|
|
Horizontal continuous mixers
continuously and fully automatically mix cement-based ready-mixed dry mortars (e.g. masonry mortars, jointing mortars, levelling compounds, bonding / reinforcing mortars, etc.) into ready-to-use materials. Depending on the model design, these machines can be used either with bagged material only or with bagged and optionally silo material, or only with silo material.
|
|
ORU MB Pan mixer with two horizontal shafts, counter-rotating and synchronized with each other, are characterized by their big output per cycle and are ideal for the preparation of various types of concrete: from concrete for civil and industrial construction, to light concretes made with materials of low specific weight, to mixtures for subfloors and road subgrades. Moreover, the particular configuration of the mixing devices makes it possible to use coarse aggregates (with grain sizes >150 mm).
They are mainly utilized when big concrete outputs are needed: plants for truck mixer feeding and plants for dams.
|
|
Concrete mixers - Self-loading concrete mixer weighers
Excellent for the mixing of concrete, gravel, mortar...
The rotation of the concrete mixer in the mixing direction allows the loading of aggregates.
A manometer (pressure gauge) can be seen from the driver's cabin. It allows the dosage control at each step.
By keeping the mixer turning, it is possible to keep on mixing while transfering onto the delivery site.
By reversing the direction of rotation the requested quantity is discharged on the chosen place.
|
|
SW5317GJB Main Specification
Drum Capacity 12 m3/14 m3
Engine Model Steyr WD615.69
Rated Power 247 kw
Drvie Model 8 x 4
SW5317GJB adopts advanced design. On the basis of integrating the advantages of various mixers home and abroad, with optimized CAD, the mixing drum is divided into three sections in the shape of a pear. According to the moving pattern of concrete inside the mixing drum, different section is made of quality hard wearing 16Mn steel plate with varied thickness, lengthening the service life as well as achieving synchronous wearing of the mixing drum body and blades.
|
|
|
These 4x4 concrete mixers feature high stability, even with a full load and on difficult and rough stretches. High-tensile electrowelded steel frame, articulated with oscillating bridge for greater stability, and double soft-system jack. Even though small, the concrete mixers of the DB 110 and DB 180 series confirm the high standard of the equipment designed to assist the operator. Stan-dard production includes automatic mechanical closing of the loading shovel to prevent material spillage during loading into the drum. Water tank positioned at the front for better weight distribution in order to always operate in safety conditions. FIORI makes enormous and continuous efforts to improve the safety of the concrete mixers. Unique in its 1 cu m category the DB 110 is fitted standard with 3 windows and driving reversibility. The DB 180 can also have a closed cabin.
|
|
|
|
|
|
Variomec 1050 M is part of the Normet's Variomec-system. The Variomec -system consist of Normet 10 tonnes carrier, a 6 m3 Dump kit, Lift kit with 9 m lifting height and the Mixkit what is used in Variomec 1050 M concrete transporter. Variomec can be easily varied from one product configuration to another, because the kits are fitted to the carrier using standardized connections.
Variomec 1050 M has practical concrete carrying capacity of 4,4 m3 and is designed for concrete transportation in underground mines and tunnels where tramming height is 2,6 m or more. The concrete discharge height of the drum is 1,45 m.
The powerful liquid cooled turbo charged 120 kW TIER 3 classified engine provides clean and efficient operation.
The FOPS and ROPS proofed safety canopy / cabin provides superior visibility and comfortable compartment for the driver and his assistant. The enclosed cabin provides noise level < 75 dB.
Utimec 1500 Transmixer with practical concrete carrying capacity of 4,4 m3 and is designed for concrete transportation in underground mines and tunnels where tramming height is 2,4 m (8,0 feet) or more.
The standard drum lifter feature allows flexible adjustment of the concrete discharge height up to 1,9 m making it possible to discharge the load also in circumstances where receptive unit is not on the same angle or same level as the concrete transporter.
The FOPS and ROPS proofed safety canopy / cabin provides superior visibility and comfortable compartment for the driver and his assistant. The enclosed cabin provides noise level < 75 dB.
