|
|
For the safe transportation of hazardous substances within the work place
Transport drums safely
Can also be used with dispensing racks to store drums horizontally
Sump capacity: 60, 205 or 230 litres
- Wheels are available in polyamide or anti-static versions
• manufactured from environmentally friendly PE or steel
• can be used with acids, alkalis, flammable liquids etc.
• with two fixed, two swivel wheels with brakes and a handle, the sumps are suitable for work involving transportation indoors
|
|
Because an ounce of prevention is better than a pound of cure, Engels has built up a wide range of drip trays. In addition to a wide range of standard versions, Engels can supply customised drip trays.
All drip trays are made of polyethylene and are thus resistant to virtually all chemicals. Naturally our drip trays meet the relevant environmental standards. The standard drip trays can be supplied in various volumes and versions. The drip trays can be delivered with galvanised or plastic grids.
|
|
|
Sumps and pallets manufactured by Denios have been approved for the storage of water pollutants and flammable liquids, meets the requirements of environmental regulations, Sumps are either painted or hot dip galvanized
|
|
|
Spill pallet for 2 or 4 drums • Removable platform • For static spill containment • Remove drums before fork lifting • Compatible with most forklifts and pallet trucks • 100% polyethylene.
|
|
|
|
|
|
3 mm carbon steel construction. Bent with a fibre system and equipped with structural reinforces.
Weldings with electronic control of the edges and of the gaseous mixture to assure perfect waterproofing. Layout, tolerances, rims, chamfers, nominal weight and finishing grade according UNI parameters.
External anti-corrosion treatment obtained with visible anti-oil and antiacid resins, safe in compliance with ISO 3864 and CEE 77/576 - L 229 regulations and following modifications. Hot-galvanized carbon steel grate with heavy load resistant handles, put on the ?L? welded profile perimetre and ( for some models) central reinforced omega.
Each drum rack has a safety labelling for accident and pollution prevention in compliance with current, EC and national regulations (D.L.22 of 05/02/1997, D.L. 626/94, D.L. 915/82 and following modifications.)
Registration and trial testing by hydraulic test made at full load for 48 following hours at atmospheric pressure at room temperature, in compliance with legislative decree of 11/05/1999 n. 152, DPR 915 of 10/09/1982 and following modification.
SAFELY LABELING
PRODUCT IDENTIFICATION LABELING
SINGLE PACKING
OPTIONAL ITEMS UPON REQUEST:- SPECIAL COLOURS - SPECIAL RESINS - COMPANY LOGO - STAINLESS STEEL COVERING - GRIDS
|
|
A range of spill control products to protect you against the consequences of leaks and spills from containers of potentially hazardous or polluting liquids.
- Complete peace of mind : LINPAC Allibert's spill control
products are strong 100% plastic one-piece mouldings
with no welds, producing a reliable secondary containment unit for liquid
containers of up to 1,000 litres.
- Economical : corrosion-resistant plastic that will not rust or
leak and is totally maintenance-free.
- Safe : retains spills and leaks within the sump and prevents
splashes caused by wave movement during transport.
|
|
These collection thanks, made of ecological polyethylene, are ideal for storing various acids, alkaline solutions, oils, non-infiammable chemical substances and many other substances compatible with polyethylene.
Wide and complete range available
|
|
The Sall ecological containers are used for handling, depositing, transferring and storing substances that are harmful for water beds in complete safety without compromising the equilibrium of the environmental system. Besides systems built in steel, the comprehensive range also includes different types in polyethylene for handling corrosive liquids.
|
|
Choose the retention adapted to your needs:
Combine resistor and flexibility of handling with polyester
Privilege solidity and resistor with the flames with steel
Combine flexibility of material and chemical resistor with polyethylene.
Chemo proposes to you a broad range in each one of these nanomaterials and for the following applications:
- storage for small containers and to 4 drums of 220 liters
- mobil storage for small containers and to 2 drums of 220 liters
- the storage of cubitainer of 1000 liters
- storage in evolutionary and flexible platform.
|
|
Made out of polyethylene with steel grating is galvanized or coated epoxy for the RET2.
Very resistant to the chemicals such as acids or bases.
|
|
Build a storage area to catch leaks and drips from extra-heavy loads. The PIG® Modular Spill Deck features a massive 50,000 lb. weight capacity UDL!
