|
|
The AdvancedTCA® Power connector offered by HARTING is designed according to the PICMG 3.0 R2.0 specification and is used in the „Zone1“ section of the AdvancedTCA® backplane and daughter card.
The connector offers 8 power contacts with the current carrying capacity of up to 16 A each and 22 signal contacts in the standard configuration.
|
|
The terminals for printed circuit boards offer the possibility of establishing mechanical and electrical connections between wires and printed circuit boards. Our range only comprises screw terminals to secure an optimal electrical contact. They may be placed side by side and labelled.
In addition to one-step versions our range includes also two- and three-step terminals with compact design but important connecting capacity. The terminals are available with various cross sections and pin spacing. Our programm also comprises pluggable PCB terminal strips (with plugs and sockets) which enable electronic modules to be disconnected and easily replaced.
|
|
|
|
|
|
HARTING’s comprehensive D-Sub connector range provides solutions for various applications, including:
* D-Sub - Standard connectors with 9 to 50 straight, right-angled, right-angled low profile or US foot print style contacts.
* D-Sub - High Density connectors with 15 to 78 straight and right-angled contacts, exceeding the contact capacity of the standard Subminiature D connectors by 70%.
* D-Sub - Mixed connectors with nearly 20 different contact arrangements offering versatile options for mixing power, coaxial, high voltage, signal and even pneumatic contacts in one connector.
* D-Sub - Waterproof - IP 67 connectors with 9 to 50 contacts for panel mount to PCB or cable.
* D-Sub - Filter connectors.
Depending on the product family, various termination techniques can be supplied for D-Sub connectors such as press-in, solder, SMC or SMT to match the customer’s termination process.
In addition, a wide range of hoods and accessories completes the D-Sub cable connector range to fulfil all kinds of requirements such as EMC, IP 67 etc.
|
|
|
|
|
|
ODU MINI-FLAKAFIX:
- Card-to-Cable Connector
- Grid 1.27 x 2.54 mm
- Positions: 10/20/30/40/50
- Pin strip for SMT and solder wave
- Excellent Impedance values
- Outstanding contact properties:
(Contact resistance < 6 mOhm, mating force 0,18 N/Contact)
- Locking with plastic lever or metal clip
ODU FLAKAFIX:
- Card-to-Cable Connector
- Grid 2.54 x 2.54 mm
- 10-64 Positions
- Termination technologies:
Solder-In, SMT, Press-In, Pressure, Pin-in-Paste
- Headers straight and right-angle
- Low Profile version available
ODU MINI-CARD:
- Board-to-board connector
- Grid spacing 1.27 mm
- Pin and socket strips for solder-in and SMT connection
- 6 to 50 contact positions
- For PCB distances from 7 mm - 17 mm
- Stringable
- RoHs compliant
ODU CARD:
- Board-to-board connector
- Grid spacing 2.54 mm
- Pin and socket strips, straight and right-angle
- Pin and socket strips for solder-in connection
- 1 to 60 contact positions
- Standard and customized pin lengths
- 2 and 4 point contacts
- RoHs compliant
|
|
|
|
|
|
ODU ROB:
- Connector for industrial robot systems and units
- Simple installation because the contacts lock in place
- IP 67 when inserted
- Flammability class UL 94-V0
- Cable housing can be rotated in any direction
- Pilot contacts are possible
- Very good electric characteristics (operating voltage up to 800VAC)
- Cable housing can be rotated in any direction- straight or
right-angled cable outlets
- Simple packaging of the cable housing
- Cost savings with system solution (connector & cable)
ODU DOCK:
- Connectors for robots, docking systems and tool changing systems
- 4 sizes
- Connector diameters from 28 to 75 mm
- Interchangeable contacts
- Contacts fastened with metal clip (barbed hook)
- ODU springwire contacts for high contact stability
- Version with quick-change head available for extremely
high number of mating cycles
Heavy Duty Connectors:
- Up to 1,500 A
- Up to 252 contact positions
- More than 100 different pole images
- Threaded and bayonet locking
- ODU springwire contacts for high contact stability
- Suitable for the most hostile environmental conditions
- Very long life span
- High packing density
- Mechanically robust
|
|
|
|
|
|
Connectors for signal transmission – uninterrupted connections even under adverse ambient conditions: DN Metal and DN Plastics connectors from Schaltbau.
