|
|
|
|
|
|
LINAK has introduced a series of different control boxes - from small control boxes suitable for operating one or two actuators to sophisticated basic control boxes with microprocessors suitable for operating six actuators.
The most simple and the most advanced control boxes
The most simple control boxes are only able to convert control signals from the handset into operating voltage for the actuator whereas the most advanced control boxes have functions such as parallel running of several actuators and memory drive. Moreover, the most advanced control boxes are those controlled by microprocessors. These can be delivered with customised software.
Furthermore, some control boxes are designed for connection to the mains, for example, mains voltage of 100, 120 or 230 / 240 V AC for use in different countries; others have an internal or an external battery. Versions with both battery and mains are available too.
Safety features
Most LINAK control boxes are designed to provide Electronic Overload Protection (EOP). This means that it protects the actuator against overload by disconnecting the current when the actuator is fully extended or retracted or if an overload occurs during operation. The control boxes are also designed so that they will short-circuit the motor terminals (poles) when the actuators are not running. This solution gives the actuator a higher self-locking ability.
|
|
Pit bottom switches with knob or interlocked lever, recall drive units with socket outlets,
inspection boxes from 4 up to 8 functions.
Fully compliant with EN81..EN60068-2-6 - Resistance to vibrations - EN60068-2-27
Resistance to shocks. All components of the GM series are designed to the relevant
standards, hence ensuring the correct creepage and clearance distances
after possible vibrations and shocks.
|
|
ComEx is a flexible system offering standard as well as customer-specific local control and indicating units.
You have the choice between three standard enclosures which can accomodate up to three different control and indicating devices. Combinations of up to three ComEx enclosures are possible.
Either stuffing box glands in M20 x 1.5 and M25 x 1.5 made of plastic or cable glands made of metal are available for the electrical connection. The plastic glands require no lock nuts. Metal glands are screwed into a metal earth plate sheet inside of the enclosure. Maximum amount of cable clands: two off M20.
To ensure easier operation on site, each enclosure can be equipped with an individual info-label. For offshore applications special oil-resistant attachments are available.
|
|
Push button stations for small hoist applications, for control circuits in both single or double
row versions, for control and direct switching power circuits, for tail lifts control.
|
|
|
|
|
|
Wired Pendants
Wired Pendant Overview
Kar-Tech's wired pendants are the industry standard in machine control in the mobile crane market, and have been successfully used across the construction equipment industry. Made of high-impact plastics, and using only the most ruggedized & sealed switches, buttons, and indicators, these are products designed to take whatever the job site can throw at them. Standard configurations run between two and ten switches with or without variable speed trigger for precise machine control, but variations are common and easily accomodated. Kar-Tech's pendants are available in a range of colors, and with different user-interfaces and connectors easily available and integrated into the final design. Our pendants can be as simple as switched power, or incorporate our best-in-class electronics for advanced features.
At A Glance:
- Built to LAST: High-strength, impact-resistant plastics.
- Built for YOU: Wide range of colors and options available.
Basic Technical Info:
Kar-Tech's wired pendants are built of a high-strength, impact-resistant plastic, and if electronics are incorporated, operate between -40 and +85C. Only top-of-the-line sealed switches, paddles, connectors, etc are used to prolong the pendant's life.
Typical Applications:
- Stick Boom Cranes
- Gantry Cranes
- Road Machinery
- Drilling
- Agricultural Equipment
- Forestry Equipment
Our wired pendants have taken a beating in hundreds of different market sectors.
Available Options
- Variable Speed Trigger: Proportionally control your valves!
- In-pendant valve driver electronics
- Custom colors, connectors, decals
|
|
|
|
|
|
HD and WP stations of heavy duty steel or aluminum may be pendant or surface mounted. They are shipped fully assembled and ready for customer connections.
PBC, WPBC, and XPBC are cam operated stations assembled in a variety of enclosure types. These stations are available with special circuit configuration and can be from one to five speeds, stepped or stepless operation. Many options are available for this type of station, including duplex construction with conduit boxes selector switches and many other special features.
CPB pendant stations are our most compact, ergonomic pendants. Available in single or two speed operation with NEMA 4X construction and CSA & UL Approval.
PBP pendant stations are weatherproof, heavy duty rubber stations with plug in pushbutton inserts, from one to five speeds. Components are readily available from our stock.