Utimec LF 500 Transmixer with practical concrete carrying capacity of 4,4 m3 and with small
12.00-20 series tyres is designed for fast concrete transportation in underground mines and
tunnels where tramming height is 2,4 m (8,0 feet) or more and where extremely high tractive
effort (190 kN) is needed.
The powerful liquid cooled turbo charged 170 kW TIER 3 approved engine provides clean
and efficient operation and gives maximum speed of 9 km/h (7 km/h) fully loaded in upward
inclined 1:7 (1:5) tunnel. In horizontal tunnel the maximum speed is 16 km/h.
The standard drum lifter feature allows flexible adjustment of the concrete discharge height
up to 1,9 m making it possible to discharge the load also in circumstances where receptive
unit is not on the same angle or same level as the concrete transporter.
The FOPS and ROPS proofed safety canopy / cabin provides superior visibility and
comfortable compartment for the driver and his assistant. The enclosed cabin provides noise
level < 75 dB.
|
|
Utimec LF 600 Transmixer with practical concrete carrying capacity of 5,6 m3 is designed for
heavy concrete transportation in underground mines and tunnels where tramming height is 2,6 m (8,7 feet) or more.
The powerful liquid cooled turbo charged 170 kW TIER 3 approved engine provides clean and efficient operation and gives maximum speed of 8 km/h (6 km/h) fully loaded in upward inclined 1:7 (1: 5) tunnel. In horizontal tunnel the maximum speed is 18 km/h.
The standard drum lifter feature allows flexible adjustment of the concrete discharge height up to 2,1 m making it possible to discharge the load also in circumstances where receptive unit is not on the same angle or same level as the concrete transporter.
The FOPS and ROPS proofed safety canopy / cabin provides superior visibility and comfortable compartment for the driver and his assistant. The enclosed cabin provides noise level < 75 dB.
|
|
Utimec 1600 Agitator is designed for heavy concrete mixing and transportation in underground mines and tunnels where tramming height is 3,3 m or more.
The inclined agitator drum has 6 m3 concrete transportation capacity. The adjustable rotation speed up to 13 rpm provides superior mixing.
The powerful liquid cooled turbo charged Deutz 155 kW or Daimler 170 kW Tier 3 classified engine options provides clean and efficient operation. Maximum speed in horizontal tunnel is 18 km/h. Electromagnetic type retarder monted in a driveline is recommended standard option on inclined tunnels deeper than 1:10 and longer than 1000 m.
The FOPS and ROPS proofed safety canopy / cabin provides superior visibility and comfortable compartment for the driver and his assistant. The enclosed cabin provides noise level < 75 dB.
|
|
|
The new-concept system called Mixer 4000, manufactured by FIORI spa, is a flexible self-propelled system for the production of concrete and cement mixes directly on site; the materials are transported separately in special containers and mixed only during unloading. With all the features and advantages of the more advanced truck of the DB series, it consists of a water container, a cement container, a hopper for the aggregates and a horizontal continuous mixer. The cement is loaded through the hydraulically openable hatch with a vertical silo with screw, by means of transilos, otherwise with a bag-breaking screw or directly from the concrete mixing system. The water is drawn by means of the same autopriming pump as the DB series using the same procedure.
|
|
The NUVM 1.5 Compact volumetric mixer is flexible and therefore ideal for precast applications as a static unit, great for remote locations trailer mounted where it can be towed to site and reloaded, and invaluable for towns and cities when mounted on a 7.5t truck where access is a problem for larger mixers.
The NUVM1.25 can produce 1m³ within three minutes and can also be used to produce screed or mortar, with a constant production rate at any cement content.
Available as a:
Static unit
Trailer mounted*
Truck mounted**
- Suitable for small precast applications in static version
- Trailer mounted can be left on site and reloaded
- Ideal for restricted access and small loads mounted on a 7.5t truck
- Mixes 1m³ in under 3 minutes
- Can be used for concrete, screed or mortar
*Trailer weight 2000kgs, suitable towing vehicle required. Amount of material carried will be dependent on gross vehicle towing weight.