With the DN Series the proven spring-loaded contact technology from military communication will set new standards for signal transmission when it comes to industrial applications. Our water tight connectors ensure uninterrupted connection in harsh environments. The DN Series connectors feature bayonet interlock. The spring-loaded contacts with self-cleaning faces, patented by Schaltbau, guarantee a long design life and high resistance to shock and vibration. The constant low contact resistance provides for high contact reliability even with low voltages and currents within a wide temperature range.
The modular design of the DN Metal Series allows for additional shielding of the connector against electromagnetic influences.
Schaltbau DN Series connectors: The cost-effective and technologically attractive alternative to commercially available push-pull connectors!
|
|
|
|
|
|
Series 243 Card Edge Connector
* .200" (5.08mm) Contact Spacing x .200" (5.08mm)
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 301 Card Edge Connector
* EISA or ISA (IBM XT/AT) Daughter Boards
* .050" (1.27mm) Contact Spacing 4 Rows 2.54mm Spacing
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 302 Card Edge Connector
* Accommodates MCA Daughter Boards
* .050" (1.27mm) Contact Spacing 4 Rows 2.54mm Spacing
* Accepts .062" (1.57mm) Nominal Thickness PC Boards
Series 303 Card Edge Connector
* UL Recognized .156" (3.96mm)
* Contact Spacing x .140" (3.56mm)
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 305/315/355 Card Edge Connector
* 305/355 Series CSA Approved and UL Recognized
* 315 Series UL Recognized
* .156" (3.96mm) Contact Spacing x .140" (3.56mm)
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 333 Card Edge Connector
* .156" (3.96mm) Contact Spacing x .200" (5.08mm)
* Accepts .062" (1.57mm) Nominal Thickness PC Board
Series 345/395 Card Edge Connector
* CSA Approved and UL Recognized
* .100" (2.54mm) Contact Spacing x 5.08mm
* Accepts .062" (1.57mm) Nominal Thickness PC Board
|
|
|
The DIN 41612/IEC 60603-2 connector line from ERNI includes standard connectors and customer-specific connector technology solutions. The standard and inverted connectors for printed circuits correspond to national and international standards. All connectors have the same installation requirements, regardless of differing application characteristics. This connector line includes modules with a high contact density for low voltages; and modules with a low contact density for high voltages. In addition to the standard types, ERNI offers a wide variety of versions and connection technologies that provide users with economical solutions.
|
|
2.54mm Board to Cable Connectors (Latch Headers) Series LPV acc. to IEC 60603-13
Female connectors
IDC
Interlocking latches
Male connectors, with interlocking
Solder
Pressfit
THR (black)
Male connectors, without interlocking (low profile)
Solder
Pressfit
Strain relief clamp
|
|
|
|
|
|
The EasyConn PB of Vipa is offering an accessory for practical use with well thought-out performance characteristics. For the first time a micro-controller has been integrated into a Profibus connector which can provide information on power supply, bus function, termination and possible bus failures via four LEDs. With the integrated PG/diagnosis jack the plug is especially suitable for application in extensive plants.
The bus cables can be easily connected with the insulation piercing technique: open the cover, insert the unisolated cable, close and fix it with the captive screw. Additional security for the connection of incoming and continuative bus lines is given by the transparent cover and its possibility of visual inspection.
Connection with a highly-flexible bus cable from Lapp according to Type A (EN 50 170) will also be possible with immediate effect.
The termination can be activated and deactivated with a comfortable slide switch which also enables the disconnection of the continuative bus line. Thereby tests can be conducted without having to remove or connect cable and plug. The EasyConn PB offers cable outlets in 90°, 45° or 0°. The 90° variant is also available without diagnostic function.
|
|
|
VIPA offers a wide range of accessories like programming, download or Profibus-DP cables, memory modules and Profibus-DP plugs with diagnosis.
|
|
Woodhead Introduces the most significant innovation in industrial connectors in 30 years!
