|
|
|
|
|
|
LINAK has introduced a series of different control boxes - from small control boxes suitable for operating one or two actuators to sophisticated basic control boxes with microprocessors suitable for operating six actuators.
The most simple and the most advanced control boxes
The most simple control boxes are only able to convert control signals from the handset into operating voltage for the actuator whereas the most advanced control boxes have functions such as parallel running of several actuators and memory drive. Moreover, the most advanced control boxes are those controlled by microprocessors. These can be delivered with customised software.
Furthermore, some control boxes are designed for connection to the mains, for example, mains voltage of 100, 120 or 230 / 240 V AC for use in different countries; others have an internal or an external battery. Versions with both battery and mains are available too.
Safety features
Most LINAK control boxes are designed to provide Electronic Overload Protection (EOP). This means that it protects the actuator against overload by disconnecting the current when the actuator is fully extended or retracted or if an overload occurs during operation. The control boxes are also designed so that they will short-circuit the motor terminals (poles) when the actuators are not running. This solution gives the actuator a higher self-locking ability.
|
|
Pit bottom switches with knob or interlocked lever, recall drive units with socket outlets,
inspection boxes from 4 up to 8 functions.
Fully compliant with EN81..EN60068-2-6 - Resistance to vibrations - EN60068-2-27
Resistance to shocks. All components of the GM series are designed to the relevant
standards, hence ensuring the correct creepage and clearance distances
after possible vibrations and shocks.
|
|
ComEx is a flexible system offering standard as well as customer-specific local control and indicating units.
You have the choice between three standard enclosures which can accomodate up to three different control and indicating devices. Combinations of up to three ComEx enclosures are possible.
Either stuffing box glands in M20 x 1.5 and M25 x 1.5 made of plastic or cable glands made of metal are available for the electrical connection. The plastic glands require no lock nuts. Metal glands are screwed into a metal earth plate sheet inside of the enclosure. Maximum amount of cable clands: two off M20.
To ensure easier operation on site, each enclosure can be equipped with an individual info-label. For offshore applications special oil-resistant attachments are available.
|
|
Push button stations for small hoist applications, for control circuits in both single or double
row versions, for control and direct switching power circuits, for tail lifts control.
|
|
|
|
|
|
Wired Pendants
Wired Pendant Overview
Kar-Tech's wired pendants are the industry standard in machine control in the mobile crane market, and have been successfully used across the construction equipment industry. Made of high-impact plastics, and using only the most ruggedized & sealed switches, buttons, and indicators, these are products designed to take whatever the job site can throw at them. Standard configurations run between two and ten switches with or without variable speed trigger for precise machine control, but variations are common and easily accomodated. Kar-Tech's pendants are available in a range of colors, and with different user-interfaces and connectors easily available and integrated into the final design. Our pendants can be as simple as switched power, or incorporate our best-in-class electronics for advanced features.
At A Glance:
- Built to LAST: High-strength, impact-resistant plastics.
- Built for YOU: Wide range of colors and options available.
Basic Technical Info:
Kar-Tech's wired pendants are built of a high-strength, impact-resistant plastic, and if electronics are incorporated, operate between -40 and +85C. Only top-of-the-line sealed switches, paddles, connectors, etc are used to prolong the pendant's life.
Typical Applications:
- Stick Boom Cranes
- Gantry Cranes
- Road Machinery
- Drilling
- Agricultural Equipment
- Forestry Equipment
Our wired pendants have taken a beating in hundreds of different market sectors.
Available Options
- Variable Speed Trigger: Proportionally control your valves!
- In-pendant valve driver electronics
- Custom colors, connectors, decals
|
|
|
|
|
|
HD and WP stations of heavy duty steel or aluminum may be pendant or surface mounted. They are shipped fully assembled and ready for customer connections.
PBC, WPBC, and XPBC are cam operated stations assembled in a variety of enclosure types. These stations are available with special circuit configuration and can be from one to five speeds, stepped or stepless operation. Many options are available for this type of station, including duplex construction with conduit boxes selector switches and many other special features.
CPB pendant stations are our most compact, ergonomic pendants. Available in single or two speed operation with NEMA 4X construction and CSA & UL Approval.
PBP pendant stations are weatherproof, heavy duty rubber stations with plug in pushbutton inserts, from one to five speeds. Components are readily available from our stock.
PBM pendant stations are lightweight and ergonomic and use 22mm operators. One through five speed buttons are available. Enclosures are NEMA 4X construction with CSA & UL Approval.
|
|
|
At the heart of every electrical system is the control station. Even under the most adverse conditions, CEAG's control stations can be used and operated reliably.
|
|
|
|
|
|
Handheld terminal HBG_20
- Decor-membrane / short-travel keys 3 x 3-key matrix
- Integrated three-step consent switch
- Integrated EMERGENCY OFF, two-channel 2 NC, 1 NO
- 2 x rotary selector switch, 6-step BCD for example, for preselection
- Integrated cable: length 5m
- Integrated hand wheel (100 graduations, magnetic indexing)
- Housing made of impact-resistant plastic / protection class IP65
- Connection kit
- Universal magnetic mounting
- Option: customised printing, customer logo
Handheld terminal HBG_20
- Membrane keyboard 2 x 3-keys, operated individually
- Hand wheel (100 graduations, magnetic indexing)
- Integrated EMERGENCY OFF, two-channel 2 NC, 1 NO
- 3 x rotary selector switch, 6-step BCD for example, for preselection, override
- Integrated cable: length 5m Various connection options
- Housing made of impact-resistant plastic / protection class IP65
- Connection kit
- Universal magnetic mounting
- Option: integrated three-step consent switch
Option: customised printing, customer logo
|
|
COMPAUT specialist recognized in the electronic cranks, offers a very complete range of generators d’ impulses to be gone up on desk or to integrate out of mobile case.