** Can be mounted to a suitable 7.5t truck.
|
|
|
|
|
|
Nurock Mixers
* Remote control with simple one switch operation
* Hydraulic mixer swivel and chute couple with 3 x 1m aluminum chute extensions providing excellent concrete placement
* Pneumatic vibrators (4 on sand hopper, 2 on cement hopper) providing positive feed of materials
* Dual admixture system, Hi and Lo flow for value added concretes
* Wooden protective boards fitted to sand and stone hoppers
* Removable hopper centre panels for aggregate use
* Trigger activated lubrication system, providing lubrication where and when it's needed without wastage
* Polypropylene water tank for durability
* Industrial polyurethane coating provides protection in aggressive environments, specially developed for off shore applications
* Stainless steel conveyor belt fittings for longer life
* Flame hardened solid steel conveyer sprockets
* Adjustable conveyer belt scraper to keep belt free from material build up
* System designed from the outset to have low maintenance cycles and uses high grade materials throughout to ensure this
Specification
Total concrete production: Up to 7.6m3
|
|
|
|
|
|
Nurock Mixers
* Remote control with simple one switch operation
* Hydraulic mixer swivel and chute couple with 3 x 1m aluminum chute extensions providing excellent concrete placement
* Pneumatic vibrators (4 on sand hopper, 2 on cement hopper) providing positive feed of materials
* Dual admixture system, Hi and Lo flow for value added concretes
* Wooden protective boards fitted to sand and stone hoppers
* Removable hopper centre panels for aggregate use
* Trigger activated lubrication system, providing lubrication where and when it's needed without wastage
* Polypropylene water tank for durability
* Industrial polyurethane coating provides protection in aggressive environments, specially developed for off shore applications
* Stainless steel conveyor belt fittings for longer life
* Flame hardened solid steel conveyer sprockets
* Adjustable conveyer belt scraper to keep belt free from material build up
* System designed from the outset to have low maintenance cycles and uses high grade materials throughout to ensure this
Specification
Total concrete production: Up to 9.2m3
Aggregate: 11.5m3
Cement: 2.4m3
Water: 2000 Ltrs
|
|
|
|
|
|
|
The cabin is mounted on a silent block to prevent vibrations inside the cabin. Both water tanks are also mounted on a silent block.Radiator in alluminium. Thanks to the patented system the drum turns until the unloading mouth is directly at the front near the driver’s seat. In this way, the material can be unloaded keeping an eye on the casting area while driving. This is particularly useful when unloading on the wrong side. In addition, again for the safety and convenience of the operator, the texture of the concrete can be checked directly from the driver’s seat without having to get out of the cabin. Easy accessibility for maintenance on the engine and the components of the hydraulic circuit. Thanks to the particular design, studied to reduce manoeuvres during loading with the shovel, the Zeta kinematic mechanism makes the self-loading system look like a sort of “wheel-loader” shovel with enormous advantages and time saving. Lifting system with double-acting return and soft-stop braking system.
|
|
CARMIX 25FX
Drum capacity: 3450 liters
Concrete output: 2,5 m3 per batch
Productivity: 4 cycles/hour
Transmission: Bosch Rexroth. 4 wheel driving
Engine: Turbo diesel JCB 444TC, water cooled, 4 cylinders. Power 63 KW (85HP) set at 2200 r.p.m.
