|
|
As a worldwide leading company in changeover solutions Socomec launches a new generation of changeover switches.
Application:
Network / Alternator set
- Industrial generator set control
- ATS solution
Network / Network
- Building services
- Control with or without priority
Originality and advantages:
- ATyS M is a modular changeover system with fully integrated internal security and mechanical and electrical interlocking.
- This innovative concept patented by Socomec combines the benefits of switching technology and fast operation with unique control flexibility.
- The integrated “Manual Security” function is operated via a standard Allen key.
- A complete range of standard accessories is available: bridging bars, voltage sensing kits, positions I-0-II auxiliary contact, terminal shrouds, etc.
Features:
ATyS M is a product family for electrical changeover applications up to 160 A.
ATyS M products are available for remote (ATyS M 3s) or automatic (AtyS M 6) control and can be used for all types of changeover applications between 2 networks or between a network and a generator set. |
|
The GE Zenith Controls ZTX Series of transfer switches is built for residential and light commercial critical/non-life safety applications requiring the dependability and ease of operation found in a power contactor professional switch. The ZTX transfer switches are designed for standby applications, and incorporate a double-throw, mechanically interlocked contactor mechanism.
The ZTX transfer switches are equipped with the MX60 Control Panel.This microprocessor includes:
Undervoltage sensing (90% pickup/80% dropout) of the utility source
Voltage and frequency sensing of the professional generator source (90% voltage/95% frequency pickup)
Time Delay Engine Start - 5 seconds (P)
Time Delay Engine Warmup - Transfer to Generator - 20 seconds (W)
Time Delay Utility Stabilization/Retransfer to Utility - 5 minutes (T)
Time Delay Engine Cool Down - 5 minutes (U)
Indicating LEDs for power availability, switch position and load energized
Pushbuttons for test, engine start (manual), generator exerciser, timer bypass and program cancel
Special status annunciation of in-phase transfer and timer operation
Selectable 7, 14, 21 or 28 day (factory set 28 days) generator exerciser timer
Diagnostic LED indications in logical one-line configuration
All time delays are fixed.
The unit is available in open type, NEMA 1 or NEMA 3R enclosures. Additional options include:
A3/A4 Auxiliary contacts (1 each) closed in utility and generator positions
Integrated industrial battery charger 1.5A/12V
Special timer settings |
|
The GE Zenith Controls ZTS Series of transfer switches—the building block of our transfer professional switch product line—has become a hallmark of quality and performance. This ruggedly built power contactor family of switches is available in open construction for switchboard installation or NEMA enclosed to your specifications. They are specifically designed with dependability, versatility and user friendliness as top priorities.
The power panel components, which include power switching contacts, drive mechanism and terminal lugs, are mounted on a specially formed panel for optimum performance. Logic devices such as microprocessor control, auxiliary time delays and special accessory equipment are mounted on the professional door for ease of maintenance and to keep them separated from the power section. They are connected with a numbered professional wiring harness equipped with a disconnect plug that allows the control panel to be isolated for maintenance. |
|
GE Zenith Controls ZTS Series Automatic Transfer switches are the preferred standard for quality and reliability in the electrical industry. The ZTS-MV Series Medium Voltage Automatic Transfer Professional switch provides that same quality for installations from 5kV to 15kV.
Designed for use in the most critical applications, including hospitals, military sites, airports, communications facilities and computer installations, ZTS-MV Series switches fit the need for dependable continuity of power where emergency or standby applications exist. |
|
Ferraz Shawmut offers the most extensive line of fuses worldwide. This line is matched by our line of fusegear. Amp-Trap® UL-CSA fuses line is supported by UltraSafeTM holders line and a complete range of power distribution blocks. For IEC low voltage fuses Modulostar® is a complete and innovative line of holders and disconnectors for ferrule-type fuses, Lindner encompasses numerous solutions of bases, holders, switch-disconnectors for DIN standard fuses, holders also for BS88 standard Blue Dot fuses.
Protistor® fuses for power electronics can be mounted in Modulostar® holders and disconnectors when they are of ferrule-type and in IP20 bases when they are of square-body type.
Ferraz Shawmut offers also non-fused and fused switches. |
|
SIRCO M offers a large number of accessories that are available for all products of the series.
Application
- Distribution Panel – Incoming or feeder
- Panel mounted or DIN modular
- Local safety isolation
- Machine control
Originality and advantages:
- With a limited number of references it is possible to create solutions for various applications.
