directly to the back of each Cage, and PC Blades slide in the front.
|
|
| ... products without technical information |
| |
|
|