Reversible driving seat with automatic inversion of hydraulic steering circuit and ROPS/FOPS canopy
|
|
CARMIX ONE
Drum Capacity: 1400 liters
Real concrete output: 1 m3 per batch
Articulated chassis
Hydrostatic transmission. 4 wheel driving
Engine: Diesel Cummins, A1700 water-cooled, 37 HP
Reversible seat with automatic inversion of hydraulic steering circuit. ROPS-FOPS Canopy
|
|
CARMIX 2.5
Drum capacity: 3400 liters
Concrete output: 2,5 m3 per batch
Productivity: 4 cycles/hour
Transmission: Bosch Rexroth. 4 wheel driving
Engine: Diesel PERKINS 1104 C-44 water-cooled, 4 cylinders, 85 HP
The mixing unit is slewing hydraulically through 300° for high discharge at 1,9 m to the four sides of the vehicle
Front cab on side of loading shovel. ROPS-FOPS type complete of double closing door
Electronic weighing system (on request)
|
|
CARMIX 3.5T4
Drum Capacity 4.750 l
Concrete output: 3,5 m3 per batch
Productivity: 4 cycles/hour
Transmission: Bosch Rexroth. 4 wheel driving
Engine Diesel PERKINS 1104C-44TA Turbo, water-cooled, 4 cylinders
The mixing unit is slewing hydraulically through 300° for high discharge over 2 m to the four sides of the vehicle
Front cab on side of loading shovel. ROPS-FOPS type complete of double closing door
4 wheel steering
Electronic weighing system (on request)
|
|
CARMIX 5.5 XL
Drum Capacity: 7.600 liters
Concrete output: 5,5 m3 per batch
Maximum speed: 33 km/h
Road transfer from 0 to 30 km/h
Transmission: Hydrostatic, Hydromatic-Rexroth. 4 wheel driving
Engine: Cummins Turbo-Diesel B5.9 TAA, 150 HP
4 wheel steering
ROPS-FOPS driving seat complete with double closing door
Weighing: Electronic System. “Load Cells” acting on the drum, display and printer in the cab (on request)
|
|
AUTO CONCRETE MIXER. MAX. WORKING LOAD: 1.000 LITRES. ENGINE: 50 H.P. TRANSMISION: HYDROSTATIC. SWIVEL CABIN.
Auto concrete mixer. Single drive. Hydrostatic transmisión. Perkins diesel engine, model 404 C, four cylinders. 50 H.P. Water cooled. Hydraulic steering. Hydraulic brakes. Electrical start and stop. Mixing drum volume: 1000 L. Front and loading. Swivel cabin. Water self-supplying (300 litres) by automatic suction pump and litres meter (200 l/m). Aceleration level. Cleaning equipment. High pressure pump with pistol. Flashing beacon. Conductor’s protective ceiling. Hour meter. Audible reverse warning signal. Safety belt.
|
|
The name PUMI comes from Pump and Mixer. It places small amounts of concrete within the shortest of time and at lowest costs.
The PUMI transports concrete like a common truckmixer. And - on the construction site - it pumps and places the material like a truck mounted concrete pump.
The advantages of the PUMI at a glance:
Ideal for small and average-sized construction sites.
Driven and operated by one and the same person.
Truckmixer, pump and placing boom as a compact unit.
This means for you new markets, more profit and the guarantee for future turnover
Minimum space requirement
|
|
Mixers
Towable Mixers
Multiquip's plaster/mortar and concrete mixers are the preferred brand for contractors and the equipment rental industry nationwide because no other manufacturer delivers such an extensive range of features, quality and engineering excellence.
Portable MIxers
The portable Mix-N-Go mixers, available with polyethylene or steel drums, are ideal for jobs including small footings and bases, binding block and concrete patching. They're sturdy enough to mix 3 cubic feet (85 liters) of material.
Stationary Mixers
This 12-cubic-foot (340 liters) capacity plaster/mortar mixer is a stationary model that eliminates the bulky undercarriage on tow-behind mixers. This, along with standard forklift pockets, allows a forklift to pick up, and safely move, the mixer.
|
|
|
|
|
|
THE WIDER RANGE FOR THE BEST CONCRETE:
The L&T Mixers for trucks are a real system for concrete mixing and transport according to high quality and functional standards. Each technical detail has been conceived, designed and realized in order to make the mixers work in perfect harmony with the truck chassis destined for their transport. The Mixers for trucks are an excellent instrument in the service of the modern sites at low operating costs. A wide range of capacities from 4 to 12 m3 of vibrated concrete always guarantees low tares and optimised carrying capacities.
