|
|
Absolutely new , workable for small and medium offices where you cannot place a standard Server Rack 19" Cabinet due to space.
Dim. 600Lx1000Px650 12 Units
Code : MAGN1062 Colour Black Ral 9005
With this new solution you can solve all space problems in office , can contain also Servers with 800 depth.
This cabinet can be placed or under desk or in a corner of the office without be in the way , with a very nice styling .
Contact us for more information
We are also looking for Distributors and Agent for free areas, if you are interested contact us |
|
With a depth of 1000 mm, these cabinets are suitable also for housing very large servers.
The side panels come with ventilation flutes.
Available for both width 640 and 800 mm.
It is advisable to make use of a front and/or rear door with holes, to ensure adequate heat dispersion.
NEW!
It’s now available the special dimention 600 x 850 - 42 units, specially made for servers and to be positionned on floating floors!
WE ARE LOOKING FOR DISTRIBUTORS AND AGENT IN FREE AREAS, IF YOU ARE INTERESTED CONTACT US |
|
Eldon's Upgraded Floor Standing ElRack Patch and Server Rack Series
ElRack just got better! Not only is the "one-rack-solution" to providing a variety of different mounting possibilities a real winner with the industry, but now with the newly released accessories available, ElRack truly becomes a real trend setter! Whether you need 19", 23", 24" or ETSI (metric) requirements, the ElRack%uFFFD copes with all sizes, as standard.
Dimensions available:
H: height from 21U (1000mm) to 48U (2200mm),
W: width 600mm, 800mm and 900mm,
D: depth 600mm, 800mm, 900mm, 1000mm and 1200mm.
The Elbox wall mounting range
Boasting a fresh, appealing design, the new ElBox patch box comes in 400mm, 500mm and 600 mm deep versions. While both the 400mm and the 500mm will be supplied as knock-down or flat-pack versions, the 600 mm deep model will be delivered pre-mounted at the factory. |
|
Due to the hardness of the material, we recommend using metal multi-tooth screw
SZ 2486.300 for the interior installation.
Rittal Service:
TS stainless steel (1.4301) available in protection category NEMA 4x on request – please add extension .640 to the Model No.
Material / Surface finish
Material:
Stainless steel 1.4301:
Enclosure frame, roof, rear panel and gland plates: 1.5 mm
Door(s): 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure frame and gland plates: Bare
Door, roof and rear panel: Brushed on the outside,
grain size 240
Mounting plate: Zinc-plated
Supply includes
Enclosure frame with door(s), mounting plate, gland plates, rear panel and roof, 2 support strips fitted in the enclosure depth (only with depth 600 mm).
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
Eta offers a number of RACK solutions to satisfy a majority of applications including:
19" swinging frames
19" fixed frames
19" rails
Double Hinge Boxes (CR)
- Swinging frames with solid rotation hinges are manufactured from sheet steel and offer outstanding strength and versatility. The rotation direction is reversible (left-right) and the opening angle varies according to cabinet width.
- Fixed frames are applied directly on the cabinet framework. Only for cabinet with 600 width.
- CR Box (Double Hinge)
CR Boxes have two sections. The central section is used for mounting 19" components whilst the rear section with mounting plate, can be used for assembling standard components. The front with silk-screened security glass offers excellent visibility and aesthetic. Door can be mounted left or right. |
|
- Vertical masts, internal uprights and anchoring cross-beams in metal sheet steel, 2mm. thickness, upper and lower base 1,5mm. thickness, painted in RAL 7035 (smooth finishing)
- Tempered glass door according to UNI 7142 -(88) norm
- Rapidly removable side panels in pre-painted RAL 7035 sheet steel and protected by a key lock
- Ventilation flutes on both upper and lower areas
- Roof equipped to accept forced-air ventilation unit
- Possibility to install a second pair of 19" frames in the rear position
- Roof and base equipped with cable entry holes with sliding covers
- Ready for ground wiring
- IEC borings on 19" frame
- IP 20 protection degree according to EN 60529 norm |
|
| Logstrup can supply customised 19" rack solutions to suit all requirements. Heights, depths and widths are infinitely variable due to the three dimensional design of the Logstrup system. Racks can be designed in an open framework system to give total freedom of access or fitted with doors and plates to provide safety, security and a pleasing aesthetic finish. |
|
| The BackPack plugs into the rear of the Cage and connects the PC Blades to the User Ports and the network. BackPacks, in conjunction with ClearCube software, enable PC Blade sparing and IT administrative control. |
|
- Door with safety lock and polycarbonate glass. Useful dimensions 660x525 mm h.
- Suitable for monitor sizes up to 21". Internal dimensions of upper compartment: 690x600x580 mm h.
- Retractable keyboard shelf Useful dimensions 620x510 mm h.
- The lower compartment can be fitted with retractable and height-adjustable shelves for housing hardware systems and printers. Internal
dimensions 690x600x720 mm h.
- Cooling fan with dust filter.
- 4 channel cable duct.
- 5 socket electrical system with circuit breaker.
- Air inlet hole with dust filter.
