|
|
|
Two frames with different stability but identical outer appearance. Two colour combinations for immediate selection on ServicePLUS. Large variety of versions and dimensions (up to 1200 mm depth). Unique profile with many assembly possibilities and new ways for cable management.
|
|
Due to the hardness of the material, we recommend using metal multi-tooth screw
SZ 2486.300 for the interior installation.
Rittal Service:
TS stainless steel (1.4301) available in protection category NEMA 4x on request – please add extension .640 to the Model No.
Material / Surface finish
Material:
Stainless steel 1.4301:
Enclosure frame, roof, rear panel and gland plates: 1.5 mm
Door(s): 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure frame and gland plates: Bare
Door, roof and rear panel: Brushed on the outside,
grain size 240
Mounting plate: Zinc-plated
Supply includes
Enclosure frame with door(s), mounting plate, gland plates, rear panel and roof, 2 support strips fitted in the enclosure depth (only with depth 600 mm).
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
Absolutely new , workable for small and medium offices where you cannot place a standard Server Rack 19" Cabinet due to space.
Dim. 600Lx1000Px650 12 Units
Code : MAGN1062 Colour Black Ral 9005
With this new solution you can solve all space problems in office , can contain also Servers with 800 depth.
This cabinet can be placed or under desk or in a corner of the office without be in the way , with a very nice styling .
Contact us for more information
We are also looking for Distributors and Agent for free areas, if you are interested contact us
|
|
With a depth of 1000 mm, these cabinets are suitable also for housing very large servers.
The side panels come with ventilation flutes.
Available for both width 640 and 800 mm.
It is advisable to make use of a front and/or rear door with holes, to ensure adequate heat dispersion.
NEW!
It’s now available the special dimention 600 x 850 - 42 units, specially made for servers and to be positionned on floating floors!
WE ARE LOOKING FOR DISTRIBUTORS AND AGENT IN FREE AREAS, IF YOU ARE INTERESTED CONTACT US
|
|
With UNIQLE, SCHÄFER is systematically implementing the principle of a cooling system integrated in the server rack. The decision for integration is a logical step.
Server space is not unlimited! And through the trend to higher and higher computer performance accompanied by a greater packaging density, server racks must assure a maximum of space efficiency. This enables
a maximum computer density per m2 floor space to be achieved.
|
|
- dismountable aluminium cabinet frame
- passively ventilated viewing doors (side
perforations) with turning lever lock
- rear door with fitted perforated panel
(48% perforation) with turning lever lock
- two asymmetrically split side walls with
sash fastener locking mechanism
- two 19" levels depth adjustable assembly
options for the integrated
19" parts (see top view cabinet frame
page 2.3 "Technical information")
- 3-part bottom plate- closed
- closed top plate
- base with tilt prevention D=1150 mm
- earthing set 2.5 mm2, mounted
- 19" screw set M5, 50 pcs
Delivery:
fully assembled, base included
(with H=2000 mm)
|
|
- The most up-to-date cabinet solutions for all standard server and network components even for combinations of components from
different manufacturers
- Maximum assembly range: 900 mm deep, 600 mm wide
- Maximum security: side panels attachable/detachable with lock,
doors with pivoted handle and lock
- Optimum ventilation (active or passive)
- Simple to assemble and disassemble − all cabinets can be dismantled
- Mobile or stationary application possible
- In light grey RAL 7035 or black RAL 9005, inc. accessories in black
- Extremely strong frame with load bearing capacity of up to 1000 kg
|
|
SP54 Rack
- High-grade steel cabinet (light grey RAL 7035, black RAL 9005). Profi le technology guarantees maximum stability
- Fully assembled with basic accessories
- Flexible interior − designed to accommodate all currently available IT components
- Simple to assemble and disassemble − all cabinets can be dismantled
- Accessible from all sides (removable doors and panels)
- Can be used as stationary or mobile units
- 100% modular system, can be extended at any time
- Extremely strong frame with load bearing capacity of up to 1000 kg
- Protection rating: IP54, all-round sealing
|
|
|
|
|
|
Application
Designed deeper to house servers and manage power cables, PROLINE® FLOTEK™ Cabinets rely on optimized passive airflow for thermal management. The cabinets may be placed in data rooms randomly or in hot/cold aisle configurations.
