|
|
PKM-400 e PKM-500
PKM series cabinets are made up of a main unit and tempered glass door.
Two product families belong to the PKM system, with different cabinet depths: PKM-400 and PKM-500.
The removable side walls allow the access to the rear cabling while at the same time guaranteeing securety since they can be removed only after the front door has been unlocked.
PKM-400
DEPTH 413 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0749 - h 360 mm - 6U
MAGN0750 - h 493 mm - 9U
MAGN0751 - h 626 mm - 12U
MAGN0752 - h 760 mm - 15U
MAGN0972 - h 1027mm - 21U
PKM-500
DEPTH 513 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0753 - h 360 mm - 6U
MAGN0754 - h 493 mm - 9U
MAGN0755 - h 626 mm - 12U
MAGN0756 - h 760 mm - 15U
MAGN0973 - h 1027 mm - 21U
|
|
Permanent availability of your IT systems is undoubtedly crucial.
This is your company's heartbeat. For this reason, it is important to ensure stable conditions for your complex server and software system architecture. With this in mind, Rittal combines the five key elementary infrastructure components to create an extremely variable, and above all secure system:
Rack, Power, Cooling, Security, Monitoring & Remote Management.
With Rittal, a high level of IT availability is guaranteed.
|
|
|
RapidNet is a patented, high performance, pre-terminated system that utilizes a proprietary bundled cable cut to customer specified lengths. Combined with our patented cassettes, which protect the terminations, installation is a snap - literally. The cassettes snap easily into the RapidNet modular panel which fits into a standard 19" rack. RapidNet, manufactured in a stringent, quality controlled environment, arrives pre-labeled and pre-tested which contributes to higher quality and lower installation times. Because it can be installed so quickly and carries a high degree of performance and reliability, RapidNet is the ideal solution for mission critical data centers, temporary networks, and disaster recovery planning.
|
|
- high-quality design
- aluminium circular extrusions
- colour specified by customer
- Symmetrical
- all pieces can be mounted on all sides (4 doors possible)
- all parts mounted on the aluminium extrusions can be installed
on the front and sides
- Installation advantages
- side panels can be plugged into place and locked with a
sash fastener
- sliding roof and floor pieces for cable entry with integrated
tension relief
- 19" mount, adjustable mounting depth (right and left)
- can be dismantled
- high stability
- 19" and metric system solutions
|
|
A complete offer of chassis will cover all needs:
Industrial Rack Mount Chassis 4, 8, 14 or 20 slots with different combinations ISA/PCI.
Industrial Rack Mount Chassis with different height: 1U, 2U, 4U, 5U, 6U or 8U. Available with LCD screen
POwer supply 150W in 500W AT / ATX / AT-
Function PFC - verbose power supply- Power supply " hot-swappable ",... Chassis with tolerance of breakdown,control of machines, control of temperature, indicators of states in front panel, management of aeration,...
|
|
|
|
|
|
NT Box 3-part Wall Cabinets - For optimal accessibility from 4 sides
High-grade steel housing (light grey RAL 7035) complete with basic
equipment.
-Hinged centre section, 500 mm, with a twoway ock
-Optimum accessibility for fast installation: once the door is open, the side
panels can be drawn forward
-Mounted ready for installation, glass door at front, inc. lock, central swivel
mounting frame,19 mounting angles at front, cable entry apertures in top
and bottom .
-Transportable packaging for single units
-Overall depth of 650 mm, from 6 - 18 adjustable
shelf height units.
The wall-mounted 3-part NT Box was specially
developed for small networks, sub-distributors
and fl oor distributors.
The major practical problem of accessibility is
solved by the fact that the door can be very
quickly removed once opened, allowing the side
panels of the centre section to be slid out forwards.
In addition, the entire centre of the box can
be swung out to one side.
This way, the housing is easily accessible from
all four sides and allows all components to be
installed easily.