PBM pendant stations are lightweight and ergonomic and use 22mm operators. One through five speed buttons are available. Enclosures are NEMA 4X construction with CSA & UL Approval.
|
|
|
At the heart of every electrical system is the control station. Even under the most adverse conditions, CEAG's control stations can be used and operated reliably.
|
|
|
|
|
|
Handheld terminal HBG_20
- Decor-membrane / short-travel keys 3 x 3-key matrix
- Integrated three-step consent switch
- Integrated EMERGENCY OFF, two-channel 2 NC, 1 NO
- 2 x rotary selector switch, 6-step BCD for example, for preselection
- Integrated cable: length 5m
- Integrated hand wheel (100 graduations, magnetic indexing)
- Housing made of impact-resistant plastic / protection class IP65
- Connection kit
- Universal magnetic mounting
- Option: customised printing, customer logo
Handheld terminal HBG_20
- Membrane keyboard 2 x 3-keys, operated individually
- Hand wheel (100 graduations, magnetic indexing)
- Integrated EMERGENCY OFF, two-channel 2 NC, 1 NO
- 3 x rotary selector switch, 6-step BCD for example, for preselection, override
- Integrated cable: length 5m Various connection options
- Housing made of impact-resistant plastic / protection class IP65
- Connection kit
- Universal magnetic mounting
- Option: integrated three-step consent switch
Option: customised printing, customer logo
|
|
COMPAUT specialist recognized in the electronic cranks, offers a very complete range of generators d’ impulses to be gone up on desk or to integrate out of mobile case.
The company also carries out all types of button boxes and cases of remote control, according to your schedule of conditions.
In addition to the usual functions, these portable cranks and these button boxes can receive various possible options:
• Touch dead man
• Posting by RS 232
• Keys proportional
• Side validation
• Potentiometers
• Binary selectors
• Joystick….
For more than 15 years COMPAUT has answered the most various projects of l’ study with manufacture.
NEW: Time reduced by the control in its workshops of all the phases of the realization.
|
|
| ... products without technical information |
| |
The DIALOG PLUS RACK series comprises the 700-1000-1500-2200-3000VA models and uses doubleconversion technology (VFI).
The load is powered continuously by the inverter with an EMI filtered, stabilised and regulated sinewave supply.
The input and output EMI filters considerably increasethe immunity of the load to mains disturbances andsurges, even on bypass.
The UPS can power the load for long periods (usingbattery extension packs) or provide sufficient runtimeto allow shut-down of the protected computer systemsusing the PowerShield³ software, supplied as standard,for Windows 95, 98, 2000, Me, XP, 2003, Mac OSx, 9.x, Linux, NT 4.0, Novell operating systems.
For outstanding power protection and communicationDIALOG PLUS RACK is the best solution for sensitiveand "mission-critical" applications.
|
|
Available in 6 & 10 kVA single-phase output, suitable for 19-inch racks (3U), the Linear Plus RM provides all the advantages of modern double conversion technology.
The Linear Plus RM offers many of the standard performance features of the Linear Plus but in a 3U version, making it ideal for installation in 19-inch rack space.
It is available in both single-phase input and single-phase output configuration and provides the security of a truly redundant parallel system whilst offering the highest degree of reliability for mission critical loads and applications.
|
|
|
|
|
|
Digital Energy™ Match
CE / UL LISTED
The Digital Energy™ Match 19" UPS provides cost-effective and near-perfect power protection for a wide range of 19" rack-mount applications. The units are equipped with RS232 and SNMP interfacing possibilities, allowing them to use the free GEDE software for all well-known operating systems. They are specially designed for typical rack-mount demands, like long backup times, high ambient temperatures, and high over-voltage protection. The attractive design allows front access for battery replacement.
As the batteries are front accessible, they can be replaced in an instant without removing the unit from the rack.
The Match 19" UPS is a microprocessor-controlled, line-interactive UPS. The high efficiency of this UPS leads to significant power savings over the lifetime of the product.
When sourcing a 19" rack-mount UPS from GE, you also get access to valuable services such as solution design, integration within networking environments, customization, maintenance, and training.
|
|
Liebert PSI - 60/50Hz: High-Level UPS performance and reliability for servers and network power protection in 1,000-3,000VA.
Liebert GXT 500VA to 10 kVA - 60/50Hz: True on-line UPS for networks, clustered equipment, and other critical applications. Protects against all power threats. Generator compatible. Internal SNMP capable.
|
|
|
|
|
|
Conceptpower DPA
Newave’s newest modular UPS design Conceptpower DPATM (Decentralized Parallel Architecture) with unique SAFE-SWAP-MODULES (SSM) addresses all the availability concerns related to power protection of mission critical applications. The move to high power density blade servers has caused a shift in the performance of advanced power protection systems. High power density, high efficiency and no power derating with leading loads have become the key features of modern UPS Systems.
Individual UPS modules with three-phase output powers from 10 to 50kVA (8 to 40kW) are plugged into an easily installed cabinet which contains all of the system's input and output distribution components. UPS modules are Safe-Swappable and can be quickly and safely added to the system without risk to the critical load for either N+n parallel redundancy or an increase in system capacity. Safe-swappable modules also facilitate rapid repair times, ensuring system reliability and availability are optimised in all circumstances.