Features
• Rigid front door made of aluminum extrusions and formed perforated steel offers highly attractive appearance and durability
• Fully perforated front and rear doors and fully perforated top allow maximum air movement around equipment; conforms to server manufacturer open space requirements
• Models without sides fit together quickly for easy installation in ganged applications
• Three-point locking pushbutton swing handle on front door provides easy but controlled access; two keys included
• Rear doors are split for easy access and include 3-point, low-profile, locking swing handle
• Two sets of 19-in. square-hole rack angles support both front and rear of equipment
• Rack angles are infinitely adjustable from front to rear for positioning flexibility
• Large gland plate in top allows easy routing of cable, pre-terminated cables and patch panels
• Mounting hardware (20 each of 10-32 screws and cage nuts) is included
Specifications
• 16 or 14 gauge steel doors, sides and cover
• Welded 12 gauge steel frame
• Rack angles have square holes with EIA 310-D spacing
• Open bottom with integral bolt-down brackets
Finish
Phosphatized steel coated with RAL 9005 black textured, low-gloss polyester powder paint. Other finishes available—contact Hoffman Customer Service.
Patents
|
|
Project and Effi ciency Range with low-cost
Complete Cabinets for networks
- Models for maximum market coverage with
43 U in heights of 2000, depths of 800 and
widths of 800 mm
- Extremely strong framework with a load
bearing capacity of up to 700 kg
- Frame can be "halved"
- High quality powder coating fi nish in light
grey RAL 7035 on all panelling components
- All panelling, such as side panels and doors,
can be removed in seconds
- Top and bottom modules prepared for brush
strips and/or ventilators
- Doors fi tted with T-handles and locks. Can be
exchanged for pivoted handles
- Plinths are always passively ventilated,
100 mm high
- Standard depth-adjustable 19" mounting
angles
- Extremely high savings on each baying solution
Material:
- Framework, vertical: 1mm steel sheet, multiply
profi led;
- Horizontal: 2 mm rectangular tube.
- Panelling: 1 mm steel sheet
|
|
. Management of the cables
. Modularity and Flexibility
. Capacity of resistance to the load up to 1.350 kg
. Invisible circulation of the cables
. 10 years guarantee
|
|
| ... products without technical information |
| |
|
Intel-based computers that deliver full PC functionality to the user from a centralized location. The blades are compact and house the latest PC components including Intel® Core™ 2 Duo, Xeon® and Pentium® 4 processors with Hyper-Threading, DDR2 memory, SATA hard drives and NVIDIA® graphics cards.
|
|
|
|
|
|
IPnexus® CPC5900 High-Performance IP Storage Blade
The CPC5900 is designed for embedded storage applications. NAS applications such as file serving, data caching and shared storage can be provided by NFS or SAMBA services. Database applications are supported via iSCSI for block-level storage access. With its onboard PowerPC processor, the CPC5900 can also be used as an application server where disk intensive services are required, allowing payload blades in the platform to operate without a locally attached hard drive, increasing system reliability and capabilities.
The CPC5900 is a high-performance, high availability NAS or SAN storage blade solution for CompactPCI®, PICMG® 2.16 systems supporting 800GB of storage. Each storage blade features two 3.5" enterprise-class SATA hard drives with board-level hot-swap and drive-level hot-swap for complete flexibility, high reliability and high storage capacity. The onboard high-performance PowerPC® processor operates on Performance Technologies' NexusWare® CGL 3.2 registered/ POSIX compliant Linux development environment. Block Disk I/O is supported over iSCSI for SAN applications and FIle I/O is supported using NFS and SAMBA for NAS applications. Network connectivity is provided by dual Gigabit network ports connected to the PICMG 2.16 Ethernet port on the backplane.
Highlights
High-Density 6U x 2-Slot CompactPCI® Form Factor
800GB capacity
Supports RAID 0/1/0+1/4/5/6
Board-Level & Disk-Level Hot-Swap
Headless Operation for Drive Removal and Insertion
Block Disk I/O over iSCSI
File I/O over NFS and SAMBA
PICMG® 2.16 Compatible
Dual 10/100/1000 Ethernet Ports Routed to the Mid-Plane
AMCC® High Performance PowerPC® Processor
Dual Enterprise-Class 3.5" SATA Hard Disk Drives
Additional drives may be added to rear panel board
PICMG 2.9 compatible with onboard IPMC
|
|
| ... products without technical information |
| |
outdoor racks and enclosures
applications
- Mobile telephony: energy racks.
- LAN, WAN networks.
- Metering stations.
- Electronics.
range
- Metal or polyester «indoor» racks and enclosures.
- Metal (simple or double skin) or polyester «outdoor» racks and enclosures.
- EMC protection.
- Anti-vandalism protection.
- Anti-seismic protection.
- IP 42, IP 55.
- Cooling by convection or by cooling unit.
- Adapted to accept 19" components.
- Individual product configuration.
|
|
The Powerware 5115 UPS offers excellent backup power protection and power quality management for PCs, small-office-home-office (SOHO) equipment, NT workstations, and small internet-working devices.
Delivering basic surge protection and backup power, the Powerware 5115 additionally offers the best UPS power protection against five of the nine common power quality problems.
|
|
As the power quality industry's most reliable and comprehensive option in backup power protection and power management, the Powerware 9315 UPS is essential for mission-critical applications such as data centers, server farms, and transportation facilities.
