|
|
BOTTOM DISCHARGE SKIP WITH SIDE CHUTE
Lever operated with side chute
The most versatile skip with both centre and side discharge, to be used for a variety of site concrete pouring requirements. The side chute allows concrete to be poured into structures where access is a problem
With a fixed bale arm, the 116 GL skip makes the concrete pouring effortless and precised.
|
|
1011 Concrete bucket
Conical shape with straight outlet. Rugged, heavy-duty design with handlever operation of patented discharge gate. Optional approved welded-on chain or lift beam.
Options:
with bar or
hook or
approved, welded-on chain
forklift brackets
hydraulic lever operation
|
|
1092 Concrete bucket
Rectangular form with straight, inclined outlet for casting formwork.
Rugged, heavy-duty model.
Outlet within frame.
Options:
with hooks
with bar
with welded-on chain
with handwheel
|
|
GEARED ROLLOVER SKIP
Laydown version
The SBC VOL skip is the right skip when flowing a concrete with a low SLUMP (up to 5 cms)
The SBC VOL Geared Rollover Skip is designed for pouring mass concrete onto shutters and also large slab areas.
The patented innovative design offers excellent accessibility where handrails and scaffolding may present a problem. Gate operation is by means of a geared hand wheel which enables precise and accurate placing.
Capacities of 1200 litres and above are fitted with heavy duty reinforced bale arms.
The SBC VOL skip sits in the horizontal position on the ground for ease the filling and reverts to the vertical when in use.
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Laydown centre dischage version & lateral lifting eyes
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Upright centre dicharge version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TI system are the following:
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTREGRAL SYSTEM
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Laydown centre dischage version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM
|
|
1033 Concrete bucket
with release cord
Square shape with rounded corners; lateral chute or hose connector. Extra-rugged heavy-duty design with pull wire for releasing patented discharge gate. Gate closes automatically after discharge.
Especially suitable for casting formwork.
Built in accordance with international safety regulations, such as CE.
Standard version with 1.5m rubber hose.
Options:
with bar or traverse
hook or lug
approved, welded-on chain
outlet hose Ø 150mm or Ø 200mm or Ø 300mm
forklift brackets
up to 1000 litres
horizontal version
|
|
3030 Anti-pollution storage depot
Robust steel sheet construction for statutory storage of water-polluting materials; safe and simple transport with crane or forklift. With overflow basin and binding-agent starter set.
Options:
any special colour
your logo on the doors
|
|
2019 Washing platform for concrete buckets
Robst steel construction for cleaning diverse concrete buckets. The raised floor guarantees the ideal working height for washing. With access ladder, safety rail and non-slip grid.
Options:
any colour
with your logo
galvanised
|
|
washing platform for concrete skips
The BETONET Compact is a skip washing station with a water recycling system. The new equipment meets the jobsites requirement in general environmental aspects and more especifically on the High Environmental Quality jobsites. The station enables to put safely the SECATOL concrete skip on a unique place (whatever model is being used), and to retreive and treat the sludge from the washing process. The PH treated and recycled water can be used for further cleaning whilst the sludge can be disposed of without pollution risks. Whether a site or a pre cast plant, washing skips are essential to ensure efficient use and durability, therefore the more use, the more they will require cleaning, thereby increasing consumption of water. The recycling system if the BETONET offers a distinct advantage whilst caring for the environment.
this skip washing station is patented and complies will the european acutal legislation.
|
|
|
An isolator can be manufactured in two different modes: in rigid or flexible material. We have designed an isolator with mixed material (plexiglas and transparent pvc) in order to allow both resistance and flexibility.