Highlights at a glance
- High power density (200kW per rack); For floor space saving;
- DPA with Safe-Swap Modules (SSM); For premium power protection availability;
- Low Total Cost of Ownership (TCO); Cost saving during entire life-cycle;
- Flexibility / Scalability; Ease of power upgrade, pay as you grow;
- Enhanced Serviceability; Rapid fault recovery;
- Link to Newavewatch; Instantaneous fault recognition.
|
|
|
|
|
|
Digital Energy™ IT Series UL Listed UPS 600VA - 2kVA
Pure Sinewave Output, Line Interactive Tower and Rack Mounted UPS
The GE Digital Energy™ IT Series Rackmount and Tower UPS provide cost-effective, high quality power protection for a wide range of 19" Rackmount and Tower mount applications. The IT Series is a line interactive UPS that has pure sine wave output, which prevents downtime and equipment damage due to power outages, voltage fluctuations and transient surges. All GE Digital Energy™ IT Series UPS's are microprocessor-controlled and equipped with AVR (Automatic Voltage Regulation), making them ideal for server, data storage, networking, telecommunications, and point-of-sale applications.
The units are equipped with RS-232, USB and additional communications slots for add-on accessory communications cards. GE offers a wide variety of SNMP and communication cards to enhance the communication capabilities of the IT Series.
All IT Series UPS's utilize the GE IT Series MONITORing management and monitoring software. The IT Series MONITORing management and monitoring software has the capability to interface with all of today's software operating system platforms. The front panel, multifunction audible alarms and set of six (6) LED's allow for quick visual notification of UPS and battery status.
All IT Series UPS's have hot swappable, user-replaceable batteries. The attractive design of the IT Series allows for front access, facilitating battery replacement. All GE IT Series UPS units come in an attractive, black color scheme and carry a (2) two-year product warranty.
|
|
|
|
|
|
The highest precision for sensitive loads.
Designed to provide the highest precision thanks to its advanced double conversion technology, Active is the ideal solution for those sensitive loads which require a high level of regulation and for those electrical environments where the AC quality is poor. Also available in rack version, Active is a perfect investment to help deliver reliability and robustness to your loads.
Active, available in tower and rack versions from 700 - 3000 VA, features advanced double conversion technology for a maximum protection of your sensitive loads.
External battery packs for extended autonomies are an option, facilitating a modular approach to power management, allowing us to tailor your UPS solution as your loads requirements change.
Its tight output voltage regulation (+/-3%) and wide input voltage (160-276 V) make Active the right choice for sensitive loads and poor AC mains environments.
Active includes a comprehensive and user-friendly front panel which provides the user with information about the UPS status (faults, mode of operation) and parameters (load level, battery level) at a glance.
MopUPS Professional software is bundled with the unit, in addition to other connectivity elements (SNMP slot, RS232 and USB ports, volt-free contacts and RPO optionally, etc). Moreover, together with ManageUPS CIO software, Active is a perfect solution for distributed systems and remote locations.
|
|
GE's Digital EnergyTM GT Series UL UPS series provides high quality power protection in a cost effective package. The GT Series UL is a compact, true VFI (Voltage and Frequency Independent) on-line double conversion high performance device.
The UPS is designed to support and protect mission-critical applications and provide the user with high reliability power regardless of the mains power quality condition. All GT Series UL UPS are microprocessor controlled and equipped with RS232 communication and optional SNMP interfacing capabilities for all major operating systems. Extended run times are available with the optional battery pack.
|
|
The Powerware 5115 Rackmount UPS is a high-density power quality and backup power protection solution ideal for servers, storage systems, network equipment and other critical devices. Delivering basic surge protection and backup power, the Powerware 5115 Rackmount UPS additionally offers the best UPS power protection against five of the nine common power quality problems.
The slim design and wide range of UPS system installation possibilities make the Powerware 5115 Rackmount UPS the most versatile UPS power quality solution available.
|
|
Only 1U thickness (4.4cm)
The ELITE2005RM is an inverter which does not exceed 1U thickness. Very small it is very easily integrated in a bay 19 '' of small size.
Toric Tranformator
The ELITE2005RM is equipped with a toric transformer the purpose of which is to limit the electromagnetic radiation and to increase the output of the inverter.
Voltage regulator
In order to avoid inopportune commutations in battery mode, the ELITE2005RM is equipped with a very powerful voltage regulator. This regulator makes it possible the responsibility of be fed with a tension always very near to the face value.
Protection network RJ45
2 catches RJ45 are at your disposal to protect your chart network or your Modem chart against the storms and the electric shocks.
Intelligent communication
For an optimum safety, L '' ELITE2005RM is sold with a software of supervision and automatic fence of files to be installed on a PC or a waiter.
|
|
Inverter rackable, modular of 0,4KVA with 6KVA.
- Evolutionary in autonomy
- Redundant N+1
- Has fault tolerance (Hot swap)
- Available in ONE LINE and IN LINE
|
|
| ... products without technical information |
| |
... see all the products in the category
UPSs
|
|
|
see the results for the following category : 