The company also carries out all types of button boxes and cases of remote control, according to your schedule of conditions.
In addition to the usual functions, these portable cranks and these button boxes can receive various possible options:
• Touch dead man
• Posting by RS 232
• Keys proportional
• Side validation
• Potentiometers
• Binary selectors
• Joystick….
For more than 15 years COMPAUT has answered the most various projects of l’ study with manufacture.
NEW: Time reduced by the control in its workshops of all the phases of the realization.
|
|
| ... products without technical information |
| |
|
Pressure tanks made of galvanised steel or stainless steel are available in many sizes (1 litre - 250 litres). Due to uniform, pulsation-free material transfer from tank to gun, a first class spray pattern and a high working speed is achieved. If necessary, pressure tanks can be fitted with air-powered or electric agitators in order to achieve high hue accuracy and a homogeneous surface finish. WALTHER PILOT offers complete systems for all requirements. WALTHER PILOT manufactures pressure tanks in accordance with strict requirements of pressure equipment Directive 97/23/EC. In accordance with Directive 94/9/EC (ATEX), WALTHER PILOT has the approval for manufacturing equipment for appropriate application in areas exposed to explosion threats. Furthermore, we are certified to manufacture and approve tanks in accordance with the US-American ASME-code as well as the Chinese Safety Quality License. 10 years of delivery guarantee for spare parts.
|
|
Custom cylindrical tanks and pressure vessels from Allegheny Bradford are ideal for pharmaceutical, biotechnology fine chemical, cosmetics, food processing and other ultra pure manufacturing environments. Our engineering specialists and skilled craftsmen work closely with you to design and fabricate vessels for your individual applications. Whatever your processing needs, from mix and transfer tanks to bioreactors and process vessels, Allegheny Bradford offers the superior quality and personal service you require. To meet our client's growing needs Allegheny Bradford has added new fabrication facilities and upgraded equipment for increased capacity and improves operational efficiency. As a result, we can deliver a wider range of quality tanks, including larger component equipment and process skids, faster than industry standards. We are committed to excellence in designing and manufacturing stainless steel tanks and vessels that meet the highest standards for performance and quality
|
|
Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure. The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure) safety pressure relief valves and Manual, Rotary or Oscillating agitation types are available to provide the best quality agitation.
Binks Pressure Feed Containers are constructed from the highest grade materials and fully comply with European and Global pressure regulations including PED, ATEX and ASME.
|
|
For all tasks requiring continuous application of substantial material / paint quantities at a steady pressure, SATA paint pressure tanks are the ideal solution. Different tank sizes, ranging from 2 to 100 iters, and variable pressure adjustment allow almost unlimited possibilities. Accessories dedicated to special tasks, such as manual, pneumatic or electric agitators are available.
Both low viscosity paints and high viscosity or abrasive materials can be applied swiftly and without problems with SATA paint pressure tanks. There are no moving parts and, therefore no wear and tear. All material-conveying parts can be supplied in stainless steel to special order. Work becomes especially profitable if the pressure tank size can be adapted to the original material container; reducing cleaning to a minimum as the original material container is simply inserted into the paint pressure tank.
|
|
|
For simple, cost effective cold glue supply of low viscosity materials at pressures up to 6 bars (84psi), pressure tanks with 0,75 liters (0.2 gallons) to 12 liters (3.2 gallons) capacities are a reliable solution.
|
|
Differents types:
Direct Drive Agitator - Air Powered direct drive agitator assembly with 1/2 hp air motor and a three bade propeller to keep materials in suspension even with high solids.
Indirect Air Motor Drive - Standard duty, smooth running with gear reducer, 1/2hp, 15:1 ratio, 20 to 120 RPM. Inc throttling valve, fittings and hoses for connection to air supply on tank lid. Air consumption is approx 6CFM @ 50RPM.
Reciprocating Air Motor Drive - 180° reciprocating action provides excellent agitation of all types of materials. Particularly important for waterborne shear sensitive materials. Very low air consumption
|
|
Process Solutions manufactures a wide range of tanks:
Capacities: .5 gallon to 5,000 gallons
Materials of construction: Stainless Steel (T-304/T-316L), Steel, Polyethylene, Polypropylene, C-276
(Hastelloy ©)
Configurations:
a. Cylindrical
flat bottom, cone bottom, dish bottom, sloped bottom
horizontal or vertical
closed or open top
ASME or process vessels
b. Square/Rectangular
Finishes:
Stainless Steel: 2b-mill finish, 2b-mill finish with welds ground and polished, #4 mechanical polish, #7 mirror
C-276: 2b-mill finish, 2b-mill finish with welds ground and polished, #4 mechanical polish, #7 mirror
Aluminum: 2b-mill finish, 2b-mill finish with welds ground and polished, #4 mechanical polish, #7 mirror
Steel: painted per specifications.
Plastic: FDA approved material available in various FDA approved colors - standard is natural (white).
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