- The integration of an innovative switching concept patented by Socomec allows for a universal switch within the same product (direct or external operation via a right or lateral side handle).
- All products are modular, of constant depth and allow for quick and easy installation: the switches are Din track or screw-mounted. Most accessories are fixed with snap-on fixing brackets.
- Highly innovative design for a multitude of applications.
- Many accessories such as auxiliary contacts with pre-break and signalisation functions, handles for direct or external operation as well as additional fuse-holder modules are already available.
Features:
- From 16 to 160 A, 3 or 4 pole.
- The association of two 3 or 4 pole ‘standard’ switches with a standardised accessory enables the assembly of:
- 6 or 8 pole load break switches.
- 3 or 4 pole changeover switches (I-0-II) or (I-I+II-II). |
|
The range consists of:
SIRCO DC 40A/SIRCO DC 125A/SIRCO DC 250A
Original features and advantages:
The innovation is at entry level, namely SIRCO DC 40A. This product has no equivalent on the market in terms of compactness and performance, i.e.:
- 8 break points in series per pole to split and extinguish the electrical arc.
- Use of thermoplastic materials to resist temperature rises due to the arc.
- Designed according to UL standards to increase insulation distances.
- Rapid connection and disconnection which is exceptional in equipment of this volume.
SIRCO DC 125A and SIRCO DC 250A circuit-breakers complete the SOCOMEC photovoltaic range.
These are also DC22 -800V with contact geometry designed to facilitate extinction of the electrical arc. |
|
| The primary switched AC/DC modules series PMAS/PCMAS of MTM Power have been designed as a universal compact power supply with AC and DC wide input ranges for worldwide application and allow an efficient, cost-saving solution for different tasks where low and medium power is needed. These modules are available as a standard with single, dual or triple outputs in different power ranges with 5 to 100 W and as special power supply units. The power supplies are vacuum encapsulated, prepared for applications in Class 1 and/or 2 and comply with the Low Voltage Directives as well as the up-to-date EN standards as regards CE conformity. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. MTM Power modules are CB-Scheme, UL and cUL approved. The series are short circuit protected, need no ground load and are designed for PCB (PMAS) or chassis mounting (PCMAS). |
|
Position switching with radio technology
low energy and radio emission
works self-sufficient without battery
different actuataors available |
|
GE ML Disconnects are a turn for the better because they eliminate all the unnecessary complexion in selection, ordering and application.
The ML disconnects are UL508 manually operated horse power rated IEC disconnect switches available in 5 amperage frames from 25A through 125A. Mounting options include front (flush) mounting, either central or 4 hole, and rear mounting - on a panel or Din track, with or without a hinged professional door. Switches may be ordered as open or enclosed (3 through 6 pole with or without 1 NO/1NC auxillary contacts).
|
|
Multi-SWITCH improves electrical supply continuity. The principle of operation guarantees a higher reliability level than that achieved using a single PROFESSIONAL UPS (on-line with automatic bypass) or several UPS in parallel.
The Multi-SWITCH provides electrical distribution and remote management for up to eight network users, powered from two direct mains supplies or UPS or a combination of both.
The Multi-SWITCH can connect each user (up to eight, each with a maximum power demand not greater than 4A), to either of the two power sources (A and B). Load demand is shown on the LCD. See “principle of operation” diagram. |
|
EV100 contactors are designed for use in DC applications with lead-acid professional batteries or rectified power. They perform power switching functions for electric vehicle traction drives as well as pump and other power switching applications.
The contactors have been successfully applied to meet UL standards, and are listed under UL file number AU1793.
- Amp ratings :100, 150 and 300 amps at 50% Duty Cycle
- Voltage : 24 to 80V
Features and Benefits:
- Special bonding of alloy tip material to tip supports maximize tip life.
- Double-break operation assures good contact and minimizes tip bounce time.
- Suppliers of solenoid design allows for smaller size and mounting flexibility.
- Design criteria optimizes tip velocity, pick-up time and low-voltage operation for improved performance with solid-state controllers.
- High-fidelity mechanical operation assures consistent high tip parting velocities.
