|
|
Profibus connector - EasyConn PB
The bus connector EasyConn provides all test functions that speed up implementation and trouble shooting. Four LEDs, visible from two sides, indicate bus and device status.
The integrated EasyConn Controller works with a baudrate of up to 12Mbaud.
Features
• Cable slots with transparent covers
• Metal case ensures high interference immunity
• Cable connection via cutting-clamps
• Captive single-screw installation system
• Integrated switchable terminating resistor
• Integrated PU/diagnostic socket*
• 90°, 45° and 0° cable exit
• Status monitoring via integrated LEDs
Standard bus cable for fixed wiring Features
• Bus cable according to DIN 19245 and EN 50170
• Single core bare Cu wire
• 2 core stranded (red/green)
• Outer sheath PVC mixture (violet, RAL 4001)
• Flame-retardant acc. VDE 0472, Part 804, Proofing type B (IEC 332.1)
* only EasyConn PB 90°, 45°
|
|
Straight Connector, Female Thread
Straight Connector, Male Thread |
|
Current Rating: 3 amps max
Dielectric Withstanding Voltage:
600 VAC RMS
Insulation Resistance:
5000 Meg ohms min @ 500 VDC
Contact Resistance:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force:
Forces not to exceed 6 oz/contact
Temperature Cycling:
-55 ° C to +125 ° C, 5 cycles
Humidity (Mated):
IAW MIL-STD-1344, Method 1002.2, Type II, Omit Steps 7A & 7B
Vibration:
IAW-MIL-STD-1344, Method 205.1, Test Condition IV, 20 g's
Mechanical Shock:
IAW-MIL-STD-1344, Method 2004.1, Test Condition E, 50 g's
Durability:
500 cycles
Contact Resistance after Durability:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability:
Forces not to exceed 6 oz/contact
Salt Spray:
48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:
28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray:
28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray:
Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray:
Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing:
NASA SP-R-0022
Solder Heat & Contact Retention:
360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Solder ability:
MIL-STD-202, Method 208
|
|
EC³ connectors are the easiest attaching corrugated copper cable connectors made. No soldering is requiered for the attachment of any of the connectors. High quality silver plating is used on all parts in the electrical path, with electroless nickel plating on all mechanical parts.
They feature suprior electrical performances.
A full range of N, DIN and EIA EC³ connectors as well as tools, torque wrenches, additional connector sealing and adapters are available. |
|
Lapp Canada offers a redesigned line of Nema 4 rated power and signal circular connectors. Lapp's new technology allows the usage of one insulator for all types of connection. The removal and insertion of contacts is now possible without using tools with the capability to retrofit current applications.
These copper alloy/ nickel plated connectors are ideal where mating orientation is require, space is limited and connecting and disconnecting is desired. The new design of the coupling allows for use of both screw and push pull connections while still maintaining compatibility. The R2.5 signal series, which is available with 8+1, 9, 12, 16, or 17 contacts, has a patented insulation body which fits all housing designs, and can take both pin and socket contacts in all terminations variants: solder, solder cup, and crimping. The R3.0 series is the substitute for the R2.5 series allowing for more contacts including 21 or 26 contacts. Applications include servo drives, machine tools, measuring equipment, encoders, CNC machines, medical electronics, portable or mobile equipment, instrumentation, plus other applications. |
|
Lapp offers a redesigned line of Nema 4 rated power and signal circular connectors. Lapp's new technology allows the usage of one insulator for all types of connection. The removal and insertion of contacts is now possible without using tools with the capability to retrofit current applications.
These copper alloy/ nickel plated connectors are ideal where mating orientation is require, space is limited and connecting and disconnecting is desired. The new design of the coupling allows for use of both screw and push pull connections while still maintaining compatibility. The R2.5 signal series, which is available with 8+1, 9, 12, 16, or 17 contacts, has a patented insulation body which fits all housing designs, and can take both pin and socket contacts in all terminations variants: solder, solder cup, and crimping. The R3.0 series is the substitute for the R2.5 series allowing for more contacts including 21 or 26 contacts. Applications include servo drives, machine tools, measuring equipment, encoders, CNC machines, medical electronics, portable or mobile equipment, instrumentation, plus other applications. |
|
Fundamental research in particle physics as practised within CERN and other nuclear research establishments requires
more and more complex equipment of high performance in order to achieve the objectives. The needs of such research
contribute to the development of leading products for the whole of industry. For many years LEMO has participated in
this evolution. This has resulted in a range of miniature coaxial connectors (50 Ohm) with a push-pull self-latching system,
the LEMO 00.250 series. These connectors now form the basis of the NIM-CAMAC CD/N 549 standard. |
|
Rectangular connectors: industrial connectors, multipoint inserts connectors multicontacts, connectors, cases for inserts, base plates connectors, sealed connectors, etc
Cylindrical connectors: industrial round connectors, multipoint connectors multicontacts, connectors, multiple connectors, base plates connectors, sealed connectors, metal connectors IP68, M12 connectors, connectors, circular connectors plastic, M12 distributers, connectors, etc
Moulded cords M8, M12, M23, distributers, base plates and all types of interconnections
We carry out with the request the wiring of connectors |
|
Description:
PC/104 Stackthrough Connector - 2.54mm Pitch
Features:
2.54mm Pitch Dual Row, 12.2mm Solder tails
Finish:
Gold
|
|
The rugged, reliable and flexible industrial connectors as system components.