- Intlet hole for network cables and outlet hole for power cable.
- Room temperature for use -5/+40 °C with humidity up to 50%
- Room temperature for use -5/+20 °C with humidity up to 90% |
|
- A 4" base with front access makes it easy to move with a forklift or pallet-jack when required. It is also possible to add casters and have the cabinet be mobile at all times.
- The 21 ¾" x 19" glass panel is demagnetized to avoid image distortion.
- The palm rest on the keyboard drawer provides good wrist support when consulting computerized data.
- The back panel provides easy installation of your computer system
- Built-in ventilator with filter to limit dust infiltration and reduce heat, allowing you to protect your equipment. |
|
| For the best protection of PC Blades and BackPacks, ClearCube recommends using a full cabinet enclosure. Cabinets come standard with a glass door that provides protection and Blade front panel LCD visibility. Each cabinet also includes adequate space for routing User Port and Ethernet cables. |
|
The Rosenberger-OSI „Data-Center-Rack“ has been developed especially for FO patch distributors in data centers. In data centers the requirement for highest density becomes increasingly more important than in other cabling areas. To lead the through the very high density emerging large cable volumes professional and appropriate away from the patch fields, new cable management solutions are needed.
Advantages:
- installation of single data racks
- module system
- variable side wall and rear wall doors concept
- cable management system
- accessories
|
|
. Management of the cables
. Modularity and Flexibility
. Capacity of resistance to the load up to 1.350 kg
. Invisible circulation of the cables
. 10 years guarantee |
|
Features:
* Pre-assembled structure in aluminium.
* Quick mounting with 8 ¼ turn bolts.
*Accessibility from 4 sides.
* Flat pack packaging that reduces the transportation and stock cost.
*Absolutely reversible structure.
* Springswivel system which allows fast an easy assembly/ disassembly and changing of the opening direction without any tool.
* Standard option to customise the rack using different corner cap colours.
* Vertical and horizontal stock options.
* Easy installation and assembly in places with difficult access. |
|
PKM-400 e PKM-500
PKM series cabinets are made up of a main unit and tempered glass door.
Two product families belong to the PKM system, with different cabinet depths: PKM-400 and PKM-500.
The removable side walls allow the access to the rear cabling while at the same time guaranteeing securety since they can be removed only after the front door has been unlocked.
PKM-400
DEPTH 413 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0749 - h 360 mm - 6U
MAGN0750 - h 493 mm - 9U
MAGN0751 - h 626 mm - 12U
MAGN0752 - h 760 mm - 15U
MAGN0972 - h 1027mm - 21U
PKM-500
DEPTH 513 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0753 - h 360 mm - 6U
MAGN0754 - h 493 mm - 9U
MAGN0755 - h 626 mm - 12U
MAGN0756 - h 760 mm - 15U
MAGN0973 - h 1027 mm - 21U |
|
| The new Internorm Stil desktop enclosure system is the innovative enclosure solution for the 19" sector. All space-optimised versions are based on the Interzoll module mounting rack programme and offer excellent value for money. Different front elements give the Internorm Stil its own individual and functional design. The enclosure variant with integrated ventilation (2 x 1/2 U) provides increased heat dissipation and is one rack unit higher on the outside. All standard models offer good EMC screening, which can be increased even further by the use of additional components. |
|
Dimensions acc. to IEC 60297 or IEEE 1101.1, Aluminum or sheet steel versions, up to superior EMC level. Large selection of assembly options.
|
|
Permanent availability of your IT systems is undoubtedly crucial.
This is your company's heartbeat. For this reason, it is important to ensure stable conditions for your complex server and software system architecture. With this in mind, Rittal combines the five key elementary infrastructure components to create an extremely variable, and above all secure system:
Rack, Power, Cooling, Security, Monitoring & Remote Management.
With Rittal, a high level of IT availability is guaranteed. |
|
Elma offers AC and DC horizontal enclosures in 2U and 5U heights and a DC-only version in 4U height. They include a wide range of backplane, shelf management,and other options. Pluggable and redundant fan trays, PEMs and shelf managers provide the highest level of availability (99.999%). The units have been optimized via backplane signal integrity studies and chassis thermal simulation.
The 2nd Gen 19" rackmount vertical ATCA chassis is designed for carrier-grade applications. The 13U chassis features a 14 -slot Dual Star or Mesh backplane. The unit is fully pluggable, designed for NEBS compliance, and radial or bussed IPMB shelf management. The chassis has been optimized via thermal simulation studies.
|
|
AdvancedTCA Integrated Platforms
Kontron offers comprehensive pre-integration and pre-validation services for its AdvancedTCA open modular platforms. Available in different form factors, the line of Kontron OM platforms are reliable, scaleable and always the best configuration from the very start.
Please visit Kontron AdvancedTCA boards and review the Kontron portfolio of GbE and 10GbE AdvancedTCA platform elements including multi-core processor boards, switches and AdvancedMC carrier boards.
Please visit the Kontron AdvancedMC modules section for a complementary line of processor, I/O and storage AdvancedMC modules. |
|
|
|