To change the doors from left to right-hand
opening, simply lift out the hinge pin and replace
them in the fi xings provided.
|
|
|
HellermannTyton’s rack mount fiber enclosures are the ideal direct termination and splice solution of LAN applications capable of supporting up to 192 fibers. While offering easy-to-use front slide-out trays for easy access to connections, enclosures are equipped with cable management and cable routing accessories to limit bend radius and add strain relief control. HellermannTyton’s Rack Mount Fiber Enclosures easily fit into 19” or 23” racks.
|
|
- 4U 19'' Rackmount Industrial Chassis for IPC or Mainboard :
- Rugged design constructed in 1.2mm Heavy duty steel and
it's a cost effective solution
- One 12cm lntake cooling for excellent cooling cycle and
comes with washable air filter
- Design for various industrial computer for networking,
communication applications and related solutions
|
|
Driver Bays 2 x 5.25ff Bay, 2 x 3.5ff Bay
System Control Power Switch button, Reset button, Keyboard-Lock button
System Cooling Fan 1 x cooling fan(optional)
Power Supply Support ATX/PS/2 Power supply
Vibration 0.5g rms/5`500Hz/random operation
EMC CE/FCC Class B
Construction 1.2mm galvanized Heavy duty steel
Operating Temperature 0`50
Operation Humidity 5%`95%, 40, no condensing
Dimensions 482mm ~ 450mm ~ 177mm (W~D~H)
|
|
| ... products without technical information |
| |
Swedish-manufactured Eye and/or Facewash
Wall mounted (available as free standing)
Each spray head has an internal flow control and filter to remove impurities. Self draining ball valve, with non-returning spring, operated by a push plate. Delivered with collecting bowl in stainless steel.
The water supply should be designed for a minimal flow of 14 litres per minute at a pressure of 2,4 bar.
An emergency sign is enclosed with each eye wash.
|
|
|
Wall mounted eyebath suitable for any environment. Operated by lifting lid, this unit comes complete with intergral stainless frame, 2 diffuser nozzles, flow control and micron filter.
|
|
|
Built to last, with minimal maintenance, Haws drench showers cover the gamut of installation styles and capabilities.
|
|
Krusman emergency shower, wall mounted
Shower head in stainless steel. Ball valve, with non-returning spring is operated by a pull handle or pull rod for disabled person.
The water supply should be designed for a minimal flow of 90 litres per minute at a pressure of 2,4 bar. Please note, the wall bracket is to be ordered separately.
An emergency signs is enclosed with each emergency shower.
|
|
Heavy duty wall mounted shower. Ideal for any environments, this unit will not overheat or freeze. Comes with rigid safety sign and wall bracket.
1" BSP stainless inlet
|
|
Self-draining eye and face wash, wall mounted, with automatic pressure and flow control.
Designed to meet the European DIN standards DIN 12899-1 & 2 for Emergency Eyewash and Shower Equipment.
Certified by INSPECTA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
|
|
Horizontal drench shower with a stay open chrome plated brass ball valve.
Designed to meet the European DIN standards DIN 12899-1 & 2 for Emergency Eyewash and Shower Equipment.
Certified by INSPECTA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
|
|
WALL MOUNTED EYE-WASHERS
LV10 STAINLESS STEEL BOWL
Hand operating. Wall mounted. Green epoxy paint stainless steel bowl (RAL 6032). Grey epoxy paint galvanized steel piping (RAL 7040). Supply : M 1/2". Draining : F 1"1/4. "Emergency eye-washer" normalized label delivered. Flow : 17 l/mn. Weight : 4,3 kg.
|
|
WALL MOUNTED SAFETY SHOWERS
SHOWER - ABS SHOWER HEAD
Hand operating. Wall mounted. Green ABS shower-head (RAL 6032). Grey epoxy paint galvanized steel piping (RAL 7040). Supply : M 1". "Emergency shower" normalized label delivered. Flow : 120 l/mn for the shower. Weight : 4,3 kg.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