Also for BUS and fibre-optic cable applications.
Applications include electrical and telecommunications engineering, measuring, test and control technology, mechanical and equipment engineering.
EPIC® is a registered trademark of the Lapp Group in many countries, and the genuine product is therefore only available from Lapp. |
|
The terminals for printed circuit boards offer the possibility of establishing mechanical and electrical connections between wires and printed circuit boards. Our range only comprises screw terminals to secure an optimal electrical contact. They may be placed side by side and labelled.
In addition to one-step versions our range includes also two- and three-step terminals with compact design but important connecting capacity. The terminals are available with various cross sections and pin spacing. Our programm also comprises pluggable PCB terminal strips (with plugs and sockets) which enable electronic modules to be disconnected and easily replaced. |
|
Servometer manufactures many specialty electroforms which normal electroplating companies cannot produce. Our electroforms can be made with unusual shapes, and close tolerances. They are lightweight with a rugged structural rigidity.
Servometer Electroforms forms are produced by electrodepositing a thin layer of nickel onto an aluminum mandrel of any shape, then chemically dissolving the aluminum, leaving behind a thin shell of tough nickel, which is the electroform. Servometer has perfected this electroplating process over the years while producing millions of metal bellows, using the same technique.
Some advantages of Servometer electroforms:
- Light-weight combined with high toughness
- Limitless geometries are possible, even with varying cross sections
- They are manufacturable with varying wall
thickness in a single part
- Electroforms can be made integral with our bellows, eliminating the need for welding or soldering
- Diameters as small as 0.020 in.
- Close internal tolerances
- Extreme temperatures as low as -423°F below zero
Servometer can supply electroforms, which range from 0.020 in. to 8 in. cross section. Even larger parts are possible, for certain geometries. Typically, Servometer electroforms are nickel, but copper and gold are also available as a complete part, with lamina or a surface finish. Mirror finishes and low reflectance coatings can be provided as required. |
|
For sixty years, the HCC Industries family of companies has been providing the technological know-how to meet the unique requirements of the defense and aerospace industries, as well as those customers in other industries using circular connectors in their applications.
|
|
We manufacture earthing tapes and braided connectors in large and small quantities in standard designs as well as according to our
customers wishes. Different materials are at your disposal:
braided copper tapes
round stranded copper cables
PVC-insulated-copper cables
PVC-insulated braided copper tapes
silicone insulated copper cables
TPE-U insulated copper cables
welding cables and earthing ropes
braided stainless steel ropes
braided aluminium tapes |
|
EN60320 inlets range from Bulgin Components is specified for use in all types of electrical equipments, and has an impressive list of international approvals.
The standard range offers one of the most comprehensive range of the market.
Variants offered include: flange and snap-in type, PCB mounting, fused inlets, with or without filters, hot condition types, and inlets with integral suppression and capacitors.
To complement the range, appliance outlets to IEC320.2.2 are available with various mounting options and termination styles.
Mating connectors in rewirable and cordset form complete the range. |
|
EPIC ® rectangular, circular, and pin & sleeve power and control signal connectors are the soultion in applications where reliability, durability, and flexibility are of key importance. Product configurations are available to handle application requirements up to 1000 Volts, 125 Amps, and 280 contacts. Connector enclostures provide a wide range of environmental protection with ratings of IP 65, 67, 68 and NEMA 4, 4X, and 12. All EPIC ® connectors products are UL and CSA listed. Our most popular connectors are typically shipped within 24 - 48 hours.
|
|
The EPZ series has been developed to provide transient equi-potential bonding.
It is used in applications such as lightning protection grounding where for instance a “clean” signal ground can not be directly connected to a “dirty” power system ground, of in oil and gas pipelines to protect insulated flanges from flash-overs during direct or nearby lightning discharges or when ground faults of nearby power transmission lines can cause large potential gradients across these flanges.
It is also used to prevent dangerous potential differences from developing between equipment and adjacent metallic structures (metal pylons, cables, tubes) during lightning discharges.