The special design of the mixing blades guarantees a mixing homogeneity in all the drum sections, thus keeping the characteristics of the transported concrete unchanged. The L&T Mixers for trucks fully meet the DIN 1045 - DIN 459 - AS 1379 : 97/ A mdt 1-2000 norms with regard to the mixing capacity with dry feeding.
REDUCED CONSUMPTION:
All L&T Mixers for trucks are equipped with hydraulic transmissions and gearboxes that allow to reach the maximum rotation speed of the mixing drum when the vehicle is at 1500 revolutions/1' (in comparison with the usual 1800 revolutions/1'). Such a characteristic allows to diminish the fuel consumption, to reduce the wear and tear and to respect the environment (thanks to the low sound emissions).
|
|
|
The BOOMIX® truck mixer pumps are a high-quality and functional concrete casting system. Each detail is thought-out, designed and built for operating the truck-mounted pumps in perfect harmony with the frames of the vehicles designed to carry them. The accurate design and the use of special steels guarantee a sturdy structure with a high resistance to wear.
|
|
Our mixers have set the standard for reliability and durability. New product development has added to this excellent reputation.
PREMIER XT
Designed for extra durability to cope with the most demanding site conditions
MINIMIX 150 The UK’s No.1 mixer, improved with a new drive, easier assembly, increased durability, smoother tipping...and stylish looks.
TRACT MIX
A range of road-towable site mixers built for high performance & portability
MINIMIX 130
A highly portable lightweight mixer with direct drive, ideal for home use (export only).
MAXI With hand wheel tipping, for medium output site work.
TUBMIX 50 Universal mixer for mortar, tile adhesives, cement, paint and epoxy resins
|
|
Already in the year 1888 the first BHS Twin-Shaft Batch Mixer was manufactured and filed for patent. Since then, BHS has fabricated several thousands of Twin-Shaft Mixers and is now the leading company worldwide concerning the number of machines which are installed in the concrete industry.
Our customers benefit from our wealth of experience. We offer perfected and reliable solutions based on state-of-the-art technology.
BHS supplies manifold batch sizes to cover any specific need. A wide choice of accessories and options enables us to adapt the mixer exactly to your requirements.
|
|
Twin Shaft Batch Mixer
8, 10 & 13 cu yd or 6, 7.5 & 10 m 3
Mixing System
* Reaches 85% uniformity after only 15 seconds, 95% uniformity after 30 second.
* Approximately 30% of one mixing blade rotation is exposed to ear on the mixer trough bottom.
* Crossover of two mixing circles creates a high degree of turbulence.
* The mixing arms are arranged on hexagonal mixing shafts forming an interrupted spiral to produce an intensive mixing motion.
Details
* Mixers are equipped with high-quality hexagonal shafts for optimum torsional and flexural rigidity.
* The mixer drive has a single electric motor driven reduction/timing gearbox to insure uniform distribution of power to the twin mixing shafts.
* Mixers are equipped with oversized round body discharge gate(s). This increases production capacity because more rapid discharge will yield more cycles per hour.
|
|
Conrete-Mixing Systems
A selection of concrete mixing systems (along with their respective materials-handling and warehousing equipment) completes the Hess Group's wide range of products.
These systems are customized to meet the specific needs of the concrete-block and concrete-tube manufacturing sector.
|
|
|
The turbomixer MT 130 E mixes water and cement. The unit is powered by an electric motor that transmits the motion to the centrifugal pump by V-belts. The electric motor is equipped with belt tension screws. The carter protects the belt/pulley unit. The turbomixer is complete with inspection door.
|
|
Batch / Paddle mixers
are suitable for pre-mixing different components, ready-mixed dry mortars on cement basis, as well as self-mixtures, SPCC-restoration mortars, and PCC-restoration mortars. In combination with a conveying pump, semi-automatic operation is possible.
|
|
- Model: AM6 FHC
- Nominal capacity: 6 m3
- geom Volume: 11.700 L
- F illing ratio: 51,3 %
- Water Line: 7.100 L
- Drive: PTO
|
|
|
|