NEW! Ultra-Lock Connector System
Next Generation M12 Connector Technology
Fast - Simple - Secure
|
|
The majority of components connected to a backplane are connected using solderless pressfit technology. Two-row power taps featuring either an elastic pressfit zone or soldering termination were developed by ERNI for connecting power supply lines. Cable plugs or terminal sockets can be optionally used for cable termination.
The power taps can either be connected via screw or plug-type terminals with cable lugs or flat terminal sockets. For versions featuring 6 pins, the max. current is 30A at 20°C ambient temperature. Versions featuring 10 pins can withstand 40A at 20°C.
|
|
Series 621 / 622 D-Subs with Filtering
* Attenuation - 20dB min@30mhz, 30dB min@50mHz
Series 621 / 622 D-Subminiature Connector
* 0.109%u201D (2.77mm) contact spacing x 0.112%u201D (2.82mm) row spacing
Series 625 / 626 D-Subs with Deep Body
627 / 628 D-Subs Low Profile Housing
Series 627 / 628 D-Subs Standard Body
Series 627 / 628 D-Subs Extended Body with Filter
* Attenuation - 20dB MIN @ 30Mhz, 30dB MIN @ 50Mhz
634 Series Slim VGA Connector
* High Density Three Contact Rows .079%u201D (2.00) footprint
* 090 (2.29) Contact Spacing x .112 (2.82) Row Spacing
|
|
The majority of components connected to a backplane are connected using solderless pressfit technology. Two-row power taps featuring either an elastic pressfit zone or soldering termination were developed by ERNI for connecting power supply lines. Cable plugs or terminal sockets can be optionally used for cable termination.
The power taps can either be connected via screw or plug-type terminals with cable lugs or flat terminal sockets. For versions featuring 6 pins, the max. current is 30A at 20°C ambient temperature. Versions featuring 10 pins can withstand 40A at 20°C.
|
|
With Spectrum Advanced Specialty Products’ line of D-subminiature connectors, you’ll be sure to find an EMI filtered connector for every need. With low ground impedance and ground plane shielding, our D-sub connectors are ideal for EMI shielding. Low profile, hi-density and high performance connector options are also available, each with a convenient compact design for better manageability. These D-subs provide high insertion loss with tubular capacitive filtering, and with 100% testing of filters we provide more consistent performance at a lower cost.
• Male-Female adapters available for EMC testing
• RoHS compliancy available
• Drop-in replacements for unfiltered connectors
• Ferrite, Feed-thru and Pi filters
• Compact design with fewer components
• Re-radiation elimination
• Wide array of shell sizes, configurations and terminations
|
|
|
|
|
|
ERmet ZD connectors were specially developed for differential high-speed signal transmission in telecom applications with data rates of up to 10Gbits/sec.
This robust, high quality modular connector system is just as well-suited for use in conjunction with the 2mm HM (IED 61076-4-101) ERmet line of connectors.
The inline design of the signal and ground contacts makes simple, economic routing (conductor track routing) possible. Signal and ground contacts have different connection levels with a gap of 1.5mm, thus ensuring a safe connection. In addition, the contacts are assembled into a robust housing.
The ERmet ZD connector utilizes an optimal grid construction that reduces signal interference and offers ample room for conductor track routing. Its optimized design and effective shielding allow the ERmet ZD system to exhibit superb performance when it comes to crosstalk and reflections.
The ERmet ZD connector has been selected as the backplane interconnect for the PICMG 3.x (ATCA) industry standard.
|
|
|
|
|
|
ERmet ZD connectors were specially developed for differential high-speed signal transmission in telecom applications with data rates of up to 10Gbits/sec.
This robust, high quality modular connector system is just as well-suited for use in conjunction with the 2mm HM (IED 61076-4-101) ERmet line of connectors.
