|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Laydown centre dischage version & lateral lifting eyes
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM
|
|
BOTTOM DISCHARGE SKIP WITH SIDE CHUTE
Lever operated with side chute
The most versatile skip with both centre and side discharge, to be used for a variety of site concrete pouring requirements. The side chute allows concrete to be poured into structures where access is a problem
With a fixed bale arm, the 116 GL skip makes the concrete pouring effortless and precised.
|
|
GEARED ROLLOVER SKIP
Laydown version
The SBC VOL skip is the right skip when flowing a concrete with a low SLUMP (up to 5 cms)
The SBC VOL Geared Rollover Skip is designed for pouring mass concrete onto shutters and also large slab areas.
The patented innovative design offers excellent accessibility where handrails and scaffolding may present a problem. Gate operation is by means of a geared hand wheel which enables precise and accurate placing.
Capacities of 1200 litres and above are fitted with heavy duty reinforced bale arms.
The SBC VOL skip sits in the horizontal position on the ground for ease the filling and reverts to the vertical when in use.
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Laydown centre dischage version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Upright centre dicharge version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TI system are the following:
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTREGRAL SYSTEM
|
|
1011 Concrete bucket
Conical shape with straight outlet. Rugged, heavy-duty design with handlever operation of patented discharge gate. Optional approved welded-on chain or lift beam.
Options:
with bar or
hook or
approved, welded-on chain
forklift brackets
hydraulic lever operation
|
|
1092 Concrete bucket
Rectangular form with straight, inclined outlet for casting formwork.
Rugged, heavy-duty model.
Outlet within frame.
Options:
with hooks
with bar
with welded-on chain
with handwheel
|
|
1033 Concrete bucket
with release cord
Square shape with rounded corners; lateral chute or hose connector. Extra-rugged heavy-duty design with pull wire for releasing patented discharge gate. Gate closes automatically after discharge.
Especially suitable for casting formwork.
Built in accordance with international safety regulations, such as CE.
Standard version with 1.5m rubber hose.
Options:
with bar or traverse
hook or lug
approved, welded-on chain
outlet hose Ø 150mm or Ø 200mm or Ø 300mm
forklift brackets
up to 1000 litres
horizontal version
|
|
washing platform for concrete skips
The BETONET Compact is a skip washing station with a water recycling system. The new equipment meets the jobsites requirement in general environmental aspects and more especifically on the High Environmental Quality jobsites. The station enables to put safely the SECATOL concrete skip on a unique place (whatever model is being used), and to retreive and treat the sludge from the washing process. The PH treated and recycled water can be used for further cleaning whilst the sludge can be disposed of without pollution risks. Whether a site or a pre cast plant, washing skips are essential to ensure efficient use and durability, therefore the more use, the more they will require cleaning, thereby increasing consumption of water. The recycling system if the BETONET offers a distinct advantage whilst caring for the environment.
this skip washing station is patented and complies will the european acutal legislation.
|
|
3030 Anti-pollution storage depot
Robust steel sheet construction for statutory storage of water-polluting materials; safe and simple transport with crane or forklift. With overflow basin and binding-agent starter set.
Options:
any special colour
your logo on the doors
|
|
2019 Washing platform for concrete buckets
Robst steel construction for cleaning diverse concrete buckets. The raised floor guarantees the ideal working height for washing. With access ladder, safety rail and non-slip grid.
Options:
any colour
with your logo
galvanised
|
|
MX-2000 Glovebox Atmospheric Chambers
Features:
- Wide choice of control capabilities
- Range of vacuum pumps
- Sturdy, rugged, modular design
- Optional programmable logic
- Optional single or dual-column gas purification units
|
|
Inert Atmosphere Heating
Atmospheric Glove Boxes
• Integrated systems for auto and manual operation
• For use with nickel, titanium, superalloys,
stainless steel and refractories
• Replacement for hydrogen belt furnaces
• Reduces a typical 25-minute, quartz lamp
heating cycle to just three minutes
• Ergonomics increase operator comfort & safety
|
|
|
An isolator can be manufactured in two different modes: in rigid or flexible material. We have designed an isolator with mixed material (plexiglas and transparent pvc) in order to allow both resistance and flexibility.
|
|
General description :
Construction is similar to Scienceware® H50025-0000. The rear panel and cover can be easily detached and replaced without tools. Velcro® closures are used to attach the rear cover which overlaps the opening by 51mm (2") on all four sides. The integrity of the box and its atmosphere are preserved by a gasket on all four sides of the unit. Dimensions: 91cm (36") wide x 51cm (20") deep x 66cm (26") high. Rear panel opening 50cm (19 1/2") wide x 34cm (13 1/2") high.
Transparent acrylic fabrication
- Features two side-entry ports
- Large, rear panel opening
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
The BackPack plugs into the rear of the Cage and connects the PC Blades to the User Ports and the network. BackPacks, in conjunction with ClearCube software, enable PC Blade sparing and IT administrative control.
|
|
Eta offers a number of RACK solutions to satisfy a majority of applications including:
19" swinging frames
19" fixed frames
19" rails
Double Hinge Boxes (CR)
- Swinging frames with solid rotation hinges are manufactured from sheet steel and offer outstanding strength and versatility. The rotation direction is reversible (left-right) and the opening angle varies according to cabinet width.
- Fixed frames are applied directly on the cabinet framework. Only for cabinet with 600 width.
- CR Box (Double Hinge)
CR Boxes have two sections. The central section is used for mounting 19" components whilst the rear section with mounting plate, can be used for assembling standard components. The front with silk-screened security glass offers excellent visibility and aesthetic. Door can be mounted left or right.
|
|
|
The range PAC is intended for difficult environments. This range can accept up to 8 cards (short or long) ISA, PCI, or PCIe. Products of this range have a systeme of blockage for every card and a filter with removable air for easy maintenance.Thanks to conectors, this PC could be defined according to your needs.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
