|
|
The bearings of industrial rotating equipment operate under arduous conditions - often for considerable periods of time. The most reliable indicator of bearing condition is the temperature of the metal beneath the shoe.
Recognition of rising temperature can provide a warning of the breakdown of the lubricating oil film; thus allowing machine shutdown and maintenance to take place - avoiding the probable catastrophic failure of the bearing and possible damage to its mounting. Conax Miniature Bearing Sensors provide a simple and cost-effective method to monitor bearing temperatures.
Features:
- For embedded applications in rotating machines
- RTDs - 100 ohm platinum, 0.00385 ohm/ohm/°C
- Thermocouples types J, K, T & E
- Single and duplex sensors
- Various styles and sizes
- Operating Temperature: to 250° F ( 120° C)
|
|
Miniature Bearing (MBS) Sensor
A critical indication of the status of bearings on large rotating plant is provided by their running temperature.
Due to its small physical size the miniature bearing sensor can be positioned close to the bearing surface allowing it to sense any early change in temperature.
These devices are available in both thermocouple and PT100 resistance thermometer format and can be supplied as either single or duplex sensors. The sensor lead wire insulation is in PTFE and if necessary lead wire jackets can be protected with stainless steel outer braid.
BSWS Bearing sensor wire seal assemblies are low temperature/low pressure glands for embedded sensors to prevent oil wicking along the sensor leads. They seal on the individual insulated leads exiting an oil-filled bearing housing.
Typical aplications are motors, turbines, pumps & journal bearing pedestals.
|
|
|
Miniature Bearing Sensors are designed to monitor temperature of embedded bearings critical to machine performance in industrial rotating equipment. The most reliable indicator of bearing condition is the temperature of the metal beneath the bearing shoe. Rising temperatures indicates the breakdown of the lubricating oil film. Quick identification of this condition allows machine shutdown and maintenance to occur before catastrophic failure of the bearing itself. Typical applications for bearing sensors include motors, turbines, pumps, gear boxes and other journal bearing pedestals.
|
|
CSTU type for heating pipes, fluid transportation, etc
temperatures from -50°C to +200°C
Sensing element
1 x PT100 or PT1000 at 0°C, class B
2 or 3 wires, 4 mm² max section
Box
light alloy, IP43 protection , PG9 cable gland
|
|
The bearings of industrial rotating equipment operate under arduous conditions - often for considerable periods of time. The most reliable indicator of bearing condition is the temperature of the metal beneath the shoe.
Recognition of rising temperature can provide a warning of the breakdown of the lubricating oil film; thus allowing machine shutdown and maintenance to take place - avoiding the probable catastrophic failure of the bearing and possible damage to its mounting. Conax Miniature Bearing Sensors provide a simple and cost-effective method to monitor bearing temperatures.
Features:
- For embedded applications in rotating machines
- RTDs - 100 ohm platinum, 0.00385 ohm/ohm/°C
- Thermocouples types J, K, T & E
- Single and duplex sensors
- Various styles and sizes
- Operating Temperature: to 250° F ( 120° C)
|
|
Install miniature sensors in or beneath the babbitt layer of bearing shoes. They monitor metal temperature — the most reliable indicator of bearing condition — to give early warning of oil film breakdown. Machines can then be shut down and the problem corrected before catastrophic failure occurs.
While no larger than many bare ceramic elements, these RTDs have metal cases and insulated leads to withstand rough handling and harsh environments. They’re easy to install in drilled holes for general purpose sensing.
|
|
WDB Series Bearing Sensors
PTC Thermistor with fixed pre-set trip points from 50°C to 120°C
NTC Thermistor for continuous measurement up to 110°C
Long term reliability
Easy installation - replaces existing grease nipple
Extensive range of PTC sensors available from 50°C to 120°
For use with T400, T400 Elite, T500 Elite or Watchdog Elite control modules
|
|
A critical indication of the status of bearings on large rotating plant is provided by their running temperature.
Monitoring bearings in this manner provides the ability to recognise any possible upward trend in bearing temperature. This in turn allows for a regime of planned preventative maintainance to be put in place, offsetting the possibility of catastrophic plant failure.
Due to its small physical size the miniature bearing sensor can be positioned close to the bearing surface allowing it to sense any early change in temperature.