The inline design of the signal and ground contacts makes simple, economic routing (conductor track routing) possible. Signal and ground contacts have different connection levels with a gap of 1.5mm, thus ensuring a safe connection. In addition, the contacts are assembled into a robust housing.
The ERmet ZD connector utilizes an optimal grid construction that reduces signal interference and offers ample room for conductor track routing. Its optimized design and effective shielding allow the ERmet ZD system to exhibit superb performance when it comes to crosstalk and reflections.
The ERmet ZD connector has been selected as the backplane interconnect for the PICMG 3.x (ATCA) industry standard.
|
|
The high-speed SMT connector Microspeed with the pitch 1.0mm is especially designed for modern board-to-board applications in telecom and datacom equipments with data rates up to 10 GBit/s. MicroSpeed features differential signal transmission with a impedance of 100 Ohm or single ended signal transmission with a impedance of 50 Ohm. Two different signal contact arrangements are possible. For improved crosstalk parallel signal ports are recommended. A excellent signal integrity is achieved by a design with 2 signal and 2 shield contact rows. The termination area of the shield contacts is available in 2 options: SMT or THR (Thru Hole Reflow).
For fully automatic SMT assembly the connector features:
- Tape and reel packaging
- Black high-temperature insulator for fast and reliable visual recognition.
- Integral pick and place surface for easy grip with a vacuum pipette
|
|
|
|
|
|
Micro-D connectors
AXON’ develop custom designed solutions, based on Micro-D twist-pin contact technology for critical conditions:
- Connectors to MIL-DTL-83513
- pigtails, microstrip, connector savers
- Custom designed number of ways (i.e : 18, 33, 120)
- Specific shells or hardware (narrow shell) : shape and materials
- Specific plating material (500 h salt spray, stainless steel)
- Non removable hardware
- Specific layout for PCB versions (0.075” footprint onto PCB)
- Panel mounting shells, with waterproof seals
- Combo D : connectors including signals, coaxial and power contacts
- EMC optimised solutions
- Circular Micro-D connector range (plastic and metal shells)
- Overmoulding solutions
- Extreme miniaturisation
- Specific backshell termination
Nano-D connectors :
- Number of ways : 9, 15, 25, 37 and 51 ways
- Twist pin contacts
- Metal shells
- Rectangular connectors
- Standard hardware
- Non removable hardware
- Pigtails
- PCB connectors (BS/CBR/SMV)
- Special Nano-D connectors on request
Advantages
- Space saving
- Integration with specific cable or harness configuration
- High EMC protection
- Special shape to facilitate mechanical integration
- Customised solutions
- Extreme miniaturisation
- Twist-pin male contact : high reliability of electrical connection in severe conditions of temperature and vibration, low contact resistance, 500 g's mechanical shock resistance.
Applications
- Avionics, gimbals, radars
- Missiles and guidance systems
- On-board equipment, telecommunication systems
- Navigation systems
- Space
- Research Centres
- Off shore
- Medical application (hearing aid system, MRI, etc…)
- Automotive
|
|
|
Modular plugs for flat and circular cables, chassis sockets for THT and SMT soldering. For signal and low load currents up to 2 A.
|
|
The newly developed GES RJ45 module for Heavy Connector Housings enables Ethernet connectivity with the proven durability of industrial connectors. The RJ45 module ensures simple wiring of Industrial Ethernet components with excellent protection against electromagnetic fields, moisture, dust and mechanical influences. The module was specifically designed to withstand the rigors of the harsh industrial environment. This module provides the rapid enhancement of Fast Ethernet connections to any equipment utilizing the Modular Connector power/control system, at <=100 MBit/s transmission rate.
Find more information on the datasheet and on www.ges-electronic.de
|
|
FEATURES
* Printed circuit board mounted Quick disconnect
* Tin/silver plated for solderability
* Fully insulated housing
* Multiple color-coding and keying options available
* Straight and right angle terminal
BENEFITS
* Avoids the need for unfastening ring type terminals
* Minimal contact resistance at high current
* Plastic housing provides safe connection for user.
