|
|
PKM-400 e PKM-500
PKM series cabinets are made up of a main unit and tempered glass door.
Two product families belong to the PKM system, with different cabinet depths: PKM-400 and PKM-500.
The removable side walls allow the access to the rear cabling while at the same time guaranteeing securety since they can be removed only after the front door has been unlocked.
PKM-400
DEPTH 413 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0749 - h 360 mm - 6U
MAGN0750 - h 493 mm - 9U
MAGN0751 - h 626 mm - 12U
MAGN0752 - h 760 mm - 15U
MAGN0972 - h 1027mm - 21U
PKM-500
DEPTH 513 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0753 - h 360 mm - 6U
MAGN0754 - h 493 mm - 9U
MAGN0755 - h 626 mm - 12U
MAGN0756 - h 760 mm - 15U
MAGN0973 - h 1027 mm - 21U |
|
Permanent availability of your IT systems is undoubtedly crucial.
This is your company's heartbeat. For this reason, it is important to ensure stable conditions for your complex server and software system architecture. With this in mind, Rittal combines the five key elementary infrastructure components to create an extremely variable, and above all secure system:
Rack, Power, Cooling, Security, Monitoring & Remote Management.
With Rittal, a high level of IT availability is guaranteed. |
|
A frontal frame is mounted on the standard ARETA cabinet to form the
basis of this PC cabinet assembly.
|
|
PC 4650.000 with keyboard drawer
- Lock insert, lock no. 3524 E
- Swing-down front for handrest
- Mousepad support (also suitable for IP 67 mouse), may optionally be used on the left or right
- Hinged cable support
PC 4650.704 with desk section
- Cover plate top and bottom
- Designer strip made from plastic approved for use with foodstuffs
Material:
Stainless steel 1.4301
Enclosure: 10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane safety glass for screen diagonal 482.6 mm (19).
Surface finish:
Brushed, grain 240
Protection category
IP 55 to EN 60 529, NEMA 12 is met. |
|
The new dimension at the interface between man and machine for enhanced
- workspace
- safety
- ergonomics.
Industrial Workstations are more than just combinations of individual components. Individual customer requirements are achieved cost-effectively and to perfection.
Examples include compact solutions for scanner or laboratory workstations, individual worktops, combinations with the AP console system or Command Panel - there are virtually no limits to your creativity.
The concept is convincing because it is so simple: IW modules are equipped with climate control and electronic components, centralised security controlling, plus an extensive range of accessories, for a complete solution.
Perfect solutions from a single source. We develop and manufacture according to the principles of ergonomics and safety engineering.
|
|
CARDMASTER range is ideal for packaging instrumentation, measurement, monitoring and process control equipment. It provides two compartments - one for circuit boards and sensors with slots for printed circuit board insertion, and another one for terminal and wiring. All sizes are available in both polycarbonate and ABS.
Dimensions range from 166*160*80 mm to 390*316*167 mm.
PC: IP 65; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 65; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
Logstrup can provide a full customisation service to customer specification in painted or stainless steel.
The design departments in Denmark and Ireland have the ability to take a project from a concept stage to 3-D model, prototype and full production in a very short period of time.
This is facilitated by the use of the latest 3-D technology for drafting and modelling. Full CAD-CAM links to punching and bending work centres ensures fast reliable production of prototypes and volume production.
The company is currently a major supplier of marine bridge desks for primary navigation and ship management. These have been installed in some of the biggest commercial and private ships in the world.
|
|
Eta offers a number of RACK solutions to satisfy a majority of applications including:
19" swinging frames
19" fixed frames
19" rails
Double Hinge Boxes (CR)
- Swinging frames with solid rotation hinges are manufactured from sheet steel and offer outstanding strength and versatility. The rotation direction is reversible (left-right) and the opening angle varies according to cabinet width.
- Fixed frames are applied directly on the cabinet framework. Only for cabinet with 600 width.
- CR Box (Double Hinge)
CR Boxes have two sections. The central section is used for mounting 19" components whilst the rear section with mounting plate, can be used for assembling standard components. The front with silk-screened security glass offers excellent visibility and aesthetic. Door can be mounted left or right.
|
|
With a depth of 1000 mm, these cabinets are suitable also for housing very large servers.
The side panels come with ventilation flutes.
Available for both width 640 and 800 mm.
It is advisable to make use of a front and/or rear door with holes, to ensure adequate heat dispersion.
NEW!
It’s now available the special dimention 600 x 850 - 42 units, specially made for servers and to be positionned on floating floors!
WE ARE LOOKING FOR DISTRIBUTORS AND AGENT IN FREE AREAS, IF YOU ARE INTERESTED CONTACT US
|
|
Absolutely new , workable for small and medium offices where you cannot place a standard Server Rack 19" Cabinet due to space.
Dim. 600Lx1000Px650 12 Units
Code : MAGN1062 Colour Black Ral 9005
With this new solution you can solve all space problems in office , can contain also Servers with 800 depth.
This cabinet can be placed or under desk or in a corner of the office without be in the way , with a very nice styling .
