|
|
|
|
|
|
ERmet ZD connectors were specially developed for differential high-speed signal transmission in telecom applications with data rates of up to 10Gbits/sec.
This robust, high quality modular connector system is just as well-suited for use in conjunction with the 2mm HM (IED 61076-4-101) ERmet line of connectors.
The inline design of the signal and ground contacts makes simple, economic routing (conductor track routing) possible. Signal and ground contacts have different connection levels with a gap of 1.5mm, thus ensuring a safe connection. In addition, the contacts are assembled into a robust housing.
The ERmet ZD connector utilizes an optimal grid construction that reduces signal interference and offers ample room for conductor track routing. Its optimized design and effective shielding allow the ERmet ZD system to exhibit superb performance when it comes to crosstalk and reflections.
The ERmet ZD connector has been selected as the backplane interconnect for the PICMG 3.x (ATCA) industry standard.
|
|
|
Known for their reliability and precision, Fischer Connectors' products are globally exploited in the high-end instrumentation field, for applications like environmental analysis equipments, hazard warning and telemetry systems, mass spectrometers or vacuum generators.
|
|
|
ERNI M8/M12 circular connectors can be used to implement a flexible I/O or field bus connection on the circuit board. With the modular design concept, connectors can be quickly and easily manufactured in different heights and versions, e.g. 2-, 3-, 4- and 5- pin M12 connectors as well as 3- and 4-pin M8 connectors. We use a variety of SMT, pressfit or THR technology, depending on the customer's requirements. M12 connectors are currently recommended as field bus connectors for almost all field bus specifications, and are also available with coding. The introduction of the new M8/M12 connectors illustrates ERNI's commitment to develop a reliable and flexible I/O or field bus connection on the circuit board.
|
|
The BradConnectivity line of Ethernet products combines standard RJ-45 connection technology with the industrially proven form-factor, or by utilizing industry-standard Micro-Change M12 connection technology. The result is a lineup of products designed to preserve the integrity of your data transmission even in the harshest settings.
Also available with the Ultra-Lock connection system.
|
|
|
Miniature connectors (also referred to as "Mini DIN"), including S-VHS, and DIN connectors according to DIN 455321, mating compatible to IEC 60130-9. 3-8 poles. For signal and load currents up to 4 A.
|
|
|
The SS Series and SSC Series short plugs feature an innovative design and lightweight, miniature construction for applications requiring space saving and high pin density configurations. The 102 series, for example, is available with up to nine pins in a 9mm diameter.
|
|
FEATURES
* Color Coded
* Mechanical Voltage Keys
* Flat wiping contacts
* Genderless Housings
* Auxiliary Contacts - SBE®, SBO® and SBX®
* Fingerproof - SBE®, SBO®, and SBS®
|
|
Specially designed to ensure maximum user safety and electric shock protection, our 4032 and 405 series have fully insulated plastic connector bodies. The 405 Series is compatible with the equivalent 105 metallic Series.
For more information about the 4032 Series, refer to our “Plastic 4032 Series” catalogue by clicking on the link below.
For more information about the 405 Series, please refer to our catalogue “Plastic 405 Series” catalogue by clicking on the link below.
|
|
|
Fischer Connectors’ push-pull locking system provides unparalleled retention and prevents accidental disconnection. Self-locking, it is ideal for frequent connect/disconnect operations. Fully integrated into the connector housing, it contributes to compact equipment design.
|
|
For sixty years, the HCC Industries family of companies has been providing the technological know-how to meet the unique requirements of the defense and aerospace industries, as well as those customers in other industries using circular connectors in their applications.
NEW from Ametek SCP, a range of Rugged Gigabit Ethernet Connectors. Designed for use in very harsh environments and available in D38999 and MIL-C-24231 shell configurations. Certified by ETL to TIA/EIA 568 CAT 5E and CAT 6. PATENT PENDING.
|
|
|
Watertight IP68, gas-tight hermetically sealed, safe locking system, Fischer Connectors products are ideal for use under water (to a depth of 80 meters), in vacuum chambers, and in outdoor applications facing harsh weather conditions.
|
|
|
The SMC line of versatile connectors offers a great deal of design application flexibility. Different modules (such as straight and angled male and female multipin connectors) in combination with other options (e.g. IDC versions) afford users the freedom for an optimal assembly design. The connectors are reliably produced on state-of-the-art, fully automatic manufacturing machines. Due to the high contact density and small space required, SMC connectors offer a number of new application possibilities. The precision manufactured contact guarantee a reliable mate. SMC connectors are available in several different heights. The combination of standard profile and low male and female connectors support four different board-to-board stack heights (8.0 - 14.0mm).
|
|
Significantly 50% lighter than typical metal connectors, the new aluminium engineered Fischer AluLite Series is your solution to ultralight product design.