Our containment solutions include containment pallets, hazardous spill containment units, oil tank containment items, tanker truck containment products and much more. Other heavy-duty spill containment products include containment decks, roll tops and covered pallets. For industrial supplies, leak and spill solutions and spill containment products, trust New Pig.
|
|
Metal vat with guard security body tubular or covered with sheet metal for the several barrel or installation of 1 or cubitainers, volume of retention according to the needs; sealing tested in factory; caillibotis of meshs 30 X 30 mm galvanized hot; height under foot 100 mm out of standard; Passage for displacement with the lifting truck and transpallet. Special achievements on mesure.FABRICATION FRENCH
OPTION: raise for barrels or cubitainers, coating antiacids; caillibotis out of antacid fibers, etc ..........
The standard vat of retention "Protec box" is a simple solution and ideal for your liquids requiring a retention in the event of accidental escapes (Pollution) in order to preserve our environment. Its guard of security body tubular or covered with sheet metal on 3 sides avoids the falls of your barrels in the event of displacement of the vat to the lifting truck or transpallet.
|
|
RANGE EP
- Polyethylene Construction (rotomoulage)
- Great resistance to the chemicals and pollutants - Absence of corrosion
- Handling by bus with forks and transpallet
Alternatives:
1 Platform of retention.
2 approach Ramp.
3 Platform of retention without grating.
4 Laboratory rétent.
5 1 barrel with tiller Rolls.
6 barrel Claw 220 L
7 Container retention
8 Trunk with salt, sand
|
|
- Robust tack welded steel Construction
- Exists in 2 models: for strong density and average density - Handling by lifting truck
- Double Locking
- E.C. Conforms, validated by an organization of control
Options:
- Wheels for manual displacement
- Galvanization
- Lid
|
|
|
A range of GRP gratings made from Isophthalic resin making them more corrosion resistant than Securiline. Ideal for applications where contact with corrosive substances is substantial : certain manufacturing, chemical processing plants, Nuclear Power Stations, certain offshore, etc. All areas where there are walkways and stairways prone to slippery conditions.
|
|
All our spill pallets, racks and mounts are manufactured with rotomoulding in a single HDPE piece, UV treated, with ISO 9002 certificate for food industry and compatible to a large number of chemicals.
They are stackable when empty and are provided with removable plastic grid for easy cleaning.
Safe, resistant, efficient, long-life and user friendly.
Our nice shape spill pallets are yellow painted with following advantages: to call attention avoiding accidental bumps and easy identification of drum leakages.
|
|
Main features :
- 100% recyclable stackable pallet
- Reusable pallet with long service life
- Economic, environmental and efficient alternative to wood pallets or skids
- One-piece drum pallet features four molded-in rings to secure 55 gallon drums during transportation
- Now available in fire retardant material. Approved by Factory Mutual as meeting fire requirements equivalent to wood pallets. (FM)
- Underside rings for secure double stacking
- Pallets fit side by side in standard trailers
- Ideal for use in pharmacuetical and chemical applications
- Fork Truck Entry: 4-way
- Pallet Options: Hot stamp, molded-in logo, ID plates
|
|
Vat of retention in PEHD high density treated anti UV with galvanized steel grating which can be protected by the epoxy one.
Very resistant, this vat and these pallets make it possible to store to barrels of 200 liters.
Without maintenance, the PEHD resists the majority of the corrosive substances.
Manutentionnable by lifting truck or transpallet.
Possible storage of barrels of 200L without grating thanks to its interior forms.
|
|
Vat of retention in PEHD high density treated anti UV with galvanized steel grating which can be protected by the epoxy one.
Very resistant, this vat and these pallets make it possible to store to barrels of 200 liters.
Without maintenance, the PEHD resists the majority of the corrosive substances.
Manutentionnable by lifting truck or transpallet.
Possible storage of barrels of 200L without grating thanks to its interior forms.
|
|
Ideal for the storage of the dangerous and flammable products.
Pallets for barrels of 200 liters and container of 1000 liters.
Conform to the French legislation for sites classified for the storage of the barrels and the GRV (except AW8).
All these pallets for barrels of 200 liters have a holding capacity taking again the totality of the barrels (except AW8).
These pallets are declined in 2 categories, enamelled or galvanized in ISO1461. Manutentionnable by transpallet and lifting truck.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 