Contact us for more information
We are also looking for Distributors and Agent for free areas, if you are interested contact us
|
|
Eldon's Upgraded Floor Standing ElRack Patch and Server Rack Series
ElRack just got better! Not only is the "one-rack-solution" to providing a variety of different mounting possibilities a real winner with the industry, but now with the newly released accessories available, ElRack truly becomes a real trend setter! Whether you need 19", 23", 24" or ETSI (metric) requirements, the ElRack%uFFFD copes with all sizes, as standard.
Dimensions available:
H: height from 21U (1000mm) to 48U (2200mm),
W: width 600mm, 800mm and 900mm,
D: depth 600mm, 800mm, 900mm, 1000mm and 1200mm.
The Elbox wall mounting range
Boasting a fresh, appealing design, the new ElBox patch box comes in 400mm, 500mm and 600 mm deep versions. While both the 400mm and the 500mm will be supplied as knock-down or flat-pack versions, the 600 mm deep model will be delivered pre-mounted at the factory.
|
|
Due to the hardness of the material, we recommend using metal multi-tooth screw
SZ 2486.300 for the interior installation.
Rittal Service:
TS stainless steel (1.4301) available in protection category NEMA 4x on request – please add extension .640 to the Model No.
Material / Surface finish
Material:
Stainless steel 1.4301:
Enclosure frame, roof, rear panel and gland plates: 1.5 mm
Door(s): 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure frame and gland plates: Bare
Door, roof and rear panel: Brushed on the outside,
grain size 240
Mounting plate: Zinc-plated
Supply includes
Enclosure frame with door(s), mounting plate, gland plates, rear panel and roof, 2 support strips fitted in the enclosure depth (only with depth 600 mm).
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
- Vertical masts, internal uprights and anchoring cross-beams in metal sheet steel, 2mm. thickness, upper and lower base 1,5mm. thickness, painted in RAL 7035 (smooth finishing)
- Tempered glass door according to UNI 7142 -(88) norm
- Rapidly removable side panels in pre-painted RAL 7035 sheet steel and protected by a key lock
- Ventilation flutes on both upper and lower areas
- Roof equipped to accept forced-air ventilation unit
- Possibility to install a second pair of 19" frames in the rear position
- Roof and base equipped with cable entry holes with sliding covers
- Ready for ground wiring
- IEC borings on 19" frame
- IP 20 protection degree according to EN 60529 norm
|
|
|
Logstrup can supply customised 19" rack solutions to suit all requirements. Heights, depths and widths are infinitely variable due to the three dimensional design of the Logstrup system. Racks can be designed in an open framework system to give total freedom of access or fitted with doors and plates to provide safety, security and a pleasing aesthetic finish.
|
|
|
The BackPack plugs into the rear of the Cage and connects the PC Blades to the User Ports and the network. BackPacks, in conjunction with ClearCube software, enable PC Blade sparing and IT administrative control.
|
|
- Door with safety lock and polycarbonate glass. Useful dimensions 660x525 mm h.
- Suitable for monitor sizes up to 21". Internal dimensions of upper compartment: 690x600x580 mm h.
- Retractable keyboard shelf Useful dimensions 620x510 mm h.
- The lower compartment can be fitted with retractable and height-adjustable shelves for housing hardware systems and printers. Internal
dimensions 690x600x720 mm h.
- Cooling fan with dust filter.
- 4 channel cable duct.
- 5 socket electrical system with circuit breaker.
- Air inlet hole with dust filter.
- Intlet hole for network cables and outlet hole for power cable.
- Room temperature for use -5/+40 °C with humidity up to 50%
- Room temperature for use -5/+20 °C with humidity up to 90%
|
|
- A 4" base with front access makes it easy to move with a forklift or pallet-jack when required. It is also possible to add casters and have the cabinet be mobile at all times.
- The 21 ¾" x 19" glass panel is demagnetized to avoid image distortion.
- The palm rest on the keyboard drawer provides good wrist support when consulting computerized data.
- The back panel provides easy installation of your computer system
- Built-in ventilator with filter to limit dust infiltration and reduce heat, allowing you to protect your equipment.
|
|
|
For the best protection of PC Blades and BackPacks, ClearCube recommends using a full cabinet enclosure. Cabinets come standard with a glass door that provides protection and Blade front panel LCD visibility. Each cabinet also includes adequate space for routing User Port and Ethernet cables.
|
|
The Rosenberger-OSI „Data-Center-Rack“ has been developed especially for FO patch distributors in data centers. In data centers the requirement for highest density becomes increasingly more important than in other cabling areas. To lead the through the very high density emerging large cable volumes professional and appropriate away from the patch fields, new cable management solutions are needed.
Advantages:
- installation of single data racks
- module system
- variable side wall and rear wall doors concept
- cable management system
- accessories
|
|
Features:
* Pre-assembled structure in aluminium.
* Quick mounting with 8 ¼ turn bolts.
*Accessibility from 4 sides.
* Flat pack packaging that reduces the transportation and stock cost.
*Absolutely reversible structure.
* Springswivel system which allows fast an easy assembly/ disassembly and changing of the opening direction without any tool.
* Standard option to customise the rack using different corner cap colours.
* Vertical and horizontal stock options.
* Easy installation and assembly in places with difficult access. |
|
. Management of the cables
. Modularity and Flexibility
. Capacity of resistance to the load up to 1.350 kg
. Invisible circulation of the cables
. 10 years guarantee
|
|
|
|