Ultralight, compact and offering excellent strength to weight ratio, the new Fischer AluLite range is ideal for mobile equipment, portable systems and hand-held devices. Available in a wide range of colors, the Fischer AluLite connectors easily integrate with your product design, while also offering a flexible color-coding system.
|
|
CMB
Screw coupling bronze connector for signal, control or power.
Intervehicle, roof or underframe location.
For harsh environment and several daily couplings.
6 shell sizes / 31 arrangements from 1 to 61 poles.
Removable hard insert / silver or gold plated crimp contacts.
Features & Benefits
Nominal current : from 15 A to 500 A
Service voltage : from 110 V AC to 1500 V DC
Test voltage : 2550 V, 3250 V or 5750 V
Protection index : IP66 mated with suitable backshell according to EN 60 529
Salt spray resistance : > 500 hours
Temperature range : -40 degC / +100 degC
Endurance : > 500 coupling cycles
NF F 61-030 standard compliance
For very harsh environment
Fire behaviour : requirement 2 following NF F 16-101 & NF F16-102
RoHS compliance
Standards and Quality Approvals
ALSTOM approval
Technology/ Coupling System
Environmentally Sealed
Screw thread
|
|
9 DFR / 9 DFR H
MIL-C-5015 connectors type especially designed for high temperature (+350°C max).
Stainless steel water-tight circular connectors with passivated finish with screwed locking. Available in 7 shell sizes and 8 arrangements from 3 to 61 contacts, with sizes 8 and 20. A plug, a squared and circular receptacle, hermetic versions and numerous accessories.
Features & Benefits
Mechanical durability: 3000 mating and unmating operations
Mechanical shocks: As per test 8A of CCTU 01 - 01 A
Durability temperature: Class 1: 1000 hours at 250C
Durability temperature: Class 2: 1000 hours at 350C
Vibrations As per CCTU 01 - 01 A and Spec. SNECMA YZ 185
Contact type: Crimp type - Nickel plated
Operating temperature range: Classe 1: -55C to +250C
Operating temperature range: Classe 2: -55C to +350C
Good vibration rating, Fire tests at 1093C
High temperature
Standards and Quality Approvals
NF-L 54145
Technology/ Coupling System
Hermetically Sealed
Environmentally Sealed
Screw thread
|
|
|
|
|
|
9316 series
Stainless steel circular connector that can be emerged underwater for high pressure saltwater applications.
Available in 7 shell sizes and 23 classic arrangements.
Explosion proof and hermetic versions also available.
Features & Benefits
Current rating: from 5A to 600A
Operating temperature range (standard): -55C to +125C
Operating temperature range (explosion proof connectors):-55C to +85C
Pressure rating: 750 bars for 9306 series
Pressure rating: 150 bars for 9316 series (hermetic receptacles)
7 shell sizes and 23 arrangements with gauge 0, 4, 8, 12, 16 and 20 available
Material: Stainless steel AISI 316 L passivated
Bronze screw coupling
500 mating and unmating cycles
Hermetic feedthru also available
Signal contacts to crimp, power contacts to solder, coaxial and optics contacts
Standards and Quality Approvals
Qualified for anti explosion EN 50014 and EN 50018
Technology/ Coupling System
Fibre Optic
Hermetically Sealed
Microwave
High power
Environmentally Sealed
Screw thread
|
|
|
|
|
|
DT
Deutsch DT Series of environmentally-sealed connectors are designed specifically for cable to cable applications on the engine or transmission, under the hood, on the chassis or in the cab. Where signal level circuits in harsh environmental conditions, where even a small degradation in connection may be critical, the Deutsch DT Series general purpose connectors will provide the reliability and performance at the lowest cost.