These devices are available in both thermocouple and PT100 resistance thermometer format and can be supplied as either single or duplex sensors. The sensor lead wire insulation is in PTFE or glass fibre and lead wire jackets can be protected with stainless steel outer braid.
|
|
|
Miniature Bearing Sensors are designed to monitor temperature of embedded bearings critical to machine performance in industrial rotating equipment. The most reliable indicator of bearing condition is the temperature of the metal beneath the bearing shoe. Rising temperatures indicates the breakdown of the lubricating oil film. Quick identification of this condition allows machine shutdown and maintenance to occur before catastrophic failure of the bearing itself. Typical applications for bearing sensors include motors, turbines, pumps, gear boxes and other journal bearing pedestals.
|
|
CSTU type for heating pipes, fluid transportation, etc
temperatures from -50°C to +200°C
Sensing element
1 x PT100 or PT1000 at 0°C, class B
2 or 3 wires, 4 mm² max section
Box
light alloy, IP43 protection , PG9 cable gland
|
|
Excellent Accuracy Precise, Rigid, and Lowest Noise
The highly precise and rigid NB Slide Way incorporates cylindrical rollers in two 90 degrees V-grooved rails. Designed for advanced technological applications, the Slide Way can bear loads and moments from all directions while maintaining extreme accuracy. The lowest frictional resistance and noise are achieved with "super precision" cylindrical rollers and "high accuracy" raceway surfaces.
|
|
The NB slide way is a non-recirculating linear motion bearing utilising precision rollers. It is used primarily in optical and measurement equipment, where high precision movement is required.
The NB slide table is a precision table equipped with a slide way. Its high-precision and low friction characteristics make it well suited for use in electronics automatic assembly machinery and optical devices.
The NB gonio way is a curved SV type slide way. It is used when there is a need to change the gradient, or obtain an accurate gradient angle without changing the center of rotation in high-precision optical and measurement devices.
|
|
|
Rollon’s Telescopic Rail family improves upon all of the characteristics that made our Heavy Duty rails so popular. The Telescopic Rail family offers various types of slides which means that a design engineer can easily find an original solution for each application. All of the products have innovative problem solving designs, and are built to extend heavy loads out from their mounting structure with little or no deflection.
|
|
|
Accuride slides are built into many industrial applications such as commercial and industrial machinery, electronic units and test equipment, and into a variety of transport applications such as emergency vehicles and trucks as well as aircraft, trains, ships and boats.
|
|
|
Schock has been manufacturing ball bearing slides for over 30 years. Our experience and trend-setting achievements have established a brand as an industry leader: the precision slide. The unique physical properties of the ball bearing slide form the basis for the system superiority. Schock provides a reference point in the market by setting the highest standards for quality.
|
|
Thomas Regout International BV, founded in 1834 and based in Maastricht-Netherlands, produces a wide range of telescopic slides. Thomas Regout's slides can be used for all different types of applications, such as the furniture, professional storage, automotive, trade and industry markets.
Besides our wide range of stock-items, we are also specialized in custom made solutions. We can offer you a high quality product range with different kinds of features according to your needs.
|
|
CHAMBRELAN designs, produces and sales a very wide range of industrial BALL BEARING TELESCOPIC SLIDES, suited for length from 100mm up to 2 meters with a load capacity from some kg up to 1 ton.
The standard models AVAILABLE ON STOCK cover most of the common uses. However, some slides can be CUSTOMIZED to meet special demands (oven appliances for example).
Our design and production abilities allow us to meet particular demands on ROLLING STOCK INDUSTRY, TRUCK BODY BUILING, MILITARY and MEDICAL uses on every continent.
|
|
LBS-11 (3/4) Extension Ball Bearing Slide
LBS-11- LO (3/4) Extension with Lock-Out Ball Bearing Slide
LBS-12 Full Extension Ball Bearing Slide
LBS-12-LO Full Extension with Lock-OutBall Bearing Slide
|
|
|
Normont offers an extensive line of transportation slides. Our inventory of Accuride extension slides feature high load capacities and are available in many lengths, travel ranges and load ratings.
|
|
Nadella Linear System
With this line of products, NADELLA confirms the aim to provide manufacturing solutions tailored to the user’s needs in order to achieve simple automation at a low cost. The process under way of transferring production automation and relevant handling onto increasingly heavier and cumbersome units has prompted us to seek original and flexible components for the different commodity sectors.
|
|
|
The SR series slides are formed by a fixed rail and an inner mobile rail of the same length. An intermediate ball-cage allows for extension of approximately half the rail length in both directions creating a total stroke.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