* Enhances design flexibility
* Provides flexibility of parallel or perpendicular mounting to the PCB
|
|
This new concept of modular power connection allows a variety of applications, specifically adaptable to all users.
The wide range of current ratings available (40 to 1000 A) as well as the different levels of watertightness and shielding possibilities, offer connector solutions to numerous applications such as traction motors, converters, transformers, intercar power lines ...
|
|
G12 - 12 Module Solution
Easy Glide Docking
* Provides an easy way of guiding a fixture into position prior to engagement
* Runners along the platform provide a smooth-sliding action
* Ideal feature when using large scale fixtures
Tabletop Configuration
* The tabletop configuration allows the S6 and G12 to be mounted to any horizontal surface
* Rear covers are available to protect wiring from the receiver to the test equipment
QuadraTrack™ Engagement
* Engaging Mechanism in the form of a pair of slotted steel slides located in the Receiver
* Distributes uniform pressure to four points on the ITA during engagement and disengagement
* Precise signal integrity between the Receiver and ITA is maintained by QuadraTrack™ engagement system
Slide Configuration
* The Slide Kits for the S6 and G12 allow access to test instrumentation and wiring
* Multiple Accessories are available for this configuration such as the Cable Tray and the Keyboard Tray Kit
|
|
RIA Connect offers high quality, competitively priced RJ45 jacks and Ethernet connectors. Our product line includes shielded and unshielded RJ45 jacks, thru hole jacks with top or side entry and surface mount RJ45 jacks. We can meet the needs of your data transfer and communications equipment with Cat 5, Cat 5e and Cat 6 compliant jacks, in addition to single port or multi port jacks, LED jacks, USB jacks, Keystone jacks, Industrial Ethernet IP 67 connectors and magnetic jacks.
New this year is X|Synergy. X|Synergy is a product line which facilitates an IP-67 level connection system between the network cable and the PC board. X|Synergy is a robust, tool-less, self-aligning interface which reins supreme in harsh environments. X|Synergy achieves all this while meeting CAT 6A compliance standards, and easily supporting 10Gb/s transmission.
|
|
For sixty years, the HCC Industries family of companies has been providing the technological know-how to meet the unique requirements of the defense and aerospace industries, as well as those customers in other industries using circular connectors in their applications.
NEW from Ametek SCP, a range of Rugged Gigabit Ethernet Connectors. Designed for use in very harsh environments and available in D38999 and MIL-C-24231 shell configurations. Certified by ETL to TIA/EIA 568 CAT 5E and CAT 6. PATENT PENDING.
|
|
|
The SMT connector series MicroStac with 0.8 mm pitch and with SMT termination is based on a hermaphroditic design. As result of this the male and the female connector are identical. The same style for male and female connector meet the requirement for a economical connector solution in modern applications in electronics. The dual-sided PCB application contact principle provides for a tilt-proof and insertion-proof connector position on the PCB. The gripper surface is integrated within the insulator body. This obviates is the need for the standard assembly hood. Optionally, versions featuring positioning pegs are also available. Using the MicroStac a board-to-board height from 5.0 mm up to 6.5 mm is achieved.
|
|
|
For cable-to-board connections with flat cables, where space is at a premium. Plugs and solder-in connectors in insulation displacement technology, tab headers for THT and SMT soldering. For signal and low load currents up to 1.2 A, pitch 1.27 mm (.050").
|
|
ERNI pin connectors are one- and two-row plastic strips assembled with square 0.6 x 0.6mm pins. The connector side is completely gold-plated, and the terminal side is tin-plated. Unshrouded headers are available in different connection lengths and termination types. Right-angle versions are also available.
Single and dual row connectors can easily be broken off to the desired number of pins that is required, by using predetermined break points. Any number of pin connectors can be arranged next to each other in a row, as the housings have detents on their long sides. ERNI supplies many customer-specific solutions of this kind. It is also possible to have unshrouded headers with a pressfit zone on both sides - an inexpensive board-to-board connection.
|
|
|
|