Location of use: Exposed environments or direct burial
Protection element: GDT
High surge discharge rating: Imax = 100kA
Housing: Corrosion resistant enclosure with hermetic environmental seal and flying leads for ease of connection
|
|
| High Speed connector series for the Advanced Mezzanine Card according to the AdvancedTCA and MicroTCA standards. Also MCH plugs for MicroTCA. |
|
| High Speed connector series for the Advanced Mezzanine Card according to the AdvancedTCA and MicroTCA standards. Also MCH plugs for MicroTCA. |
|
Features - DRS
Specifications - Materials & Finishes
Insulator
-Polyphenylene Sulfide per MIL-M-24519, Type GST 40F, Black
Contact Material
-Pins - Beryllium Copper per ASTM B194, Alloy C17200
-Socket - Copper Alloy per MIL-DTL-83513
Contact Finish
-Gold plate per ASTM B488, Type II (Hard Gold), Code C, Class 1.27 (.000050)
Standard Termination Finish on Integral Tails
-Pin - Solder plated per AMS-P-81728 (Non-RoHS)
-Socket - Solder per J-STD-006 (Non-RoHS)
RoHS Termination Finish on Integral Tails
-Pin - Hard gold plate per ASTM B488
-Socket - Hard gold plate per ASTM B488
Standard Termination Finish on Soldercups
-Pin - Solder plated per AMS-P-81728 (Non-RoHS)
-Socket - Hard gold plate per ASTM B488
RoHS Termination Finish on Soldercups
-Pin - Hard gold plate per ASTM B488
Latch
-Beryllium Copper per ASTM B194
Latch Finish
-Electroless Nickel per AMS-C-26074
Guide Post
-Brass per ASTM B16, Alloy C36000
Guide Post Finish
-Electroless Nickel per AMS-C-26074
Guide Post (DRS ONLY)
-303 Stainless Steel per ASTM A582
Wire - Standard
-26 AWG, 7 Strand, Type E per NEMA HP3
Jack Post & Screw Receptacle (DRP ONLY)
-303 Stainless Steel per ASTM A582, Passivate per QQ-P-35
Retaining Screw (DRS ONLY)
-303 Stainless Steel per ASTM A582, Passivate per QQ-P-35
|
|
Current Rating: 3 amps max
Dielectric Withstanding Voltage:
600 VAC RMS
Insulation Resistance:
5000 Meg ohms min @ 500 VDC
Contact Resistance:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force:
Forces not to exceed 6 oz/contact
Temperature Cycling:
-55 ° C to +125 ° C, 5 cycles
Humidity (Mated):
IAW MIL-STD-1344, Method 1002.2, Type II, Omit Steps 7A & 7B
Vibration:
IAW-MIL-STD-1344, Method 205.1, Test Condition IV, 20 g's
Mechanical Shock:
IAW-MIL-STD-1344, Method 2004.1, Test Condition E, 50 g's
Durability:
500 cycles
Contact Resistance after Durability:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability:
Forces not to exceed 6 oz/contact
Salt Spray:
48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:
28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray:
28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray:
Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray:
Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing:
NASA SP-R-0022
Solder Heat & Contact Retention:
360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Solder ability:
MIL-STD-202, Method 208
|
|
Bi-Lobe® - Standard Metal Shell Nano Offset Connectors
Sizes are 9,15, 21, 25, 31, 37,51 & 65 pin, at .025 Mil. Pitch (Currently Available)
Mating Pin & Socket models available
All sizes with 18" pre-wired leads
Wiring is Color Coded IAW MIL-STD-681, System 1, using ten solid repeating colors
All sizes Horizontal Surface Mount
All sizes Flex-Circuit Mount
All sizes Vertical Surface Mount
All sizes Straight Thru Hole Mount
All sizes Panel Mount Versions (Female Only)
Shells are factory installed
|
|
The rugged, reliable and flexible industrial connectors as system components.
Also for BUS and fibre-optic cable applications.
Applications include electrical and telecommunications engineering, measuring, test and control technology, mechanical and equipment engineering.
EPIC® is a registered trademark of the Lapp Group in many countries, and the genuine product is therefore only available from Lapp. |
|
The modular design of the LEMO range provides over 50'000 connectors from miniature ø 3 mm to ø 50 mm, capable of handling cable diameters up to 30 mm and for up to 106 contacts.
This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommunications and military. |
|
Panel Connector, Male Thread, Front Mounting
Panel Connector with knurled Nut, Front Mounting
Right Angle Panel Connector, Male Thread, rotating |
|
Cavotec Connectors are robustly designed for use in harsh and difficult environments such as mines, tunnelling, marine applications, steel works, railways, ports, bulk and container terminals.
The low voltage range starts at 15A and goes up to 660A, 15kV with electrical or mechanical interlocking.
They can be delivered in our own standard manufactured panels, including short-circuit breakers. A range of multi-pin outlets for control cables are also in the product range with a max of 50 pins and 15 Amps.
|
|
HCC has a long history of manufacturing D-Subminiature, Rack & Panel and Micro-D Subminiature connectors. Specifically, we have the capability to manufacture to the following mil specs, as well as produce customized product.
|
|
Right Angle Connector, Male Thread
Right Angle Connector, Male Thread, EMC
Right Angle Connector, Male Thread, MZ
Right Angle Connector, Male Thread, MZ EMC
Right Angle Connector, Female Thread
Right Angle Connector, Female Thread, EMC
Right Angle Connector, Female Thread, MZ
Right Angle Connector, Female Thread, MZ EMC |
|
|