Thermoplastic (-55°C to +125°C rated) housings and silicone seals are used to allow the connector to withstand conditions of extreme temperature and moisture. The connector may be employed with either solid-copper crimp type contacts for critical circuits or budget-minded stamped and formed contacts. In either selection, the spring action is designed in the socket and shrouded by a stainless steel hood that provides closed entry for positive axial alignment during mating, and eliminates probe damage from occurring. Contact insertion and withdrawal require no special tools and are retained in locked position by dielectric fingers, molded as an integral part of the housing. Contrasting coloured secondary locks are assembled at the mating interfaces. If by change the secondary locks are not properly seated during assembly, they will be pressed into locked position during the mating of the connector.
If you want your electrical system to be trouble free, providing years of service at the lowest cost…specifiy the Deutsch DT Series connector.
|
|
|
|
|
|
983 R / RS / W / WS
Fine threaded coupling electrical connectors with secure self locking for engines, under carriages, APU and pylon applications and harsh environments.
All electrical connectors Deutsch 983 series are intermatable and interchangeable with connectors in accordance with MIL-C-83723 series III and NF-L-54143
Features & Benefits
Shell: Material: R & RS: Aluminium nickel: / W & WS: Aluminium olive drab cadmium
Insert: Material: R, RS, W & WS: Thermo-setting and silicone
Contacts: Crimp type, removable, plating gold
Operating temperature range: R & RS: -65C to +200C : W & WS: -65C to +175C
Salt spray resistance : W &WS: 500 h / R&RS : 96 h
Shell to shell metal bottoming (Plug and receptacle mated)
Anti-rotation system on 360 by tightening - Self-locking system all plug
Reduced elastomer barriers to use new and old generations of wires
High temperature resistance
Long duration salt spray
Standards and Quality Approvals
EN2997
SBAC ESC10
Boeing BACC63
EN3155
ESC30
MIL-C-39029
MIL-C-83723 Series III
Technology/ Coupling System
Environmentally Sealed
Screw thread
|
|
Arinc 600 Aerospace Standard
Rectangular Avionics Connectors
• Signal, power, databus and coaxial contacts
• Pin size/current: size 22, 20, 16 and 12 contacts have 5A, 7.5A, 13.0A and 23.0A current rating respectively
• Approvals: conforms to MIL-C-81659 B, BACC 66 specifications
• Custom filtering and lightning protection
|
|
ARINC - 608A
ARINC Receivers and ITAs
* Receivers and ITAs are designed to accept Signal, Power, Coaxial, 18 GHz, and Blank modules.
* VPC provides 5, 10 and 21 module positions Receivers and ITAs with .075 centers.
* The 5 and 10 module Receivers are black anodized with one integrated microswitch.
* The 21 module Receiver is black anodized with two integrated microswitches-one microswitch is located in the handle to sense whether the handle is in the open or closed position; the other microswitch, located in one of the hangers, senses whether an ITA is engaged to the Receiver.
Connector Modules
* Modules are available in various configurations to meet specific testing needs for both the standard and FX Series interfaces.
* VPC offers six basic modules.
|
|
FCI offers a complete range of reliable, cost effective and innovative solutions for automotive applications. FCI provides connectors systems for engine, cockpit, safety, multimedia and other electronic applications. Through outstanding quality, cost competitiveness and delivery performance, FCI is recognized by its customers as their strategic partner.
Applications, products and services :
> Passenger cars & light vehicles
> Motorized vehicles
|
|
|
Amphenol is a leading supplier of interconnect systems for automotive safety devices. As the inventor of airbag and seatbelt pretensioner interconnect systems, Amphenol has defined the standards in this industry and continues its innovation leadership. In addition, Amphenol provides advanced interconnect solutions for the expanding electronics in automobiles including entertainment, communication, navigation and telematic modules. For selected applications such as engine control, sensors, actuators and auxiliary motors, Amphenol provides wiring components, custom overmolded devices, and harness assemblies. Amphenol's automotive core competencies include application-specific automotive interconnect solutions requiring a high degree of engineering and system integration.
|
|
Molex Launches MX150 Sealed Connector System
New Pre-assembled Design Offers Ease-of-Use and Affordability
The MX150™ Sealed Connector System from Molex Incorporated (NASDAQ: MOLX and MOLXA) is a submersible, environmentally sealed interconnection system designed to withstand harsh conditions. The MX150 Sealed Connector System is shipped in one piece and includes mat and interfacial seals, as well as housing and terminal position assurance (TPA). This pre-assembled design is easy to use and lowers applied costs because it does not require assembly of components and eliminates the need to purchase or handle wire seals. Simply insert a crimped terminal lead and seat the TPA into its final lock position.