- Mechanical life in excess of six million operations
- Electrical life in excess of two million operations. Actual life will vary depending on application, duty cycle, maintenance and battery condition. |
|
CONTACTORS
- Three-pole versions up to 630A in AC3 duty
- Four-pole versions up to 1600A in AC1 duty
- Special type for power factor correction up to 60kvar
at 400V
- Special versions with 2NO+2NC or 4NC main poles
- Reversing and changeover contactor assemblies
- Versions in AC or DC control
- Extensive choice of add-ons
- Certified by primary international authorities
MODULAR CONTACTORS
- Two, three and four-pole versions, 20A to 63A
- Very silent during operation or control phase
- Operation flag indicator
- Add-on auxiliary contacts
- Ideal for domestic, service or industrial installations.
MOTOR PROTECTIVE RELAYS
- Thermal overload industrial relays for 0.09 to 420A currents
- Thermal overload relay for motors with long starting time
- Phase failure sensitive and non phase failure sensitive
versions
- Automatic or manual resetting
- Independent or direct contactor mounting
- Thermistor protection relay.
ELECTROMECHANICA STARTERS
- Starter assembly accessories
- Direct-on-line starters in insulated enclosure complete
with or without thermal relay
- Versions with RESET or START/STOP push buttons
- Insulated enclosures for customer-assembled starters
- Complete star-delta starters.
|
|
Contactors
- mini-contactors type CRMI up to 9A AC3 duty
- contactors type CRNI up to 100A AC3 duty
- contactors type CRLI from 110A to 400A AC3 duty
Thermal overload relays
- for the protection of electric motors from overload and phase fault
- adjustable rated range from 0,1 A to 400 A |
|
CONTACTORS
• Complete line (7 to 800A / AC-3)
• Quick mounting on DIN rail 35mm
• Direct mounting on overload relays
• Overload relays with phase failure sensitivity, according to IEC60947-4-1
standard, tripping class 10
• Possibility to install relays separate from contactors using of individual
supports
ACCESSORIES AND SPARE PARTS
• Accessories for contactors from 7 to 300A (modular line)
• Four-terminal coils up to 40A and three-terminal coils up to 800A
• Coils available in AC (50Hz, 60Hz and 50/60Hz) and DC
• Spare parts for the whole line (Ex.: contact set)
MINICONTACTOR CWC
• AC3 operation up to 16A
• Line with AC and DC coil with the same dimensions
• Allows operation under the AC-4 duty
• Low-consumption DC coil
• Complete line of accessories
Contactors for Power Factor Capacitor Switching
• Available for the switching of capacitors suppliers up to 50kvar/400/415V
• Same accessories used with CWM contactors line
• Integrated pre-charge resistors with early-make contacts block |
|
22,5 and 45mm Pitch.
Large control range : 3-32VDC with an input current <10mA whatever the rating voltage and temperature range.
AC control models available.
Green LED visualization on the input.
Very high immunity : Voltage protection on output and input : 4kV according to IEC61000-4-4 & 5.
Models SILD845, SIL855 and SIM855 switch ON in case of overvoltage : autoprotection on AC-51 loads only.
TMS2 Technology with very long lifetime.
I2 t value between 312 and 5000A2 s hence protection against short-circuit on the load possible by Miniature
Professional circuit breakers (MCB).
Low leakage current (<1mA) and low zero cross voltage (<10V) for zero cross SSR. Turn on time for random models.
IP20 housing.
Use screw professional clamp terminals.
No tools needed for mounting and dismounting on DIN rail or direct mounting on panel.
Designed in conformity with EN60947-4-3 (IEC947-4-3) and EN60950 -UL-cUL.
CE mark : made in France with high quality level. |
|
Solid State Contactors are designed for fast and demanding switching of loads such as heaters, electro magnets, transformers and motors. Solid State Contactors are ideal replacement for electro-mechanical devices or mercury contactors. They can switch single and dual phase heaters up to 50 A, and three phase heaters up to 20 A.
Available from 15-50 A
Line Voltage 24-600 VAC 50/60 Hz
Control Voltage 5-24 VDC 24-230V AC
Advantages
The contactors are burst fired for reduced EMC emission, have LED status indicators and accept universal control voltage ranges. The units are panel or Din track mountable, complete with heatsink and require no additional components. |
|
| The 755 Magnetic Latching relay, with an 11 pin octal base, operates by using a pulsed input. A permanent magnetic maintains the last position until a redirected second pulse moves the contacts back to the original state. |
|
Our medium voltage vacuum contactors cover a range from 1000V ... 7200V and from 320A ... 800A.
Please ask us for more details! |
|
... see all the products in the category
Contactors
|
|
|