|
|
Inert Atmosphere Heating
Atmospheric Glove Boxes
• Integrated systems for auto and manual operation
• For use with nickel, titanium, superalloys,
stainless steel and refractories
• Replacement for hydrogen belt furnaces
• Reduces a typical 25-minute, quartz lamp
heating cycle to just three minutes
• Ergonomics increase operator comfort & safety
|
|
MX-2000 Glovebox Atmospheric Chambers
Features:
- Wide choice of control capabilities
- Range of vacuum pumps
- Sturdy, rugged, modular design
- Optional programmable logic
- Optional single or dual-column gas purification units
|
|
General description :
Construction is similar to Scienceware® H50025-0000. The rear panel and cover can be easily detached and replaced without tools. Velcro® closures are used to attach the rear cover which overlaps the opening by 51mm (2") on all four sides. The integrity of the box and its atmosphere are preserved by a gasket on all four sides of the unit. Dimensions: 91cm (36") wide x 51cm (20") deep x 66cm (26") high. Rear panel opening 50cm (19 1/2") wide x 34cm (13 1/2") high.
Transparent acrylic fabrication
- Features two side-entry ports
- Large, rear panel opening
|
|
| ... products without technical information |
| |
Enraf introduced the automatic servo level gauging technology in the mid-fifties. Soon thereafter, we introduced the first automatic level gauge for bulk liquid storage tanks was be certified by leading Weights & Measures authorities.
The latest version is the unique Advanced Tank Gauge with only a few moving parts. The ATG and XTG series microprocessor-controlled servo gauges are compact and need only a 2" mounting flange.
The Enraf Servo gauge provides optimal measuring performance in any application, and can easily be integrated with existing SmartRadar, hydrostatic, or hybrid gauging installations.
Innovative ideas are geared towards user satisfaction. After more than 45 years, Enraf is still the driving force in tank gauging.
|
|
|
The Barksdale Tank Level Indicating Systems are sensors for remote indication level of liquid media. They operate according to the float principle with magnetic trans-mission (Permanent magnet, Reed switch and resistor chain). The liquid level is indicated on indicating instruments connected to the sensor.
|
|
KONTINUIELICHE LEVEL MEASUREMENT
- capacitive level probes for liquids and bulks in
High-grade steel or plastic one, exit 4-20mA, for vertical installation, for
aggressive media, remarks with removable head and
exchangeable or shortenable probe staff
- Niveausonden with float principle, for liquids, exit 4-20mA
or resistance signal, Kundensprezifi remarks, in high-grade steel
or plastic ones
Level border conditions: Capacitive contactors,
optical contactors,
Float switch
|
|
|
|
|
|
|
WEKA tank level indicators are suitable not only for general liquid level measuring applications, but are also a cost-effective means of detecting interface levels between dissimilar liquids. These sensors are unaffected by temperature and pressure, and provide a stable and linear signal output, even with the existence of liquid agitation or the presence of a foam layer. Their ruggedness meets the requirements of the toughest operating conditions, including military applications. They are available in different configurations to so that an optimum solution can be offered for any level measuring range. With only one moving part, these sensors are simple, reliable, virtually maintenance-free, and easy to service, if such a need arises. WEKA has unique capabilities in precision fabrication of stainless steel and other specialized corrosion-resistant metals. This, together with our large selection of float designs, allows us to offer level measuring solutions precisely tailored to your needs.
|
|
| ... products without technical information |
| |
The first quality conforms to standards ANSI Z.358.1 and DIN 12899
Heated water
Control temperature
Activation by platform
Very resistant
Choice of the capacity of the tank
Great choice of options
|
|
|
A heavy-duty range of emergency showers with an integral storage tank, recommended where warm water is required or a constant supply of water cannot be guaranteed. All outdoor models are pre-insulated and heaters are not fitted to those intended for use in hot climates. Tropical models can be fitted with optional sun shields for extra protection from solar heating.
|
|
|
Tank shower available in 350L, 800, 1000, 1200 & 1500L sizes, suitable for any environemnt including arctic and marine. All with stainless steel frame and walk on platform. Many otional extras available including panels, sump, eyebaths, lights, spring loaded doors etc
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