In your pursuit of maximum power quality and availability, the Powerware 9315 UPS power supply is the answer, and can be paralleled for both redundancy and capacity using patented Powerware Hot Sync%u2122 UPS technology. In addition to offering surge protection and backup power, the Powerware 9315 UPS power system delivers full uninterruptible power protection against all nine common problems.
|
|
... see all the products in the category
UPSs
|
| ... products without technical information |
| |
|
|
|
|
S7/S5-OPC-Server from Softing offers:
Quick and convenient access to the Simatic S7-200 /-300 /-400 and S5 series, as well as Siemens WinAC, Pilz PSS and Vipa controllers
Parallel communication with up to 256 PLC connections at once Supports all OPC client-enabled software incl. Citect, GE Cimplicity, GE Fanuc iFix, Iconics Genesis, Rockwell RSView, Siemens WinCC, Wonderware InTouch
STEP7-compliant variable addressing
Best in class" performance through dynamic optimization of throughput
Connection via PROFIBUS, Ethernet and serial interfaces in a server
Configuration through the import of symbolic data from STEP7 and Excel
Web-based diagnosis and mini-visualization through integrated Web server
Supports device and line redundancy
Supports PC cards and CPs from various manufacturers
Security through continual connection monitoring
Secure, high-performance remote access without DCOM through the integrated server-side OPC tunnel
Complete OPC Client and OPC ActiveX controls with Excel, HTML and Visual Basic examples included in package
|
|
|
|
|
|
Ease of use, extremely high performance and flexible application as Modbus client and server – these are the characteristics of the new Modbus/TCP OPC Server from Softing. A special advantage of the new Softing product is the possibility of using the Modbus/TCP OPC Server as a Modbus device.
The OPC Server thus additionally offers access to data in a Modbus supervisory control system or in a controller, e.g. a Schneider PLC. The convenient user interface makes the OPC data very easy to configure. An import function of the Modbus/TCP OPC Server saves significant costs and time in setup and commissioning: the entire configuration can be made in Excel. The support of aliases for the OPC data points ensures easy project planning. The communication connections to the Modbus devices are monitored and automatically reestablished if the connection is interrupted. Data throughput is optimized by an intelligent grouping of read and write requests. The Modbus/TCP-OPC-Server also includes an integrated Web server with comprehensive diagnostic possibilities. With a standard web browser, traces can be enabled during commissioning and selected process data can be displayed at runtime. Besides the Data Access Specifications 1.0a, 2.05 and 3.0 the Softing OPC Server also supports OPC XML-DA.
|
|
|
|
|
|
JetI/O 6510 is a Block I/O module equipped with one Ethernet port and 8 channels Analog Input connectors. JetI/O 6510 provides 16 bit resolution and high accuracy for I/O data collecting. The analog input range can support from 150mV to 10V and 20mA. The values are most adopted in the industrial environment.
The JetI/O 6510 supports advanced peer-to-peer I/O function. The logic result of IO channels from one device can be sent to more than one peer JetIO devices without additional intermediate controller and thus modify their channel status.
With the peer-to-peer I/O function JetI/O 6510 can configure with up to 8 Unicast IP addresses of the peers reducing network traffic, saving all devices’ computing power, as well as making peer-to-peer activity across a LAN segment easily.
JetI/O 6510 provides Windows Utilities, SNMP and Web for configuration. Industrial Modbus/TCP protocol and OPC Server driver for integrating JetI/O with existed HMI/SCADA. Robust aluminum case is with good heat dispersing and IP31 protection. With JetI/O users can easily perform status monitoring and control the remote I/O devices.
Major features include:
* Ethernet Block I/O with 8 Channel Analog Input from 150mV to 10V, 20mA
* 16 bits resolution and high accuracy
* High/Low Voltage/Current active alarm
* Flexible peer-to-peer I/O through one-to-one, one-to-many, many-to-one, and many-to-many communication
* Unicast for network efficiency and true remote I/O
* Free OPC server and support Modbus/TCP
* Built-in watchdog timer and real-time clock
* SNMP / Web for easy configuration and management
* Operating temperature -25~70℃
* IP31 case protection
|
|
Dimensional Domain Server is a CogniTens software product that runs on a central server and is designed to fit a customer’s proprietary business processes and methodologies.
The Dimensional Domain Server interfaces with various CogniTens platforms and software products and provides a secure and managed environment to collect, store and manage dimensional information generated across the organization.
The Dimensional Domain Server answers customer needs to manage dimensional Information throughout the vehicle program lifecycle, efficiently communicates between dimensional business process members in real time and propagates critical shop-floor dimensional information used for decision making, monitoring and ongoing improvement to engineers and managers.
|
|
|
|