|
|
The overmolding system offers follwing features:
- Clock cycle 20 sec. for 4 units
- Vertical plastics injection moulding machine
- Resistance welding unit for THT-Resistor
- Feeding stamping grid via endless metal carrier band
- Stamping, bending and separating unit for contact grid
- Special handling unit for feeding metal contact grid with welded-on resistor into molding form
- Molding form for 4 units (hot runner system)
- Testing and palletizing units
- Cycle time 20 sec. for 4 units
- Rohwedder services: Process planning, system development and design, complete supply and implementation of production line, production assistance (SOP)
|
|
ABBMS Series. ABBMS Bayonet connectors are based on Mil-C-5015 and are approved to BS9522-F0032, and conform to VG 95234 (Germany).
ABB Connectors feature bayonet lock coupling, crimp or solder contacts, protection against water ingress and excellent shielding and continuity characteristics between mated connectors.
The connectors are available with standard polychloroprene insulators which remains flexible at temperatures up to 125°C during a 1000 hour test programme.
A limited number of contact arrangements are available with high temperature insulators which operate between -40°C to +190°C. (HTABBMS)
|
|
|
|
|
|
SAL Connectors
The dimensions and construction of the CONEC SAL connector series comply with IEC 61076-2-101.
They are used in many applications in the field of automation technology for signal transmission, power transmission or for data communication in field bus technology.
...with overmoulded cables
reduce installation costs and save time drastically, through the use of connectors with integral wires.
The choice of material and the construction of the connector enable it to be used in a dirty and damp industrial environment.
...for special requirements
are often made of special materials concerning their chemical resistance and temperature stability. CONEC has developed special products for these areas. Special materials are available for a temperature range of 125°C for 6000 h.
Field attachable connectors ...
can be assembled freely and are often required for individual cable lengths, e.g. for the construction of special purpose machines.CONEC offers 4 and 5-pin models here in an axial and angled construction for connectors and adapters. In the angled construction the cable outlet is adjustable in a 90° pitch to the pin layout.
Chassis connectors
Installation flanges are used to produce an M12x1 connection on the device. A newly developed modular system makes it possible to produce a wide variety of combinations among one another.
Fieldbus technology ...
has increased dramatically in the industrial sector over the last few years. CONEC offers connectors for Profibus DP and Industrial Ethernet. Integral M12x1 connectors with corresponding pin layout coding (in acc. to IEC 61076-2-101 standards) are available for both bus systems.
|
|
|
|
|
|
Current Rating: 3 amps max
Dielectric Withstanding Voltage:
600 VAC RMS
Insulation Resistance:
5000 Meg ohms min @ 500 VDC
Contact Resistance:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force:
Forces not to exceed 6 oz/contact
Temperature Cycling:
-55 ° C to +125 ° C, 5 cycles
Humidity (Mated):
IAW MIL-STD-1344, Method 1002.2, Type II, Omit Steps 7A & 7B
Vibration:
IAW-MIL-STD-1344, Method 205.1, Test Condition IV, 20 g's
Mechanical Shock:
IAW-MIL-STD-1344, Method 2004.1, Test Condition E, 50 g's
Durability:
500 cycles
Contact Resistance after Durability:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability:
Forces not to exceed 6 oz/contact
Salt Spray:
48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Level Contact Resistance after Salt Spray:
28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray:
28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray:
Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray:
Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing:
NASA SP-R-0022
Solder Heat & Contact Retention:
360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Solder ability:
MIL-STD-202, Method 208
|
|
|
The M12 x 1 round connector family from ESCHA provides a wide range of robust and sophisticated components. A choice of pre-assembled and premoulded versions, flange connectors as well as field-wireable connectors, ranging from 3- to 12-pole versions are available for your application.
|
|
|
Hypertac circular connector range covers industrial market (through its M23, M40, M58 Series Metallic, Plastic and Inox), medical market (Push Pull D Series and Hypergrip with IP67 and shielded capability in cable clamp or overmolded version), mil-aero market (Future Combat Soldier Connectors, High Speed with filter capabilities and HBN connectors) and railway market (Balise connectors, M23 Series, Car-to-car Couplers). All applications can be equipped with custom solutions made on customer's requirement.
|
|
|
|
